Installation Manual
Model: HZK218C-A
Isolated IR switch controller with flexible IR sensor detector.
Mounting schematics
Attention:
Permanent mains connection must be undertaken only by a qualified
specialist.
Make sure to connect HZK218C only to properly installed mains.Cut connection to the
mains during assembly.
Keep clean of IR-sensor detector to avoid the unwanted action of the sensor.
Make sure that IR-sensor is fixed to the drilling hole, otherwise its function can be
affected.
The IR-sensor reacts on short approaches of objects(newspapers) or human hands. The
IR sensor controller switches on when it detects the object within its detecting range and
switches off when it detects the object within its detecting range again.
Keep away any waving objects within the detection area to avoid the unwanted action of
the controller.
Fig.1
Fig.2
position and mount the IR-Sensor
detector as shown on figure 2 on the
left, and connect the plug to the
controller of HZK218C
Max. load power: 250VA
Sensor input:2m sensor cable with
IR sensor
Max. sensor distance: 5cm~10cm
