Cyberview Er2 series User manual

User Manual

2U Dual Slide LCD Keyboard Drawer

15", 17"DQG 19" 6creen 6izeV

ER2 Series

- 2SWLRQDOKVM



ER2S Shallow Series

- 6KDOORZ'HSWK2SWLRQDO.90

ERS (2U) Series

- 'HVLJQHGWRZRUNZLWK6XQ

- 2U 17"RU 19" 6creen

- 2SWLRQDO.90

Chapter 1 Getting Started

1.1 Important Safeguards..........................................................1

1.2 Regulatory Notice................................................................2

1.3 Package Contents...............................................................3

1.4 Before Installation...............................................................4

1.5 Unpacking...........................................................................4

1.6 OptionalAccessories...........................................................4

1.7 Peripheral Products.............................................................5

1.8 Structure Diagram...............................................................5

1.9 How to Install “One Man” Installation Slides....................6-7

1.10 How to Use The Slides.......................................................8

1.11 How to Use The Dual Slide.................................................9

1.12(568 Series (Single console)

- Use CB-6 to connect to server via USB interface........................10

1.13(568 Series (Single console)

- Use CB-6 to connect to KVM via USB interface..........................10

1.14(5 Series (Single console)

- Use CE-6 to connect to server via PS/2 interface........................11

1.15(5 Series (Single console)

- Use CE-6 to connect to KVM via PS/2 interface..........................11

1.16(5 Series (Single console)

- Use CE-6 to connect to server via USB interface........................12

1.17(5 Series (Single console)

- Use CE-6 to connect to KVM via USB interface..........................12

Chapter 2 Operation

2.1 On-6creen Display Operation............................................13

2.2 On-6creen Menu...............................................................14

Chapter 3 Standard Speciﬁcation

3.1 Speciﬁcations..................................................................15

3.2 Keyboard & Mouse.......................................................16-17

3.3 How to Use (56 keyboard...............................................18

Contents

Chapter 4 Optional Speciﬁcation

4.1 KVM Options.....................................................................19

4.2 DVI-D Input Option............................................................19

4.3 BNC + S-Video Option.......................................................19

4.4 Audio Option.....................................................................20

4.5 DC 3ower Options............................................................21

4.6 Touchscreen Options........................................................21

Chapter 5 Troubleshooting..........................................................22

Chapter 6 Dimensions......................................................................23

1.1 Important Safeguards Chapter 1

P. 1

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modiﬁed or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, ﬁre, water, lightning, or other acts of nature, unauthorized product modiﬁ-

cation, or failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power ﬂuctuation or failure.

□Use of supplies or parts not meeting our speciﬁcations.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

P. 2

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is

given to the correctness of the contents. The information in this document is subject to change without no-

tice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned envi-

ronment with temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and

causing damage to other equipment or injury to persons nearby.

■When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it

and the power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage

and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be

higher than the one listed on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent

being damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to

the power supply or on other hardware may cause damage, ﬁre or electrical shock.

■Only qualiﬁed service personnel should open the chassis. Opening it yourself could damage the equip

ment and invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁed service

personnel.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

Any changes or modiﬁcations made to this equipment may void the user’s authority to operate this equip-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow-

ing measures:

■Reposition or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

1.2 Regulatory Notice Chapter 1

1.3 Package Contents Chapter 1

P.3

LCD keyboard drawer x 1 pc

CB-6 USB 2-in-1 KVM cable x 1 pc (for “S” series) or

CE-6 Combo 4-in-1 KVM cable x 1 pc (for RKP series)

User manual (As of Sept 2011, all user manuals will be download-only. Physical copies are available upon request)

Power cord x 1 pc

Auto switch power adapter ( for external power version) x 1 pc

Mounting bracket x 2 pcs

M6*15mm screw x 8 pcs

M6 cage nut x 6 pcs

Cup washer x 8 pcs

User

Manual

1 6

■It is very important to locate the LCD Keyboard Drawer in a suitable environment.

■The surface for placing and ﬁxing the LCD Keyboard Drawer should be stable and level or mounted into a suitable

cabinet.

■Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,

water, moisture and vibration.

■Position LCD keyboard drawer with respect to related facilities.

The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they

are included and in good condition. If anything is missing, or damage, contact the supplier immediately.

1.5 Unpacking

1.4 Before Installation Chapter 1

P. 4

1.6 Optional Accessories

1. Combo 4-in-1 KVM cable

1.1 &$(CE-6 6 feet

1.2 &$(CE-1010 feet

1.3 &$(CE-1515 feet

2. USB 2-in-1 KVM cable

2.1 &$8CB-6 6 feet

2.2 &$8CB-1010 feet

2.3 &$8CB-1515 feet

3. Power Cord

3.1 IEC power cord

3.2 NEMA 5-15 power cord (US)

3.3 BS 1363 power cord (UK)

3.4 CEE 7/4 power cord (German)

3.5 AS 3112 power cord (Australia)

Please Note:

■&$8&%FDEOHVSHUWDLQWR(56VHULHVRQO\

P. 5

1.7 Peripheral Products Chapter 1

1.8 Structure Diagram

For 15"LCD

Item Model No. Description

Matrix Cat 6 KVM

&DW0;0;0;

&DW0;,30;,30;,3

&DW0;0;0;

&DW0;,30;,30;,3

Matrix Cat6 163ort KVM

Matrix IP Cat6 163ort KVM

Matrix Cat6 323ort KVM

Matrix IP Cat6 323ort KVM

Matrix DB-15 KVM

0;0;0;

0;,30;,30;,3

0;0;0;

0;,30;,30;,3

Matrix DB-15 83ort KVM

Matrix IP DB-15 83ort KVM

Matrix DB-15 163ort KVM

Matrix IP DB-15 163ort KVM

Combo Cat 6 KVM

&DW&DW;&DW,3

&DW&DW;&DW,3

&DW&DW;&DW,3

Combo Cat6 83ort KVM

Combo Cat6 163ort KVM

Combo Cat6 323ort KVM

Combo DB-15 KVM 86%;,3

86%;,3

Combo DB-15 83ort KVM

Combo DB-15 163ort KVM

PS/2 DB-15 KVM  4 / 8 / 163ort PS/2 DB-15 KVM

Please Note:

■ER2S KVM models do not feature a membrane switch (and are controlled solely through hotkeys)

LCD interchangeable module kit

LCD membrane

“One Man” Installation Slides

Membrane switch (KVM option)

Keyboard interchangeable module kit

Mouse interchangeable module kit

Carry handle to release the 2-pt lock

P. 6

1.9 How to Install "One Man" Installation Slides Chapter 1

Installing into rack

■Attach the left and right mounting bracket to rack 19”

mounting rails.

■Adjust the rear mouting bracket to ﬁt your rack.

■M6 screw and cup washer x 6 pcs included.

Caution : Leaving the screws slightly loose, until

you complete the installation in step

■Pick up the LCD keyboard drawer.

■Insert the LCD keyboard drawer into the mounting bracket.

■Pull and hold the left & right black arrow buttons on the rails.

■Return the LCD keyboard drawer to park position.

Left front

Right front

Mounting bracket

Black arrow button

Left bracket

Right bracket

Front side

Rear side

P. 7

1.9 How to Install "One Man" Installation Slides Chapter 1

Please Note:

■NBK-01 pertains only to ER2-15 / 17 / 19 & ERS (2U) models

■NBK-02 pertains only to ER2S-15 / 17 / 19 models

■Installation procedures of NBK-02 are same to that of NBK-01.

■Tighten all 8 pcs of M6 screw to complete the installation.

■Attach front left and right mounting ears of the LCD

keyboard drawer to vertical mounting rails.

■M6 screw and cup washer x 2 pcs included.

Complete the installation

P. 8

1.10 How to Use the Slides Chapter 1

■Push the keyboard drawer into the rack.

(shown in Figure 3).

Figure 3.

Figure 2.

■Pull and hold the black arrow button on either

side of the LCD keyboard drawer to unlock.

(shown in Figure 2).

Figure 1.

■A black arrow release button is located on the

outside of each slide in the keyboard drawer.

(shown in Figure 1).

Caution : Keep your ﬁngers away from the

slide stop

For keyboard drawer only

1.11 How to Use the Dual Slide Chapter 1

P. 9

■Flip up the LCD to a suitable angle shown in

Figure 6.

Figure 6. Raise the LCD to a suitable angle.

Figure 5. Pull the handle toward the front of the LCD drawer.

■Push the handle toward the front of the upper

LCD drawer (shown in Figure 5).

■Gently pull the handle toward the front of the

lower keyboard drawer (shown in Figure 4) .

Figure 4. Slide the handle toward the front of keyboard drawer.

Figure 7. Operating the LCD keyboard drawer.

■Operate the LCD keyboard drawer shown in Figure 7.

P.10

Please Note:

■The above diagrams pertain only to the single console LCD keyboard drawer

■For integrated KVM LCD keyboard drawers, please refer to the "All KVM" user manual

Caution : The LCD keyboard drawer is hot-pluggable, but components of connected de-

vices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and un-

plugging cables while servers and KVM are powered on may cause irreversible damage to

the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the

LCD keyboard drawer, we suggest turning off the power to all devices before connecting

them. Apply power to connected devices again only after the LCD keyboard is receiving

power. The supplier is not responsible for damage caused in this way.

1.12 ERS (2U) Series (Single console) Chapter 1

- Use CB-6 to connect to server via USB interface

Figure 8. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface

1.13 ERS (2U) Series (Single console)

- Use CB-6 to connect to KVM via USB interface

Figure 9. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface

CB-6 KVM Cable

KVM

P. 11

Please Note:

■ER2/ERS (2U) Series use internal power via C13 (ER2S contains an external power brick)