Cuisinart GAS0656AF User manual

Stainless 6 Burner Gas Grill
Model GAS0656AF
ASSEMBLY INSTRUCTIONS

1
ASSEMBLY INSTRUCTIONS:
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLING OR OPERATING YOUR GRILL.
WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN ASSEMBLING THIS UNIT.
The following tools are required to assemble this Cuisinart 6 Burner Gas Grill:
• Phillips Screwdriver
• Pliers or Wrench
PARTS LIST:
1 Grill Body
6 Heat Tents
3 Cooking Grates
1 Warming Rack
1 Left Side Table
1 Right Side Table
1 Sear Burner Grate
1 Side Burner Grate
1
2
3
4
5
6
7
8
2 Knobs
2 Door Handles
1 Grease Tray Handle
1 AA Battery
1 Grease Cup
1 Sear Buner Grease Tray
1 Left Side Control Panel
1 Right Side Control Panel
1 Sear Burner Wind Guard
9
10
11
12
13
14
15
16
Note: Most hardware is pre-attached to the grill. You may need to loosen some screws
partially while others may need to be removed in order to assemble parts. The screws
that you remove will be re-used so don’t misplace this hardware.
Extra screws are included in a small bag with the owners manual.
17

2
14
16
12
11
8
5
9
6
3
2
1
7
10
13
15
4
17

3
Step 2
• Remove 2 screws form
GRILL BODY 1
• Remove screw from
LEFT SIDE TABLE 5
Step 1
1
5
Remove screw
Remove 2 screws

4
NOTE: Before tightening keyhole
screws, make sure panels are aligned.
Step 4
Step 3
• Attach LEFT SIDE
TABLE 5and RIGHT
SIDE TABLE 6using
keyholes
6
5
1
• Install screw through
rebox (Removed in
Step 1)

5
• Attach ELECTRODE
WIRE to IGNITOR
Step 6
IGNITOR
Step 5
• Remove 2 screws from
SIDE BURNER VALVE
• Insert SIDE BURNER
VALVE through holes in
RIGHT SIDE CONTROL
PANEL 16
• Tighten 2 screws on
RIGHT SIDE CONTROL
PANEL 16
• Attach RIGHT SIDE
CONTROL PANEL 16 to
RIGHT SIDE TABLE 6
using keyholes and screw
(Removed in Step 2)
make sure BURNER
VENTURI ts over
VALVE NOZZLE
RIGHT SIDE
CONTROL
PANEL 6
16
BURNER
VENTURI
VALVE
NOZZLE
ELECTRODE
WIRE

6
IGNITOR
BUTTON
Step 7a
Step 7b
IGNITOR
BLACK
ELECTRODE
WIRE
• Attach BLACK
ELECTRODE WIRE to
IGNITOR
• Attach IGNITOR WIRES
to back of IGNITOR
BUTTON
IGNITOR
WIRES (RED
& WHITE)

7
Step 9
Step 8
LEFT SIDE
CONTROL
PANEL
15
• Remove 2 screws from
SEAR BURNER VALVE
• Insert SEAR BURNER
VALVE through holes in
LEFT SIDE CONTROL
PANEL 15
• Tighten 2 screws on
LEFT SIDE CONTROL
PANEL 15
• Attach LEFT SIDE
CONTROL PANEL 15 to
RIGHT SIDE TABLE 5
using keyholes and screw
(Removed in Step 2)
make sure BURNER
VENTURI ts over
VALVE NOZZLE
BURNER
VENTURI
VALVE
NOZZLE
5
• Loosen 4 screws on
SEAR BURNER WIND
GUARD 17
• Install SEAR BURNER
WIND GUARD 17 using
keyholes
• Tighten 4 screws
17
Tighten 4 screws
Loosen 4 screws

8
• Remove 2 screws from
GREASE TRAY
• Attach GREASE TRAY
HANDLE 11 using 2
screws
Step 10
Step 11
4
3
11
• Install HEAT TENTS 2,
COOKING GRATES 3
and WARMING RACK 4
• Install SEAR BURNER
GRATE 7and SIDE
BURNER GRATE 8
• Install SEAR BURNER
and SIDE BURNER
KNOBS 9
2
78
99

• Install DOOR HANDLES
10 (Screws and inserts
are pre-attached to
handles)
Step 12
10 10
Step 13
• Install SEAR BURNER
GREASE TRAY 14 and
GREASE CUP 13
13
14