CyberData 11098 Manual

Installation Quick Reference
VoIP V2 Ceiling Speaker
SiP Compliant
011098*, RAL 9002, Gray White, Standard
011099, RAL 9003, Signal White, Optional
*Replaces 011021
Quick Reference 930273I © 2010, CyberData Corporation, ALL RIGHTS RESERVED© 2010, CyberData Corporation, ALL RIGHTS RESERVED 930273I Quick Reference
Typical System Installation
Getting Started
• Download the VoIP V2 Ceiling Speaker Operations Guide PDF file from the V2 Speaker Documentation page at:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2/docs.html
• Create a plan for the locations of your speakers.
• Prior to installation, consult local building and electrical code requirements.
Parts
Parameter Factory Default Setting
IP Addressing DHCP
IP Addressa
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Maska255.0.0.0
Default Gatewaya10.0.0.1
802.3af Compliant Ethernet Switch
Clock Kit IP Phone IP PBX Server
12 3 4 56
Speaker Speaker
*More installation options are illustrated in the
VoIP V2 Ceiling Speaker Operations Guide.
(1) Template for Speaker
and Screw Holes*
(1) Speaker Assembly (1) Drop Ceiling Mounting Kit
(3) #8 Nylon Thumb Nuts
(3) #8 Fender Washers
(3) 8-32 x 1 1/4” Mounting
Screws
(1) Drywall Mounting Kit
(3) Plastic Ribbed Anchors
(3) #8 Sheet Metal Screws
* See the last page
of this document

© 2010, CyberData Corporation, ALL RIGHTS RESERVED 930273I Quick Reference Quick Reference 930273I © 2010, CyberData Corporation, ALL RIGHTS RESERVED
Mounting
Contacting CyberData
*Ceiling Tile or Dry Wall
VoIP V2 Speaker
Assembly
#8 Fender Washer (3x)
#8 Nylon Thumb Nut (3x)
#6 Screw (3x)
Dry Wall Mounting Kit
Template
Plastic Ribberd Anchor (3x)
Dry Wall Mounting Kit
#8-32x1 1/4" (3X)
Ceiling Mounting Screw
*Optional Reinforcement Mount
P/N: 010991A (Sold Seperately)
Tools Required for Installation:
• (1) Sheetrock saw or
(1) Drywall cutter
• (1) #2 Phillips Screwdriver or
(1) #2 Phillips Screwdriver Hex Bit
To mount a speaker:
1. Use the TEMPLATE on the back of this
document to cut a hole in the wall or
ceiling, and prepare holes for the screws.
2. Plug the Ethernet cable into the speaker
assembly. The yellow light verifies the
network connection.
3. For drop ceiling mounting, position the
IP SPEAKER ASSEMBLY in the ceiling
so that its screw holes align with those
you prepared.
4. For drywall mounting, place the three
PLASTIC RIBBED ANCHORS in the
holes you prepared, and position the IP
SPEAKER ASSEMBLY over them,
aligning the screw holes in the assembly
with the anchors.
5. For drop ceiling mounting*, use the three
8-32 x 1 1/4" MOUNTING SCREWS, #8
NYLON THUMB NUTS, and #8
FENDER WASHERS to secure the
speaker.
For drywall mounting, use the three #8
SHEET METAL SCREWS to secure the
speaker.
* For weak ceiling tile, CyberData offers a
reinforcing mount (CyberData part
number 010991A).
Sales: [phone] ext. 334
Support: 831-373-2601 ext. 333
Web: http://www.cyberdata.net/support/contactsupportvoip.html
RMA Dept: [phone] ext. 136
Email: [e-mail]
RMA Status: http://www.cyberdata.net/support/rmastatus.html
Warranty information is available at:
Web: http://www.cyberdata.net/support/warranty/index.html
Corporate Headquarters
CyberData Corporation
2555 Garden Road
Monterey, CA 93940, USA
Phone: [phone]
Fax: [phone]
www.CyberData.net
Dimensions and Connections
Connecting Power
Features
9.0 [229]
3.0 [75]
Dimensions are in Inches [Millimeter]
AUX SPEAKER (-)
AUX SPEAKER (+)
BTN SENSE GND
LINE OUT (-)
LINE OUT (+)
BUTTON LED (-)
BTN SENSE
BUTTON LED (+)
RELAY NO
RELAY COM
AUX POWER (-)
AUX POWER (+)
(+12VDC @ 1A)
J10 J9
PoE Injector (Part #010867A)
Non PoE Switch
RTFM Switch
To broadcast a device’s current IP address, press and release
the RTFM switch within a five second window.
To restore a device’s factory default settings, press and hold
the RTFM switch for more than five seconds.
Speaker Volume
Network Link/Activity LED (yellow)
Speaker Status LED (green)
A solid light confirms that the speaker is operational.