CubiScan 150-T User manual

CUBISCAN 150-T OPERATION
QUICK REFERENCE GUIDE
TOUCHSCREEN OVERVIEW
SUMMARY
This quick reference guide provides an overview and instructions for operating the Cubiscan
150-T. For more detailed instructions, see the Cubiscan 150-T Operations and Technical Manual.
The Cubiscan 150-T is used in distribution, receiving,
direct fulfillment, and space optimization. The Cubiscan
150-T was designed with large and heavy packages and
parcels in mind. It comes equipped with the largest
measurement range and weight capacity of our smaller,
stationary, or portable dimensioning systems. Mounted
on locking casters, the Cubiscan 150-T can be operated
in a fixed position or quickly moved and redeployed
when necessary.
Buttons/Indicators
L, W, H
Wgt
Dwgt
Meaning
These display the measured dimensions in inches or centimeters.
This displays the measured weight in pounds (lb) or kilograms (kg) as
selected.
This displays the dimensional weight in pounds (lb) or kilograms (kg) as
selected.
This indicates that the scale platform is empty and ready to receive a
package.
This indicates that the Cubiscan 150-T is ready for cubing and weighing.
This displays the dimensional factor currently being used to calculate
dimensional weight.
Tap this key to reset the sensors and scale to “zero” (make sure the
platform is empty).
Ready (indicator)
Factor
Zero (button)
Tap this key to prompt a measurement. The weight and dimensions of
the object on the platform will be displayed on the screen.
Measure (button)
->0<- (indicator)

MEASURING OBJECTS
1 Turn the Cubiscan 150-T on.
2 Zero the scale if needed and
place the package or object to be
cubed and weighed on the
platform against the front edge of
the platform. The ->0<- indicator
light should go out.
The package must be within the black lines on either side of the
Cubiscan 150-T, and it must extend at least one inch on each side from
the center of the measuring side of the front panel (minimum package
dimensions of 3 x 2.4 x 2.4 in (8 x 6 x 6 cm) for the sensors to properly
register the dimensions).
3 Tap Measure. The length, width,
height, weight, and dim weight of
the package are displayed. The
factor used to determine the dim
weight is also displayed.
4 Remove the package from the
platform. Wait for the ->0<-
indicator to light before placing
the next package on the platform.
V 11/14/17
Copyright© 2018 by Quantronix, Inc.
All rights reserved.