CyberData 011288 Manual

Quick Reference 930831D © 2023, CyberData Corporation, ALL RIGHTS RESERVED© 2023, CyberData Corporation, ALL RIGHTS RESERVED 930831D Quick Reference
Parts List • (1) Auxiliary RGB Strobe Kit
• (1) 3.28 feet [1 meter] cable
Getting Started • Download the Operations Guide PDF file, from the Downloads tab at:
http://www.cyberdata.net/voip/011288/
Features • Meets ADA requirements for telephony signaling and notification
• Activates from a CyberData IP endpoint
• Mailbox Message Waiting Indication
• Multicast activation
Specifications
Contacting CyberData
Specifications
Power Input Supplied by the supported CyberData VoIP endpoint
Flash rate 4 scenes available
Operating Temperature -10° C to 50° C (14° F to 122° F)
Dimensions 4.5 inches [115 mm] Length
2.1 inches [55 mm] Width
4.5 inches [115 mm] Height
Weight
Boxed Weight
1.0 lbs. (0.45 kg)
2.0 lbs. (0.90 kg)
Part Number 011288
Sales: 831-373-2601 ext. 334
Support: 831-373-2601 ext. 333
Support Website: https://support.cyberdata.net/
RMA Department Contact and Status: https://support.cyberdata.net/
Warranty Information: https://support.cyberdata.net/
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: [phone]
Fax: [phone]
https://www.cyberdata.net/
Intercom Connections
Speaker Connections
J1
JX
Intercom Board
Auxiliary RGB (Multi-Color) Strobe Kit
Auxiliary Strobe Cable to SIP Speaker Installation:
1. Connect the one meter strobe cable to the adapter cable.
2. Remove the mounting screws and port cover from the SIP Speaker.
3. Align the key bump on the adapter cable to the key bump slot on the SIP Speaker.
4. Replace the port cover and mounting screw.
Key Bump
Key Bump
Slot
Port Cover
Mounting Screw
Cable
Adapter
Strobe Cable
RGB Strobe Assembly
to
Backplate
Cable Exit
SIP Speaker Assembly
to Install the Adapter Cable
Remove Port Cover
J1
J1
The IP Endpoint Company
Installation Quick Reference
Auxiliary RGB (Multi-Color)
Strobe Kit
011288

© 2023, CyberData Corporation, ALL RIGHTS RESERVED 930831D Quick Reference Quick Reference 930831D © 2023, CyberData Corporation, ALL RIGHTS RESERVED
Paging Amplifier Connections
Strobe Connections Behind the Port Cover
Use Either Slot
Remove Coverplate
and Screw
(Part of the RGB Strobe)
Strobe Cable Kit
J1
to JX
Backplate
Auxiliary RGB Strobe Kit
011288
SIP Paging Amplier
011324
Mounting Screw
*Note: The optional 011490 Outdoor Auxiliary RGB (Multi-Color) Strobe Kit can also be connected.
JX-5 JX-4 JX-3 JX-2 JX-1
Strobe Connections
J6-3 J6-2 J6-1
24 VDC Auxiliary Power
Connections
See the Operations Guide for the Paging Amplifier for the descriptions of the connections behind the port cover.
Mounting Option
Mounting Option
Backplate
Faceplate
Mounting Screw (3x)
Screw Accessory Kit
Self-Tapping Screws & Anchors Pre-Drill Holes
& Wall Cutout
Strobe Cable
Assembly
from Paging Amplier
to J1
= Cable Slot Open
= Cable Slot Close
Screw Accessory Kit
Self-Tapping Screws & Anchors
Backplate
Pre-Drill Holes
Strobe Cable
Mounting Screw (3x)
Faceplate
Assembly
for Anchors
from Paging Amplier
= Cable Slot Open
= Cable Slot Close
to J1
Slot