Curtis KCR2610 User manual

UNDERCOUNTER LCD TV CLOCK RADIO
MODEL NO. KCR2610
OWNER'S MANUAL
PLEASE READ BEFORE OPERATING THIS EQUIPMENT

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
ATTENTION
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
1

PREPARATION FOR USE
Unpacking and Setup
•
AC Operation
Unwind the AC cord and extend it to its full length. Insert the AC cord into any
convenient AC 120V~60Hz household outlet.
Carefully remove the unit from the display carton and remove all packing
material from the unit itself.
2

LOCATION OF CONTROLS
1. TIMER BUTTON
2.  MEM UP BUTTON
3.  MEM DN BUTTON
4.  TUNER/CLK BUTTON
5.  MOUNTING BRACKET
6.  FUNCTION BUTTON
7.  CH. UP BUTTON
8.  VOLUME BUTTON
9.  ENTER BUTTON
10. ITEM BUTTON
11. CH. DN BUTTON
12. EQ BUTTON
13. BAND BUTTON
14. SLEEP BUTTON
15. MEM/CLK SET BUTTON
16. POWER BUTTON
3
16
12
8
7
11
13
2
15
9
10
6
13
14
4
5

LOCATION OF CONTROLS
1. MEM. CH. UP/DN BUTTON
2.  FUNCTION BUTTON
3.  NUMBERDIAL BUTTONS
4.  DISPLAY BUTTON
5.  ITEM/ENTER BUTTON
6.  TIMER BUTTON
7.  MEM/CLK SET BUTTON
8.  TUNE/CH BUTTON
9.  MENU BUTTON
10. TFT ON/OFF BUTTON
11. BAND BUTTON
12. EQ BUTTON
13. VOLUME BUTTON
14. MUTE BUTTON
15. POWER BUTTON
4
1
2
3
4
5
6
789
10
11
12
13
14
15

POWER SOURCES
BATTERIES
NOTE:
The button cell battery contains mercury, don’t put in the trash. Recycle or
dispose as hazardous waste.
NOTE:
You may need to remove a protective covering from the remote’s battery
compartment before using the remote control.
5
(FOR REMOTE CONTROL)

OPERATING INSTRUCTIONS
1. SETTING THE TIME (POWER OFF MODE)
2. LISTENING TO THE RADIO
6
MEM/CLK SET MEM/CLK SET
MEM/CLK SET
MEM/CLK SET
TO ADJUST MINUTE
PRESS AND HOLD TO SCAN TO
THE NEXT AVAILABLE CHANNEL
SELECT AM/FM
SELECT RADIO
FUNCTION BAND
TUNING
TUNING TUNING
TUNING
PRESS AND HOLD TO SELECT 24 HR OR 12 HR

PROGRAM RADIO STATIONS
3. TELEVISION OPERATION
OPERATING INSTRUCTIONS
7
MEM/CLK SET
MEM/CLK SET
REPEATEDLY
PRESS AND HOLD
ENTER ENTER
TUNING
TUNING
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP

4. SET UP
OPERATING INSTRUCTIONS
8
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
ENTER ENTER
ENTER
ENTER
ENTER
ENTER
FULL
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
FULL
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
FULL
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
FULL
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT

OPERATING INSTRUCTIONS
9
HUE
DISPLAY MODE
RESET TO DEFAULT SETTING
EXIT PICTURE MENU
TUNING CHANNEL
CHOOSE 4:3
OR FULL
5
6
ENTER ENTER
ENTER
ENTERENTER
ENTER
ENTER
ENTER
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
DEFAULT
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
HUE
DISPLAY MODE
RESETING
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP

OPERATING INSTRUCTIONS
10
TV MODE (AIR/CABLE)
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
EXIT TUNING MENU
X 1
ENTER
ENTER ENTER
ENTER ENTER
ENTER ENTER
ENTER
ENTER
ENTER
ENTER
X 4
X 5
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
PLEASE INPUT 0 OR 1
PLEASE INPUT 0 OR 1
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
CABLE
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
CABLE
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
CABLE
PLEASE INPUT 0 OR 1
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
CABLE
PLEASE INPUT 0 OR 1
TUNING
CHANNEL
TV MODE
FINE TUNE
MANUAL TUNE
AUTO SCAN
CHANNEL SWAP
CABLE

5. LISTENING TO AN AUXILIARY SOURCE
6. SETTING KITCHEN TIMER
7. EQ
OPERATING INSTRUCTIONS
11
FROM VIDEO
OUTPUT
FROM LEFT
AUDIO OUTPUT
FROM RIGHT
AUDIO OUTPUT
TV, VCR, STEREO,
VIDEO GAME SYSTEM, ETC.
HOLD TIMER BUTTON
TO SHUT OFF TIMER
REPEATEDLY

*
*
*
Use a soft, clean cloth moistened with plain, luke-warm wafer to clean the
exterior of the unit.
Never use solvents such as benzene or other strong chemical cleaners since
these could damage the unit’s finish.
It is important that no liquid reaches the inside of the unit.
GENERAL
CARE AND MAINTENANCE
12

TROUBLESHOOTING GUIDE
13
PROBLEM SOLUTION POSSIBLE CAUSE
GENERAL
No sound is heard. Power is not on.
VOLUME Control is set
to minimum.
Mute is on.
Press the POWER button.
Adjust the VOLUME
Control.
Press Mute on remote.
RADIO
Station has not been
tuned properly.
FM reception is weak.
Wrong function is
selected.
Press the FUNCTION
button to the radio
position.
No sound is heard. Tune station properly.
Extend the FM cord.
TV
Snowy picture; noisy
sound.
Dotted lines or stripes.
Double images or
“ghosts”.
Good picture; no sound.
Good picture; noisy
sound.
A highly directional
antenna may improve the
picture.
This may be caused by
reflections from nearby
mountains or buildings.
Adjust the volume.VOLUME control is set
to minimum.
This may be caused by
reflections from nearby
mountains or buildings.
A highly directional
antenna may improve the
picture.
Adjust the antenna for
minimum interference or
connect an optional
external antenna.
This may be caused by
local interference
(e.g. Cars, neon signs,
hair dryers, etc.)
Align the antenna or
connect an external
antenna.
Station has not been
tuned properly.
Good picture; no sound.
No picture Power is not on. Set the FUNCTION Switch
to the TV position.
This may be caused by
reflections from nearby
mountains or buildings.
A highly directional
antenna may improve the
picture.