Cuisinart Precision Pro User manual

Precision Master®
Pro 6.5-Quart Digital Stand Mixer
QUICK REFERENCE GUIDE
PREPROGRAMMED FOOD-PREP SETTINGS
CONTROL DIAL MENUS
Introducing the digital stand mixer with the perfect blend of power, precision, and speed! Equipped with
a high-performance 600-watt motor, the Cuisinart®Precision Master®Pro Stand Mixer powers through
even the heaviest mixing jobs in a large-capacity 6.5-quart bowl. A turn of the digital LED dial is all it takes
to select from 12 speed options, including 3 preprogrammed food-prep settings and 7 recipe tasks to be
performed in the food-prep settings. Premium attachments include chef’s whisk, flat mixing paddle, dough
hook, and ingredient funnel for maximum versatility with minimal mess.
OPTIONS WITHIN RECIPE TASKS
RECIPE TASKS RECIPE TASKS RECIPE TASKS

IMPORTANT!
Do not discard. Read before operating your new Precision Master®
Pro 6.5-Quart Digital Stand Mixer. Keep for further reference.
These helpful hints are intended to be a supplement to the Instruction Booklet.
In order to ensure proper operation and optimum performance, please read the
entire Instruction Booklet.
1-800-726-0190
www.cuisinart.com
PG-39986A© 2023 Cuisinart
OPERATION
TO TURN STAND MIXER ON
1. Plug in the stand mixer.
2. To secure mixing bowl on base, turn right.
3. Rotate the dial to choose from the menu options on the previous page. All other times “Cuisinart”
will appear .
4. Select preset program by pressing the dial.
The DOUGH program can be used for yeasted breads and pizza doughs.
The MIXING program can be used to mix dry ingredients, and cream butters and sugars.
The WHISKING program can be used to whip heavy cream and mash potatoes.
NOTE: After 5 minutes of inactivity, the “Cuisinart” screen will appear and the digital dial will turn off.
To wake the unit, press or rotate the dial. The unit will go into Standby mode.
TO PAUSE A PROGRAM
While in a program, press the dial button once to PAUSE.
NOTE: The unit will PAUSE when the head is lifted up; however, user should use the dial button to
avoid splatter.
TO RESUME A PROGRAM FROM PAUSE
1. Make sure the head is in the down locked position.
2. Press and hold dial button for 2 seconds.
3. The unit will beep, and then it will continue in your selected program from the point it was stopped.
TO STOP A PROGRAM
1. Press and hold dial button until the unit beeps and the screen says STOP.
2. Release the dial button – mixer will still be in the selected program.
3. Press the dial button to get out of STOP to return to the Main Menu.
NOTE: There is a manual reset temperature protector to prevent overload; the unit will shut down
to protect the motor.
For more information, refer to pages 5-7 in the Instruction Booklet.