CTA CP-CSWMHW User manual

TORSO-ONE
1 Android & iOS Tablet Mount
What's in the box
Tablet mount
Tablet mount keys (2)
Tablet mount
Allen wrench
Penta-Nuts (4)
Penta-Nut keyWashers (4)
Allen wrench
Screws (4)
Android & iOS Tablet Mount
Installation Guide
Attach your tablet to Kosmos AI Station using the CTA Digital
Compact Security Mount (MFR # CP-CSWMHW).

Android is a trademark of Google LLC.
©2023 EchoNous, Inc. EchoNous and KOSMOS are registered trademarks of EchoNous, Inc. P007890001 Rev A
Caution: Federal (United States) law
restricts this device to sale by or on the
order of a physician.
Note: Not all features are available in all
markets, please check with your local
representative for availability in your
region.
Customer Support
Call 18448540800
Email [email protected]
Set up
Installing the Tablet Mount to
Kosmos AI Station
1. Attach the tablet mounting plate
to the mounting plate of the AI
Station as shown.
Use the Allen wrench for the
screws and the Penta-Nut Key to
tighten the tablet mount to the
mounting plate.
Installing the Tablet
2. Insert key into locking lap and
turn counter clockwise to unlock.
Pull back lap and slide corner grip
open.
3. Insert tablet corner against ixed
end, slide opposite corner grip
down.
4. Push lap back in and turn key
clockwise to lock again.
Adjusting Tablet Holder
5. Use the tablet mount Allen wrench
to adjust the angle of the tablet.
Electronic versions of the Kosmos User Guides may be viewed and
downloaded at echonous.com/resources
Printed versions of the Kosmos User Guides may be requested by emailing
[email protected] or by calling 1-844-854-0800.
1.
2.
3.
5.
4.