CyberView S220 User manual

User Manual
S220 2U LCD Keyboard Drawer
- With KVM options
- 20" screen size
- Ultra high resolution 1600 x 1200
- Designed for SUN Solaris

Chapter 1 Getting Started
1.1 Important Safeguards..........................................................1
1.2 Regulatory Notice................................................................2
1.3 Package Contents...............................................................3
1.4 Before Installation...............................................................4
1.5 Unpacking...........................................................................4
1.6 OptionalAccessories...........................................................4
1.7 Peripheral Products.............................................................5
1.8 Structure Diagram...............................................................5
1.9 Installation...........................................................................6
1.10 Connect to Server via USB Interface..................................7
1.11 Connect to KVM via USB Interface.....................................7
Chapter 2 Operation
2.1 On-screen Display Operation..............................................8
2.2 On-screenMenu.............................................................9-10
Chapter 3 Standard Specification
3.1 Specifications....................................................................11
3.2 Keyboard & Mouse...........................................................12
3.3 How to Use “S” Keyboard.................................................13
Chapter 4 Optional Specification
4.1 KVM Options.....................................................................14
4.2 DVI-D Input Option............................................................14
4.3 S-Video + RCA Input Option..............................................14
4.4 S-Video + BNC Input Option.............................................15
4.5 DC power Options.............................................................15
Chapter 5 Troubleshooting...........................................................16
Chapter 6 Dimensions.......................................................................17
Contents

1.1 Important Safeguards Chapter 1
P. 1
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modifi-
cation, or failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.

P. 2
1.2 Regulatory Notice Chapter 1
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned enviro-
nment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and
the power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equip-
ment and invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equip-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

1.3 Package Contents Chapter 1
P. 3
LCD keyboard drawer x 1 pc
Fasteners for rear L-bracket x 4 pcs
330mm rear mounting L-bracket x 1 pair
* mounting depth-adjustable from 310 to 880mm
CB-6 2-in-1 USB KVM cable x 1 pc
User manual x 1 pc
Power cord x 1 pc
Auto switch power adapter (for external power version) x 1pc
5
4
2
6
1
3
7
User
Manual
1
6
5
4
32
7

1.6 Optional Accessories
■It is very important to locate the LCD Keyboard Drawer in a suitable environment.
■The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted
into a suitable cabinet.
■Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■Position LCD Keyboard Drawer with respect to related facilities.
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they
are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.5 Unpacking
1.4 Before Installation Chapter 1
P. 4
1. USB 2-in-1 KVM cable
1.1 CB-6 6 feet
1.2 CB-10 10 feet
1.3 CB-15 15 feet
2. Extended rear mounting L-bracket
2.1 430mm (16.9") extended rear L-bracket up to 980mm
*Extended rear L-bracket in tailor-made length on request
3. Power Cord
3.1 IEC power cord
3.2 NEMA 5-15 power cord (US)
3.3 BS 1363 power cord (UK)
3.4 CEE 7/4 power cord (German)
3.5 AS 3112 power cord (Australia)

P. 5
1.7 Peripheral Products Chapter 1
1.8 Structure Diagram
Item Model No. Description
DB-15 KVM CV-S801 / CV-S1601 8 / 16-port USB KVM
Cat5 KVM
UIP-1602 / UIP-3202
U-1602 / U-3202
U-1601 / U-3201
16 / 32-port IP Cat5 KVM
16 / 32-port two console Cat5 KVM
16 / 32-port high density Cat5 KVM
SAMSUNG Class A TFT LCD panel
Adjustable rear mounting L-bracket
Membrane switch (KVM option)
1
1
2
2
3
3
4
4
5
5
6
6
LCD membrane
Micro-switch for LCD auto ON /OFF
SUN-compatible keyboard incorporates SUN keys

P. 6
1.9 Installation Chapter 1
■Install each rear L-bracket using two fasteners shown
in Figure 1.
■Leaving the fasteners slightly loose.
Figure 1. Installing the rear L-bracket to the LCD keyboard drawer.
■Measure the front and rear mounting depth of the
rack.
■Align each rear L-bracket to a suitable length and
tighten the fasteners shown in Figure 2.
Figure 2. Aligning the rear L-brackets to a suitable length for the rack.
■Fixed the LCD keyboard drawer into the rack.
* Hardware (screws and cage nuts) for fixing the
mounting bracket to the rack is not provided.
Figure 3. Fixing the LCD keyboard drawer into the rack.

P. 7
Remarks
■The above connection is only for the LCD keyboard without KVM switch built-in.
■For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
1.10 Connect to Server via USB Interface Chapter 1
1.11 Connect to KVM via USB Interface
Figure 4. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface
Figure 5. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface

2.1 On-screen Display Operation Chapter 2
P. 8
LCD membrane
Exit the OSD screen
Shortcut key to auto adjustment by pressing the button for 5 seconds or
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function