CyberPower CP CP-H720P CP-H720P User manual

This USB Hub makes the most of your computer and workspace by increasing the
number of available USB ports. There has never been a more convenient way to
expand your USB capacity.
Quick Start Guide
for USB 2.0 7-Port Hub
Model No. CP-H720P

Thank you for purchasing a product. To enjoy all the features and benefits
of this USB Hub, please read and follow all installation and operation instructions
completely.

Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ProductOverview ............................4
Installation..................................6
AppendixA..................................7
Troubleshooting
Appendix B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Radio Interference Statement
Appendix C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Lifetime Limited Warranty

Introduction
1
USB (Universal Serial Bus) is currently the standard for most
computers, notebooks and peripherals. The USB connections
allow the user to easily connect multiple devices. The
USB 2.0 7-Port Hub provides additional ports to connect up to 7
USB devices to a single USB port on your computer.
An AC power adapter is included for you to use the self-power
mode.
The Quick Start Guide contains easy instructions in order to
show you how to set up and start using your USB
Hub.

Any PC or Macintosh computer with an available USB port and USB-
compliant operating system (Windows 2000, ME, XP, Vista and 7 or
Mac OS 8.6 and above, etc)
System Requirements
2
Package Contents
This package includes:
USB 2.0 7 Port Hub (Model CP-H720P)
AC Power Adapter
5 A-miniB USB Cable
User Manual

Specifications
3

Product Overview
Model CP-H720P
4
1
22
3
4
5

Product Overview - continued
5
1) Power Indicator - Blue LED will light when USB Hub is receiving power.
2) Downstream Ports - Connect your USB devices to these ports. (Includes
1 Flash Drive Port)
3) Port Status Indicators - Green LEDs indicate port status and over
current detection. When a device is connected to one of the ports, all
Green LEDs will illuminate. If an over current condition occurs, the LED
for that port will turn off, indicating a problem with that device.
4) Root (Upstream) Port
Connect your computer to this port to provide a link between the hub and
devices.
5) AC Adapter Power Connection
Connect your AC power adapter here. This hub operates in self-power
mode to ensure sufficient power is provided to connected USB devices.

Installation
6
This USB Hub is a plug and play device. Your computer will display the Add New
Hardware Wizard after connecting the hub to your computer. Installation may be
done whether your computer is powered on or off. It is not necessary to restart
your computer after installation.
1) Connect the A-B cable (included in this package) to the Upstream port on the
USB Hub, then connect the other end of the cable to an unused USB port on
your computer.
2) Connect your USB devices to the Downstream ports on the USB Hub.
Self-Powering the Hub:
If additional power is required for connected USB devices, plug the DC power
adapter into the power jack, then plug the power adapter into a wall outlet.
Note:
Please use this USB Hub under Self-Power Mode.

Appendix A
Troubleshooting
7
Problem Possible Cause A
Problem Possible Cause Action
Unit operates
Erratically.
Static electricity may
cause the hub to
behave erratically.
Reset the hub and
disconnecting it from
your computer. Wait 5
seconds, then
reconnect it.
USB devices
operate erratically or
can't be powered
Connected USB
devices may require
too much power for
bus-powered
Connect the AC power
adapter to the hub.
Unit fails to operate
at all.
Non-USB compliant
operating system.
Insure that your
computer is fully USB-
compatible and a USB-
compliant operating
system is installed.
(see System
Requirements section)
AC power adapter by
on.
operation.

Radio & TV Interference Statement
This equipment has been tested and found to comply within the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequence energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. There
is no guarantee, however, that interference will not occur in a particular
installation.
Appendix B
8

Appendix C
Lifetime Limited Warranty
CyberPower warrants this USB Hub (the Hub) to be free from defect in material or manufacture for its
lifetime. If a defect results in product failure during its normal use, CyberPower's sole responsibility is to
repair or replace (at its sole option) the Hub.
The foregoing Limited Warranty is the consumer's sole and exclusive remedy and excludes any incidental
or consequential damages. Some States do not allow the exclusion or limitation of incidental and
consequential damages, so certain of the above limitations or exclusions may not apply to you (the
Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may have
other rights, which vary from State to State.
To make a Limited Warranty claim:
1. Pack and ship the Hub with a dated Proof-of-Purchase receipt to CyberPower at
4241 12th Ave E, Suite 400, Shakopee, MN 55379;
2. Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;
3. Clearly include your name and address (a) on the outside packaging and (b) on a sheet of paper
enclosed in the box with the Hub that is being returned; and
4. You MUST prepay all shipping costs and you are responsible for packaging and shipment.
9

Appendix C - continued
CyberPower will inspect and examine the Hub. If the Hub is defective in material or workmanship,
CyberPower will repair or replace it and return it to you at CyberPower's expense at the place you have
indicated.
Contact Information:
CyberPower, 4241 12th Ave E, Suite 400, Shakopee, MN 55379, [phone] (toll free). CyberPower
is the warrantor under this Limited Warranty. You may also visit CyberPower on the Internet at
www.CPSww.com
10

CyberPower Systems (USA), Inc.
4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.
TEL: [phone] FAX: [phone] Toll-Free: [phone]
E-mail: [email protected] Web: www.CPSww.com
Entire contents copyright 2008 CyberPower Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.
©
K01-H720P00-03