CTA PAD-KMS User manual

Installation Instruction

2
1
A
B
3
C
D
E
F
P1
A-A
A-B
A-C
B-A
B-B
C-A

P2
Special Function
Item Description
A Attachment Button
B Legs
C Attachment Socket
D Button for Vertical Extension
E Up Bracket
F Down Bracket
Product Component
Item Description Qty.
1 Tablet Stand 1
2 Tablet Mount Base 2
3 Universal Holder 1
Hardware Kit
A-A 3mm Allen Wrench 1
A-B 4mm Allen Wrench 1
A-C 5mm Allen Wrench 1
B-A Ø5*1" Wood Screw 2
B-B White Anchor 2
C-A Ø5*19mm Wood Screw 2

P3
Diagram of Operable Parts

G
H
I
K
L
J
※If joints begin to lose tension with use, you can tighten using included Allen keys.
Remove caps G&H to adjust joints J&K.
Use "A-A" + "A-B" to adjust the tightness of
I
&
J
.
Use "A-B" + "A-C" to adjust
K
.
Use "A-B" to adjust
L
.
P4
Joint adjustment

4.02
102
mm
Concrete Wall
B-B
B-A
2
P5
※ If you are installing on wood wall or cabinet, drill hole of
4.20mm. Use C-A instead of B-A. There is no need to use B-B.
Mount Base Installation：
1. Drill hole of 7.30mm and then push B-B into wall. Use B-A to screw
2
.

B
2
Concrete Wall
P6
2. Fold
B
and insert it into
2
.
Note: be sure wall mount is tightly secured to wall before inserting tablet.

P7
Mount Base on wall
Mount Base under cabinet

1
B
A
1
B
P8
Forward position：
※ Do not let tablet exceed the front end of
B
, plane
A
,
to prevent
1
from toppling and damaging tablet.
Backward position：
※ When in backward position, do not let
1
exceed plane
B
to prevent
1
from falling backwards and damaging tablet.
Note for Table-top Stand

8.98
228
mm
2.23
56.6
mm
3.20
81.4
mm
P9
Dimension of Folded Stand

D
E
F
P10
Attachment Description 1：Press button D and extended arm F wide enough to fit tablet
diagonally. Then release button D.
Attachment Description 2： Place tablet corner against E and press D. Then slide F back
tightly against tablet corner.
Attachment Description 3： After tablet is secured, release D. Check to be sure tablet is
held tight.

AT
2
7
A
C
Attachment Description 4：Press
A
to take off or attach
C
.
* Note: After attaching, be sure the two items are fastened
properly before using inserting tablet.
AU
Attachment Description 5：After attaching, turn tablet clockwise
or anti-clockwise to get the best view.
Attachment Finished
P11

AX
P12
X2 X2 X4
Add spacers for more room between cabinet or wall
and mount if necessary using larger screws provided.