Crystal Image Technologies RM-K24A-R User manual

- 1 -
LCD Drawer User Manual
Screen Pivot Version - RM-K24A-R

- 2 -
This manual, covering various aspects of the equipment such as installation, setup and
cascade, will help you make full use of this LCD KVM Drawer. Please read this manual
carefully and install and operate the equipment according to the manual to avoid damage to
this product its accessories.
Product package includes following items:
1 * 24 inch LCD KVM Drawer;
1 * AC Power Cord
1 * Rack installation bracket ( one pair )
1 * USER’S manual
Please check items above. If any item is missing or damaged, please contact your dealer
promptly.
1.8 Meter USB A Type cable
1.8 Meter HDMI cable1 *
1 *
1.8 Meter Display port cable1 *

- 3 -
Table of Contents
1 Introduction …………………………………………………………………………-4-
1.1Overview…………………………………………………………………...….
-4-
1.2 Functions & Features…………………………………… ……………...…..-4-
1.3 Hardware Requirement……………………………………………..….……-4-
1.3.1 Host Requirement………………………………………………....… -4-
1.3.2 Cables…………………………………………………………...….… -4-
1.4 Product Specifications………………………………………………..….…..-5-
1.5 LCD Specifications………………………………………………….…..……-5-
1.6 Front View………………………………………………………….…..……. -6-
1.7 Rear View……………………………………………………………..….…...-7-
2 Installation……………………………………………………………………...……-8-
2.1 Rack Installation……………………………………………………………… -8-
2.2 Standard Installation……………….………………………………….…… -11-
2.4 LCD OSD Menu Setup………………………………………………..….… -12-
3 Certificates………………………………………………………………..….….… -13-

- 4 -
1 Introduction
1.1 Overview
The RM-K24A-R rotating LCD KVM integrates keyboard, LCD display and touch pad in
a drawer 1U LCD drawer and provides a convenient space-saving design for for KVM
switch technology, combining a 24" LCD display with an integrated keyboard and touchpad.
The RM-K24A-RKVM console is a control device integrating a 24” LCD, 104 keys keyboard
and touchpad mouse. You can maximize screen size with the 1U rotating LCD console drawer.
This LCD KVM console is the best choice to save time and space. Since all hosts can be
controlled from a single main control terminal, using the LCD KVM Console:(1)avoids the
cost of keyboard, mouse and monitor of each host; (2) saves work space; (3) saves power;
(4) saves the trouble of moving from one computer to another. (with KVM Switch)
* For Mac and Sun hosts, USB cable must be used for connection.
1.2 Function & Features
The RM-K24A-R KVM rotating rackmount monitor takes up 1U in height to maximize
space with a large screen, supporting resolution up to 3840 x 2160. It meets the 1U EIA
19" rack specifications and is designed to install into19 inch chassis. No need to
install additional software or hardware.
1.3 Hardware Requirement
1.3.1 Hosts Requirement:
(1) DP, HDMI graphic card
Note: the max. resolution of the integrated LCD display is 3840 x 216, @60Hz. Make sure the
resolution of any connected computer does note exceed this resolution.
(2) USB port for keyboard and mouse.
1.3.2 Cables
(1) HDMI cable male to male
(2) Display port Cable male to male
(3) USB A Type Cable
(3) USB 2.0 Hub for peripheral USB device

- 5 -
1.4 Product Specifications
Model KVM-2401WPD-M5-4K
Brightness 300cd/m
Contrast 1000:1
Angle of visibility 178°(H),178°(V)
Keyboard
Mouse
104 keys
touch pad mouse
Color display 1.07 Billion color
Keyboard/Mouse
HDMI2.0
Display port 1.4 Display port female connector (HDCP2.2)
Local Control
Terminal
USB 2.0 For USB peripheral device
Video resolution 3840 x 2160 @ 60Hz
Power supply
Housing Metal housing
100-240V AC 50/60Hz via IEC Type power cord
HDMI female connector (HDCP2.2)
USB 2.0
1920 x 1200 @ 60Hz
1920 x 1080 @ 60Hz
Weight 20Kg
Dimension(W x H x D)
448 x 44 x 690 (mm)

- 6 -
1.6 Front View
NO Part Function Description
1 Handle to adjust screen opsition
2 LCD display
3 Keyboard
4 Touchpad
7
2
3
4
6
1
5
5 LCD OSD button
6 Mounting bracket Install into rack cabinet
7 Lock button Auto lock / release when lcd pull up and down
LCD button to control Screen Display position and
image setting.
8 USB2.0 HUB port
8

- 7 -
1.7 Rear View
No Component Function Description
1 AC Power port Standard IEC Type AC Inlet
2 Power Switch Rock switch, turn on/off equipment main power.
3 Display port Connect to server.
4 HDMI port Connect to server.
5 USB port
6 USB 2.0
1 2 3 4 5 6 6
Connect to server.
For USB peripheral device

2 Installation
2.1 Rack Installation
Step one
Step two
Aach the two rear slide rails to the rear ve cal moun ng rails of the rack cabinet usingstandard M6 cage
nuts
Loosen screw Aon both sides to slide out and remove the two rear slide rails.
and screws.
Step three4
Posi on the LCD console drawer so the two rear slide rails will slide into the main body of the LCD console
drawer. A ach the moun ng ears of the LCD console drawer to the front ver cal mo ng rails of the rack
cabinet using standard M6 cage nuts and screws.
- 8 -

Step 4444444444444four 4444444444444444
Step 4444444444444five 4444444444444444
Step 4444444six 4444444444444444
U nlock 3 3 to
Latch (C)
Unlock Latch (B) to the left. Slide out along with the rail.
Unlock Latch (B) to the left again to lift up LCD.
(D) to the right.
adjust screen angle by holding the handle
- 9 -

Step 4444444444444seven 4444444444444444
Step 4444444444444eight 4444444444444444
3. Adjust the latch (C) to stable LCD module at operating position
1. After operating, follow Step 7---> 6 ---> 5 ---> 4 to store the LCD drawer.
- 10 -

- 11 -
2.2 Standard Installation
Please follow the installation drawing and instructions below for standard installation:
* Please turn POWER OFF on Equipment to be Connected
* Please Pay Attention to Grounding of Equipment
The standard installation is completed, and LCD KVM console can be powered on. Then
power on connected hosts.

- 12 -
2.3 LCD OSD Menu Setup
OSD Control buttons
LCD OSD can establish and setup LCD display. Setup instructions of four buttons are as
follows:
Button Functions
POWER Turn on or off the LCD Display
MENU Activate OSD menu, select a menu and press MENU key to confirm the
selection and enter the submenu.
▲Press this key to increase setting or scroll up the menu bar
▼Press this key to Decrease setting or scroll down the menu bar
Auto/Source press to seletion video input

- 13 -
3 Certificates
FCC
This product has been tested and is proved to meet requirements of Grade B electronic
devices and specifications of Section 15 of FCC certification. Please observe following two
conditions in operation that:
(1) The equipment will not generate any harmful interruption.
(2) If the equipment is interrupted, it may cause unnecessary operations.
CE
This equipment complies with regulations of EN55022:CLASS B.
RoHS
The whole package including products, packaging materials and documents meet RoHS
equipments.