Quick Reference 932029B © 2023, CyberData Corporation, ALL RIGHTS RESERVED© 2023, CyberData Corporation, ALL RIGHTS RESERVED 932029B Quick Reference
Dimensions
Tap Settings and Voltage Selection
Dimensions are in Inches [Millimeters]
9.93 [252.2]
5.74 [145.7]
8.66 [220]
Power Tap Settings
Voltage 1.25W 3.75W 10W 30W
25V 88.6 93.1 96.8 100.7
70V 89.3 93.7 97.4 101.9
Tap Settings Voltage Selection
To access the Voltage Selection switch and the Tap
Settings, remove the magnetically attached speaker grill.
Analog Ceiling Speaker db Output Levels*
* dBC @ 1M and 1kHz
Features
• Supports 25V, 70V or traditional 8 Ohm power input
• Multiple power tap settings for desired dB output
• Designed for good speech intelligibility
• Suitable for background music
• High efficiency speaker driver
• Easy installation
• Seismic tether bracket for additional stability
Getting Started
• This product ships in 70V mode with the power tap setting value of 1 (1.25W) selected.
• Create a plan for the locations of your speakers.
• WARNING: Do not use the 8 Ohm setting in a constant voltage application.
• WARNING: This product must be set to the appropriate voltage depending on the settings of the amplifier. Using a speaker set
to 25V in a 70V system will cause damage.
• WARNING: This enclosure is not rated for any AC voltages!
Parts
Contacting CyberData
(1) Template for Speaker*(1) Speaker Assembly
* See the last page of this document
Sales: 831-373-2601 ext. 334
Support: 831-373-2601 ext. 333
Support Website: https://support.cyberdata.net/
RMA Department Contact and Status: https://support.cyberdata.net/
Warranty Information: https://support.cyberdata.net/
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
https://www.cyberdata.net/
Installation Quick Reference
Analog Ceiling Speaker
25V/70V/8 Ohm
011588
