CTM International 69080 User manual

Instructions d’ assemblage pour la lanterne solaire # 69080
Parts list
A - 1
B- 1
C- 1
D- 1
E- 1
F- 2
G- 1
H- 5
I- 3
J- 1
ATTENTION
DO NOT RETURN THIS ARTICLE TO THE STORE
CUSTOMER SERVICE CENTER
Thank you for purchasing your new fountain.
Should you encounter problems after following all the steps herein contained please contact our
customer support: Call 1-866-231-8893 or email: [e-mail]
Kindly provide the model #, place and date of purchase and a short description of the problem

Solar Lantern Assembly instructions : 69080
1. Carefully unpack all components before discarding packaging
2. Install part C on part B (Fig.1)
3. Install the lens part E to part B (Fig.1)
4. Put switch to OFF position for optimal battery charging(Fig.2)
5. Install the batteries with the correct polarity positions(Fig.3)
For the first time use, let the batteries charge for a period of 8 hours in full sunlight
Place the switch to the ON position for normal use.
Place the lantern is a sunny location in order to ensure proper battery charge
Replace the batteries when needed with the same type only; (Ni-Mh) AA 800MAH
Hand clean with a humid cloth only.

Part 2 :
1. Unpack carefully and assemble solar lantern as per separate instructions. See Fig (3)
2. Make sure the lantern is switched to on Fig.(2)
3. Insert threaded bolt through the top as shown Fig.(4)
DIAGRAM