Cuisinart SMARTPOWER SPB-7C Series Service manual

INSTRUCTION AND
RECIPE BOOKLET
SmartPower
®
7-Speed Electronic Blender SPB-7C Series
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

3
2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should
always be followed, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. Unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning or removing contents
from blender jar. Never put hands into the blender jar or
container, or handle the blades with appliance plugged in.
2. To protect against the risk of electrical shock, do not put motor
base of blender in water or other liquid.
3. This appliance should not be used by or near children or
individuals with certain disabilities.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged
in any manner. Return appliance to Cuisinart®service facility
for examination, repair, and/or mechanical or electrical
adjustment.
7. The use of attachments, including canning or ordinary jars, not
recommended or sold by Cuisinart may cause fire, electrical
shock, or risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch
hot surfaces.
10. Keep hands and utensils out of jar while blending, to
reduce the risk of severe injury to persons or damage to
blender itself. A rubber or plastic spatula may be used but
must be used only when the blender is turned off.
11. When blender is in ON mode, and LED lights are flashing or
glowing, do not touch cutting assembly, interfere with blade
movement, or remove blender jar cover. Accidentally touching
a speed button may activate the blender.
12. BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on
base unless the blender jar is properly attached.
14. Always operate blender with the cover in place.
15. Never leave your blender unattended while running.
16. When blending HOT liquids, remove measured pour lid
(centre piece of cover) to allow steam to escape.
17. Twist on locking ring firmly. Injury can result if moving blades
accidentally become exposed.
18. Do not use an extension cord with this unit. Doing so may
result in fire, electrical shock, or personal injury.
Regarding your cord set: A longer cord has been provided
so that you will have flexibility in positioning your Cuisinart®
SmartPower®Blender near an electrical outlet. Exercise care
when using the longer cord, to avoid entangling or tripping
over the cord. The longer cord should be arranged so that it
will not drape over the counter or tabletop, where it can be
pulled on by children or tripped over. Excess cord should be
stored in the cord storage area at the back of the blender base
to avoid injury caused by the longer cord.
19. Wash the blender jar, cutting assembly, locking ring, and cover
before first use.
20. WARNING: TO REDUCE THE RISK OF ELECTRICAL
SHOCK OR FIRE, DO NOT REMOVE THE BASE PANEL.
NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR
SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.
21. WARNING: FLASHING LIGHT INDICATES BLENDER IS
READY TO OPERATE. DO NOT TOUCH BLADES.
22. CAUTION: Do not operate your appliance in an appliance
garage or under a wall cabinet. When storing any appliance
in an appliance garage always unplug the unit from the
electrical outlet. Be sure the appliance does not touch the
interior wall of the appliance garage, and the door does not
touch the unit as it closes.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE
This appliance has a polarized plug (one prong is wider than the other).
To reduce the risk of electric shock, this plug will fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
This unit comes with a resettable thermal fuse to prevent damage to the
motor in the case of extreme overload. Simply unplug the unit, rest for
15 minutes and continue.
UNPACKING INSTRUCTIONS
Place the gift box containing your Cuisinart®SmartPower™
7-Speed Series Electronic Blender onto a flat, sturdy surface for
unpacking. Remove instruction booklet and other printed materials
from top of corrugated insert. Next remove the top corrugated
insert. Carefully lift the blender base from the gift box. Remove the
lower corrugated insert containing the blender jar assembly. Use
caution not to tip the jar when removing. Remove any additional
literature from the box. To assemble the blender, follow the
“Assembly” instructions on page 5 of this instruction book. Replace
all corrugated inserts in the box, and save the box for repackaging.
See the “Features and Benefits” section of this booklet for a listing
of all blender parts.
Before using for the first time: Wash all parts according to the
Cleaning and Maintenance section on page 7 of this booklet to
remove any dust or residue.
CONTENTS
Important Safeguards .................................2
Unpacking Instructions ................................3
Introduction .........................................3
Features and Benefits .................................4
Use and Care/Assembly ...............................5
Helpful Reminders ....................................5
Operation ...........................................5
Easy Reference Guides ................................6
Cleaning and Maintenance .............................7
Do’s and Don’ts ......................................8
Recipe Tips .........................................8
Recipes.............................................9
Warranty Information .................................23
INTRODUCTION
Congratulations! You have purchased a Cuisinart®SmartPower™
Electronic Blender. The life of the party, the SmartPower™ Electronic
Blender is engineered with seven speeds that crush ice, including
one speed just for ice crushing. The result is delicious, professional-
quality frozen drinks, from the thickest strawberry daiquiris to the most
flavourful piña coladas.
The SmartPower®Electronic Blender purées, blends, mixes, stirs,
liquefies, and more. So whether you’re making soup, salsa, salad
dressing, or baby food, you can do it easily and quickly. No need
to worry about spills or messy clean-ups, either. The SmartPower™
Electronic Blender comes with a dripless pour spout and touchpads
that wipe clean in an instant.
Like all Cuisinart®appliances, the SmartPower™ Electronic Blender
was designed to bring you years of enjoyment, and it is backed by a
three-year limited warranty.

5
4
FEATURES AND BENEFITS
1. Cover Is easy to use. Just press on, no turning or twisting
required. Tight-fitting seal resists leakage.
2. 2-oz. Measured Pour Lid Allows you to measure and add
ingredients without removing the cover.
3. 40-oz. Glass Jar with Dripless Pour Spout Has a unique,
sturdy, widemouth design and a dripless pour spout for
no-mess pouring.
4. Leak-proof Rubber Gasket (not shown) Holds the glass jar
snugly in position for safe operation.
5. High-quality Cutting Assembly with Patented Stainless
Steel Blades Is strong enough for all blender tasks, including
tough jobs, from ice crushing to chopping delicate herbs.
Note: Blades are sharp…handle carefully.
6. Collar (Locking Ring) Is self-aligning so that the glass blender
jar slides easily into position, eliminating the frustration of
twisting and turning the blender jar to lock into place.
7. Heavy-duty Motor Base Is so sturdy and stable, it will
not “walk” on your counter – even during ice crushing! The
motor is strong enough to handle all blending tasks, including
crushing ice without liquid, and is backed by a three-year
limited warranty.
8. 7-Speed Touchpad Control with Indicator Lights Is easy to
use, read and clean. Seven speeds give you great versatility—
use low speeds for delicate blending all the way up to high
speeds for cheese, garlic, or lemon zest. The red LED lights
clearly indicate what blender speed you are using.
8a. Pulse at Any Speed Button Allows you to pulse at any speed
from high to low, so you can blend ingredients only as much
as needed.
8b. Ice Crush Button This button is preset to the best speed for
crushed ice. However, you can crush ice at any speed.
9. Slip-proof Feet Prevent movement during use and prevent
damaging marks on countertops or tables.
10. Cord Storage (not shown) Keeps countertop safe and neat
by conveniently storing excess cord.
11. Impact-Resistant Plastic Housing is crafted of the finest
quality materials to resist staining, cracking, and odours.
12. Innovative Cuisinart Design in combination with power,
performance, sturdiness, and easy cleanability, makes this
blender a winner.
USE AND CARE
ASSEMBLY
To use your Cuisinart®SmartPower®Electronic Blender, begin by
assembling the blender jar.
1. Turn the blender jar (a) upside down, and place it flat on
a sturdy surface.
2. Position the rubber gasket (b) on the round opening on the
bottom of the blender jar.
3. Turn the cutting assembly (c) upside down, and place the
blade end in the blender jar opening. Note: Blades are sharp.
Handle carefully.
4. Secure the rubber gasket and cutting assembly into position
by placing the smaller opening of the locking ring (d) on top of
the cutting assembly. Engage threads by twisting the locking
ring clockwise until tightened. Make sure locking ring is tightly
fastened to blender jar. Once assembled, turn the blender jar
right-side up.
5. Push the cover onto the top of the blender jar. Push the
measured pour lid into the cover..
6. Place the blender jar on the motor base so that the jar markings
are facing you and the handle is positioned to one side..
7. Plug in power cord. Your blender is now ready to be used.
HELPFUL REMINDERS
• Oncethecoverisinposition,additionalingredientscan
be added during blending: twist the measured pour lid
counterclockwise until the tabs in the pour lid align with the slots
in the cover; pull up pour lid, add ingredients, and replace the
measured pour lid.
• Covershouldalwaysbeinplacewhiletheunitison.
• Warning: Do not place blender jar on base while motor is
running.
• Donottwistlockingringfromblenderjarwhenremovingblender
jar from base. Simply lift blender jar from motor base.
• Boilingliquidorsolidfrozenfoods(withtheexceptionofice
cubes or ½-inch [1.3 cm] pieces of frozen fruit) should never be
placed in the blender jar.
• Donotplaceice,frozenfoodsorverycoldliquidsinablender
jar that has come directly from a hot dishwasher.
• Donotplaceveryhotliquidsorfoodsinablenderjarthathas
come directly from the freezer. Boiling liquids should cool for 5
minutes before being placed in blender jar.
• FollowCleaningandMaintenanceinstructionsonpage7,prior
to your first use.
OPERATION
1. Place the motor base of your Cuisinart®SmartPower®
Electronic Blender on a flat, sturdy surface. It is important
that the surface be clean and dry. Assemble the blender by
following the assembly instructions. Once the jar is assembled
and is in position on the motor base, plug the Cuisinart®
SmartPower™Electronic Blender into an electrical outlet.
2. Add all necessary ingredients to the blender jar, and replace
the cover. You may add more ingredients by lifting the
measured pour lid and dropping ingredients through the fill
area. Replace the measured pour lid after adding ingredients.
Do not place hands in blender jar with blender plugged in.
Note: Add liquid ingredients first, then follow with solid
ingredients. This will provide more consistent blending and
prevent unnecessary stress on the motor.
2.
1.
3.
5.
6.
7.
8.
9.
8a.
8b.
Note: Blades are sharp…
handle carefully.
(d)
(a)
(b)
(c)

7
6
Tip: Liquid ingredients can be measured in the measured pour
lid using the measurement marking. Solid ingredients can
be added by simply dropping them through the fill area into
the blender jar. Replace the measured pour lid after adding
ingredients.
3. To start blending:Press the On button. The red On LED light
will flash, indicating that the blender is turned on but no speed
has been selected.
4. Press the desired blending speed:Both the On indicator
light and the activated speed indicator light will glow. The
blender will now be functioning at the desired speed. It is
possible to switch speeds without pressing the Off button, by
simply pushing the next desired speed button.
5. To stop the blending process:Re-press the activated speed
button. The blending process will stop. The red ON indicator
light will continue to flash to let you know that the blender
is still ON and can be reactivated by pushing the desired
speed button. The blender can be completely deactivated
and stopped from any speed by pushing the OFF button. You
will need to press the ON button again to continue blending.
As an added safety feature the blending process can also be
stopped by pushing any two speed buttons simultaneously.
This procedure will turn the blender OFF. To reset the blender
press the OFF button then press the ON button.
6. To reset the blender:The unit has an advanced thermal
resettable fuse feature. If the event of an overload condition
the unit will shut down to protect the motor from overheating.
When this happens, to reset the unit, unplug the blender and
let it cool down for a minimum of 15 minutes. Then look to
reduce the contents and/or clear any jams, then restart as
noted in the operating directions.
7. Pulse mode:While the blender is turned ON, you can create
a burst of power for quick, efficient blending by activating the
Pulse function. To do so, first push the Pulse button, which will
cause the pulse indicator light to flash. Next, push and release
the desired speed button. Repeat as desired. You determine
the duration of each pulse. While pulsing, all indicator lights
(the On, the Pulse, and the desired speed) will glow. The Pulse
function can be used to break apart larger pieces of food or to
control the texture of food when chopping. The Pulse function
is also effective in starting the blending process when you do
not want contnuous power, or when processing items that do
not require an extended amount of blending.
8. To crush ice:The SmartPower™Electronic Blender motor
is strong enough to crush ice without liquid at any speed;
however, for your convenience, we have preset the best speed
for ice crushing. To give you greater control, the Ice Crush
function automatically operates as a Pulse function. To crush
ice, place ice cubes in the blender jar, and place the cover and
the measured pour lid on the blender jar. Press the On button.
Press the Ice Crush button in short pulses until ice is crushed
to desired consistency. See the Recipe Tips section on page 8
for details
9. To dislodge food:Use a rubber or plastic spatula to help
remove food lodged around the cutting assembly. DO NOT
USE SPATULA UNTIL YOU HAVE TURNED THE BLENDER
OFF. Replace the cover and measured pour lid and continue
blending, if necessary. Make sure spatula is not inside the
blender jar befor blending.
10. When finished blending: Press the Off button and unplug the
blender from the electrical outlet. Never remove the blender
jar from the motor base until the blender is off. Do not twist
locking ring from blender jar when removing jar from motor
base. Simply lift blender jar from motor base. Do not place
hands in blender jar with blender plugged in.
CLEANING AND MAINTENANCE
Always unplug your Cuisinart®SmartPower®Electronic Blender
from the electrical outlet before cleaning. The blender is made of
corrosion-resistant parts that are easy to clean. Before first use and
after every use, clean each part thoroughly. Periodically check all
parts before reassembly. If any part is damaged or blender jar is
chipped or cracked, DO NOT USE BLENDER.
Remove the blender jar from the motor base by lifting straight up
and away. Twist off the locking ring by turning counterclockwise.
Remove the cutting assembly and rubber gasket. Wash in warm
soapy water, rinse, and dry thoroughly.
Place the locking ring in the upper rack of the dishwasher or wash
in warm water.
CAUTION: Handle the cutting assembly carefully. It is SHARP and
may cause injury. Do not attempt to remove blades from cutting
assembly.
Remove the blender jar cover and the measured pour lid. Wash
in warm, soapy water; rinse and dry thoroughly, or place in upper
rack of dishwasher. The blender jar must be washed in warm
soapy water and rinsed and dried thoroughly. The blender jar can
also be placed upside down in dishwasher.
Finally, wipe the motor base clean with a damp cloth to remove
any residue, and dry thoroughly. Never submerge the motor base in
water or other liquid, or place in a dishwasher.
Tip: You may wish to clean your blender cutting assembly as
follows: Squirt a small amount of dishwashing liquid into
assembled blender jar and fill halfway with warm water. Run on Stir
for 15 seconds. Repeat, using clean tap water. Empty blender jar
and carefully disassemble parts. Wash cutting assembly, gasket
and locking ring in warm, soapy water. Rinse and dry all parts
thoroughly.
Any other servicing should be performed by an authorized
service representative.
To Activate Blender Press ON- The blender is in ON Mode.
To Begin Blending Press desired Speed Button.
To Change Speeds Press desired Speed Button.
To Pulse In ON mode press PULSE, then press and release
desired speed button as needed.
To Crush Ice In ON mode, press and release ICE CRUSH Button
as needed.
To Stop Blending
(and Deactivate Blender)
Press OFF Button.
To Stop Blending (in Pulse or ICE
CRUSH Mode)
Release button.
To Stop Blending in Stir, Chop, Mix,
Purée, or Liquefy Mode
Press Speed Button again. This will return the
blender to ON mode. Press OFF Button to turn
blender OFF.
QUICK REFERENCE GUIDE
SPEED SELECTION GUIDE
REFER TO THIS GUIDE TO CHOOSE THE BEST SPEED FOR YOUR DESIRED RESULT.
INgREDIENT/RECIpE SpEED RESULT
Reconstituting frozen
orange juice concentrate
Stir Smooth and full-bodied
Mayonnaise Stir Thick and creamy
Salad dressings Stir Desired consistency
Nuts Chop Coarse to fine
Whipping cream Mix Thick topping
Bread Crumbs Mix Uniformly fine
Health drinks Liquefy Smooth and creamy
Frozen cocktails Liquefy Thick and slushy
Grinding hard cheese Liquefy Coarse to fine
Spices Liquefy Coarse to fine
Zeste d’agrume râpé Purée Uniformly fine
Milk shakes Purée Smooth and creamy
Baby food Purée Smooth and creamy
Ice Ice Crush Snowy

9
8
DO’s and DON’Ts WHEN
USING YOUR BLENDER
Do:
• Makesuretheelectricaloutletisratedatthesamevoltageas
that stated on the bottom of the blender motor base.
• Alwaysusetheblenderonaclean,sturdyanddrysurface.
•Always add liquid ingredients to the blender jar first, then
add remaining ingredients. This will ensure that ingredients
are uniformly mixed.
• Cutmostfoodsintocubesapproximately½inch(1.3cm)to
1 inch (2.5 cm) to achieve a more uniform result. Cut all cheeses
into pieces no larger than ½ inch (1.3 cm).
• Usethemeasuredpourlidtomeasureliquidingredientssuch
as alcohol. Replace measured pour lid after ingredients have
been added.
• Usearubberorplasticspatulaasneeded,onlywhenthe
blender is turned off. Never use metal utensils, as damage may
occur to the blender jar or cutting assembly.
• Placecoveronfirmly.Alwaysoperatetheblenderwiththe
cover on.
• Makesurelockingringistightlyattachedtoblenderjar.
• Alwaysremovelockingring,cuttingassembly,andrubber
gasket before cleaning.
• Whenscrapingtheblenderjarwithaspatula,removethefood
from the sides of the blender jar and place food in the centre of
the blender jar, over the cutting assembly.
• Whenchoppingfreshherbs,garlic,onion,zest,breadcrumbs,
nuts, spices, etc., make sure the blender jar and cutting
assembly are completely dry.
• Iffoodtendstosticktothesidesoftheblenderjarwhen
blending, pulse in short bursts.
• Pulsesshouldbeshortbursts.Spacethepulsessotheblades
stop rotating between pulses.
Don’t:
• Don’tstorefoodorliquidsinyourblenderjar.
• Don’tplacecuttingassemblyandlockingringontomotorbase
without the blender jar attached.
• Blenderwillnotmashpotatoes,kneadheavydough,orbeat
egg whites.
• Don’tremoveblenderjarwhileunitison.Keeptheblenderjar
cover on the blender jar while blending.
• Don'ttwistlockingringfromblenderjarwhenremovingblender
jar from motor base. Simply lift blender jar from motor base.
• Don’toverprocessfoods.Blenderwillachievemostdesired
results in seconds, not minutes.
• Don’toverloadblender.Ifthemotorstalls,turntheblenderoff
immediately, unplug the unit, and remove a portion of the food,
then continue.
• Don’tuseanyutensilinsidetheblenderjarwhilethemotorison.
• Don’tuseanycontaineroraccessoriesnotrecommendedby
Cuisinart. Doing so may result in injury.
• Don’tplacehandsinsidetheblenderjarwhenblenderis
plugged in.
• Don’taddboilingliquidsorfrozenfoods(excepticecubesor
½-inch [1.3 cm] pieces of frozen fruit) to glass blender jar. Boiling
liquids should cool for 5 minutes before being placed in blender
jar.
RECIPE TIPS
The simple recipes that follow include some old Cuisinart®
favourites, as well as some creative combinations that are sure to
please your friends and family. Thanks to the superior ice crushing
power of the SmartPower®Electronic Blender, you’ll also be able
to make delicious frozen drinks.
• Chopping Nuts: Pulse ½ cup (125 ml) of nuts (shells removed)
on Chop 4 to 5 times. Turn blender off; scrape blender jar with
spatula. Turn blender on and pulse on Chop 2 to 3 times. Turn
blender off. Pulse fewer times for more coarsely chopped results.
For best results, process no more than 1 cup (250 ml) at a time.
• Bread, Cookie or Cracker Crumbs: For best results, use
day-old bread (drier bread works best). Break bread slices into
½-inch (1.3 cm) pieces, and process no more than 1 cup
(250 ml) of pieces at a time on Mix for 5 to 10 seconds. Crackers
and cookies should also be broken into ½-inch (1.3 cm) pieces;
process 1 cup (250 ml) at a time on Mix for 10 to 15 seconds.
Turn blender off.
• Crushing Ice: Add up to 10 large ice cubes to blender jar. Press
the Ice Crush button, using short bursts, 10 times, or until cubes
are the consistency of snow. Turn blender off. Pulse fewer times
if coarsely chopped ice is desired.
• Grating Citrus Zest: For best results, blender jar and cutting
assembly must be clean and dry. Remove zest from fruit in strips
(using vegetable peeler). Use no more than 8 strips at a time
(zest of one medium lemon). Cut strips in half. Add strips and
1 teaspoon (5 ml) sugar (from recipe) to the blender jar. Blend on
Liquefy for 15 to 20 seconds. Turn blender off.
• Baby Food: Combine ½ cup (125 ml) cooked vegetables, fruit or
meat with 3 tablespoons (45 ml) liquid (water, milk or fruit juice) in
the blender jar. Blend on Purée for 15 to 20 seconds. Add more
liquid if necessary and process again. Turn blender off.
• Grinding Hard Cheese: Cut cheese into ½-inch (1.3 cm) pieces.
Blend on Liquefy for 30 seconds. Turn blender off. For best
results, grind no more than 3 ounces (85 g) of cheese at a time.
• Grinding Spices: For best results, blender jar and cutting
assembly must be clean and dry. Add ¼ to ½ cup (50 ml to
125 ml) of spices/seeds/peppercorns to blender jar. Blend on
Liquefy for 30 to 35 seconds. Turn blender off.
• Whipping Cream: Whip 1 cup (250 ml) of cream (whipping or
heavy cream) at a time. Blend on Mix, and process for 45 to
60 seconds or until creamy and smooth. If making sweetened
cream, add sugar after 10 seconds. Turn blender off. Makes
about 1 cup (250 ml).
• Puréeing Sun-Dried Tomatoes: Rehydrate 1 ounce (30 g) of
tomatoes in 1 cup (250 ml) boiling water. Allow to sit for 10
minutes or until softened. Add tomatoes and water to blender
jar. Cover and pulse on Liquefy 5 times; then run continuously
on Liquefy for 15 to 20 seconds. Turn blender off. Drain in
fine strainer if desired. Makes about ½ cup (125 ml) of puréed
tomatoes.

23
22
WARRANTY
LIMITED THREE-YEAR
WARRANTY
We warrant that this Cuisinart product will be free of defects in materials or
workmanship under normal home use for 3 years from the date of original
purchase. This warranty covers manufacturer’s defects including mechanical
and electrical defects. It does not cover damage from consumer abuse,
unauthorized repairs or modications, theft, misuse, or damage due to
transportation or environmental conditions. Products with removed or altered
identication numbers will not be covered.
This warranty is not available to retailers or other commercial purchasers or
owners. If your Cuisinart product should prove to be defective within the
warranty period, we will repair it or replace it if necessary. For warranty
purposes, please register your product online at www.cuisinart.ca to
facilitate verication of the date of original purchase and keep your original
receipt for the duration of the limited warranty. This warranty excludes
damage caused by accident, misuse or abuse, including damage caused by
overheating, and it does not apply to scratches, stains, discolouration or
other damage to external or internal surfaces that does not impair the
functional utility of the product. This warranty also expressly excludes all
incidental or consequential damages.
Your Cuisinart product has been manufactured to the strictest specications
and has been designed for use only in 120 volt outlets and only with
authorized accessories and replacement parts. This warranty expressly
excludes any defects or damages caused by attempted use of this unit with
a converter, as well as use with accessories, replacement parts or repair
service other than those authorized by Cuisinart.
If the appliance should become defective within the warranty period, do not
return the appliance to the store. Please contact our Customer Service
Centre:
Toll-free phone number:
1-800-472-7606
Address:
Cuisinart Canada
100 Conair Parkway
Woodbridge, Ont. L4H 0L2
Email: [e-mail]
Model: SPB-7C
To facilitate the speed and accuracy of your return, please enclose:
• $10.00forshippingandhandlingoftheproduct(chequeormoneyorder)
• Returnaddressandphonenumber
• Descriptionoftheproductdefect
• Productdatecode*/copyoforiginalproofofpurchase
• Anyotherinformationpertinenttotheproduct’sreturn
* Product date code can be found on the underside of the base of the
product. The product date code is a 4 or 5 digit number. Example, 90630
would designate year, month & day (2009, June 30th).
Note: We recommend you use a traceable, insured delivery service for
added protection. Cuisinart will not be held responsible for in-transit damage
or for packages that are not delivered to us.
To order replacement parts or accessories, call our Customer Service Centre
at 1-800-472-7606. For more information, please visit our website at
www.cuisinart.ca
©2011 Cuisinart Canada
100 Conair Parkway,
Woodbridge, ON L4H 0L2
Consumer Call Centre E-mail:
[e-mail]
Printed in China
1-800-472-7606
11CC127092
Cuisinart offers an extensive assortment of top quality products to make life
in the kitchen easier than ever. Try some of our other countertop appliances
and cookware, and Savor the Good Life®.
www.cuisinart.ca
Coffeemakers Food
Processors
ToastersRice Cookers Cookware
Any trademarks or service marks of third parties used herein are the
trademarks or service marks of their respective owners. IB-9568B-CAN