CyberView RKP220 User manual

Toll Free : 1-888-865-6888
Tel : [phone] Fax : [phone]
Email : [email protected]

User
Manual
2U Rackmount LCD Keyboard Drawer
RKP220 Series
20” LCD
Optional KVM
․8, 16 Ports PS/2 KVM, single console

RKP220 User Manual
Rev. : 2.0 P.1
1. Table of Content P.1
2. Introduction P.2
3. Features P.2
4. Package Contents P.3
5. Optional Accessories P.4
6. Peripheral Products P.4
7. Important Safeguards P.5
8. Structure Diagram P.6
9. Dimension Diagram P.7
10. LCD OSD Menu Operation
LCD Membrane Diagram P.9
Main Menu P.9
Sub Menu P.10-13
Resolution Settings
For Windows P.14
For SUN Servers P.15
11. KVM Session
Front View P.17
Rear View P.18
Installation Steps P.19
Cascading P.20
12. Start Up
Hot Key Command P.21
Hot Key Command Operation P.22-23
KVM On Screen Display Control
OSD Structure Diagram P.24
OSD Menu Operation P.25
13. FAQ P.26
14. Technical Specification P.27-28
1. Table of Content

RKP220 User Manual
Rev. : 1.0 P.2
RKP Series is a combination of keyboard, mouse and monitor into a drawer,
with features such as flip-up design, adjustable brackets, built in LCD OSD to
provide effective assistant for an administrator to control PC system.
RKP Series provides cost effective for your limited IT budget over using CRT
and rack mounting. Also, it will be space saving for your compact environment
rack and effective assistant for an administrator to control PC system.
2. Introduction
3. Features
● Unique monitor flip up design allows viewing through closed glass door of
cabinet
● Ultrahigh resolution 20” 1600 x 1200 TFT LCD display panel
● Three keyboard selections supporting multiple languages
● Slide rails have two fixed positions to prevent movement of both LCD and
keyboard drawer
● Build-in slide rail and mounts easily in any 19” cabinet
● Built in On Screen Display controlled by integral membrane switches.
● Lightweight Aluminium construction – with black anodize finish
● Supplied with 12 VDC remote power adapter (single power source)
● Built-in KVM switch function for easy controlling and monitoring up to 16
residing servers/ platforms
● Support eight characters password protection and search PC server name
● Auto scan mode for monitoring PCs and flexible scan time from 5~99
seconds
● Hot Pluggable - Add PCs or remove connected PCs for maintenance
without powering down the KVM switch or PCs.
● Easily switch Individual button to select the PC channel using the push-
button channel selector switches, Hot Keys, or via the On-Screen Display
(OSD) Menu
Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation

RKP220 User Manual
Rev. : 2.0 P.3
4. Package Contents
Before Unpacking
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
● The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or
mounted into a suitable cabinet.
● Make sure the place has good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
● Convenience for connecting the LCD Keyboard Drawer to the related facilities should be
well considers too.
Unpacking
The LCD keyboard drawer comes with the standard parts shown as above. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the
supplier immediately.
LCD Keyboard Drawer 1 Piece
User Manual 1 Piece
DC Power Adapter 1 Piece
Power Cord 1 Piece
Mounting Bracket 1 Pair
Fasteners 4 Pieces
CD-6 3-in-1 KVM cable 8 Pieces

RKP220 User Manual
Rev. : 2.0 P.4
6. Peripheral Products
5. Optional Accessories
KVM Cable
CD-6 / CD-10 / CD-15 6ft / 10ft / 15ft PS/2 3-in-1 cable
Cascade Cable
CA-2 / CA-6 / CA-10 / CA-15 2ft / 6ft / 10ft / 15ft PS/2 3-in-1 cable
Conversion Adapter
SUN-31 SUN / iMac USB to PS/2 adapter
Video Input Composite, S-Video
DC Power Input 12V/ 24V/ 48V DC Power Supply
Others
Model Description
CV-401 / CV-801 / CV-1601 4-port / 8-port / 16-port PS/2 KVM
switch
CV-1602 16-port 2-Console PS/2 KVM switch
CV-S801/ CV-S1601 8-port / 16-port USB KVM switch
CV-S1602 16-port 2-Console USB KVM switch

RKP220 User Manual
Rev. : 2.0 P.5
Please read all of these instructions carefully before you use the device.
Save this manual for future reference.
● Unplug the LCD Keyboard Drawer from the power outlet before cleaning.
● Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a
neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen
slightly with it.
● Do not expose the LCD Keyboard Drawer directly to rain, water, moisture or
sunlight.
● Avoid pressure on the LCD screen to prevent permanent damage to the display.
● Do not attempt to service the device yourself. Improper operation may void your
warranty. Refer all servicing to qualified service personnel.
● Safe storage environment of the LCD Keyboard Drawer is ranging between –20oC
and 60oC. Permanent damage could occur if the LCD Keyboard Drawer is stored
outside the safe range.
● Unplug the LCD Keyboard Drawer immediately and call qualified service
personnel under the following conditions:
1. If the monitor has been exposed to rain, liquid or water.
2. If the monitor has been dropped or the casing has been damaged.
What the warranty does not cover
1. Any product, on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied
with the product.
b) Repair or attempted repair by anyone not authorized by us.
c) Any damage of the product due to shipment.
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuation or failure.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other causes which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
7. Important Safeguards

RKP220 User Manual
8. Structure Diagram
1. Keyboard
2. Aluminium front panel
3. Class A active matrix TFT LCD panel
4. Rear metal case
5. LCD inverter
6. LCD membrane
7. Ball bearing telescopic slides with stopper
8. Adjustable mounting bracket
9. KVM switch module & membrane (KVM option only)
cdefg
ijhk
k
Rev. : 2.0 P.6

RKP220 User Manual
RKP220 2U 20” LCD Keyboard Drawer
9. Dimension Diagram
Rev. : 2.0 P.7
Side View
Front View
Top View
20” LCD

RKP220 User Manual
Rev. : 2.0 P.8
LCD
Session

RKP220 User Manual
Rev. : 2.0 P.9
10. LCD Session
LCD Membrane Diagram
Left Right Auto Config
Menu/SelectionPower
Main Menu
Image
● To enter into the Brightness, Contrast, Sharpness, Saturation, Hue sub-
menu
Geometry
● To enter into Auto Conflg., H. Position, V. Position, Clock, phase sub-menu
Function
● To enter into the OSD Position, OSD Zoom and Color Temp. sub-menu
System
● To enter into the Language, Time, Power OFF and Reset sub-menu.
LCD OSD Menu Operation

RKP220 User Manual
10. LCD Session
Image
Brightness
To adjust brightness level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from 0-100
Contrast
To adjust the contrast level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from 0-100
Sharpness
To adjust the sharpness level of the input signal
Use the Tbutton to select the function, then use W/X’button to adjust from 0-35
Saturation
To adjust the saturation level of the input signal
Use the Tbutton to select the function, then use W/X’button to adjust from 0-100
Hue
To adjust the Hue level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from (–19)-0-(+19)
Rev. : 2.0 P.10

RKP220 User Manual
Rev. : 2.0 P.11
10. LCD Session
Geometry
Auto Conflg
To perform auto adjustment of the screen output.
Use the Tbutton to select the function, then use the W/Xbutton to select “ Auto Conflg”
H. Position
To adjust Horizontal Position of the screen output.
Use the Tbutton to select the function, then use the W/Xbutton to adjust “H. Position”
V. Position
To adjust Vertical Position of the screen output.
Use the Tbutton to select the function, then use the W/Xbutton to adjust “ V. Position”
Clock
To adjust the width of the image
Use the Tbutton to select the function, then use the W/Xbutton to adjust “Clock” .
Phase
To perform snow noise adjustment of the image.
Use the Tbutton to select the function, then use the W/Xbutton to adjust “ Phase”

RKP220 User Manual
Rev. : 2.0 P.12
10. LCD Session
Function
OSD Position
To perform OSD position selection of the screen
Use the Tbutton to select the function, then use the W/Xbutton to select the digit for
the OSD display region.
OSD Zoom
To perform OSD Zoom function of the OSD image
Use the Tbutton to select the function, then use the W/Xbutton to on/off the OSD
Zoom function
Color Temp.
To perform the Color Temperature selection of the image output
Use the Tbutton to select the function, then use the W/X' button to select “ Stan-
dard”, “Cool”, “Warm” and “User”

RKP220 User Manual
Rev. : 2.0 P.13
10. LCD Session
System
Language
To perform Language selection of the function display
Use the Tbutton to select the function, then use the W/Xbutton to select suitable
display language “ English”, “Chinese (中文)”, “Deutsch”, “Francais”, “Espanol”,
“Italiano” and “Japanese (日本語)”.
Time
To perform time setting of the system.
Use the Tbutton to select the function, then input the time setting and restore
Power OFF
To perform preset power off setting
Use the Tbutton to select the function, then input time setting and use W/Xbutton to
on/off the function.
Reset
To perform reset all stored parameters to factory preset mode
Use the Tbutton to select the function, then use W/Xbutton activate the function.

RKP220 User Manual
Rev. : 2.0 P.14
10. LCD Session
Step 2 – Choose “Properties”
Step 3 – Change the “Screen Resolution”
Step 4 – Change the “Screen refresh rate”
Resolution Settings
For Microsoft Windows
Step 1 – Press right click on the desktop

RKP220 User Manual
Rev. : 2.0 P.15
10. LCD Session
For SUN Servers
● Resolution configuration procedures should be run by qualified SUN
server administrator
● Sun Servers are using resolution at 1152 x 900 x 76Hz.
● Supported resolution mode for 15” LCD:
1024 x 768 x 70/75Hz
● Supported resolution mode for 17”, 19”or 20” LCD:
1280 x 1024 x 75Hz
● You need to change the Sun Server resolution before you connect to
LCD Display.
● Please do the following procedures to change the resolution settings :
1. As root:
You may find the following command “/usr/sbin/m64config”.
2. To view current resolution:
Type “/usr/sbin/m64config – prconf”.
3. To change to 1024x768 @ 70MHz:
Type “/usr/sbin/m64config – res 1024x768x70 now”.
4. The screen will be refreshed.
5. Then type “pkill Xsun”.
And Type “pkill Xsession” to restart the Xsession.
● Under Common Desktop Environment (CDE).
● To change the OpenBoot resolution, you can type the following
command in OK prompt.
1. In OK prompt, type “setenv output-device screen:r1024x768x70”.
2. Type “printenv” to confirm the resolution has been changed
to 1024x768x70Hz.
3. Then type, “reset” to restart the system.
Note :Remember to RESTART the server after these processes.
Note : Remember to RESTART the server after these processes

RKP220 User Manual
Rev. : 2.0 P.16
KVM
Session

RKP220 User Manual
Rev. : 1.0 P.17
11. KVM Session
Front View
Channel Select Button
Selected Channel Bank Button
Bank No.
Shift ButtonOnline Channel
LED Indication
Selected Channel - Displayed channel on monitor& red in
LED.
Channel select button - Press to select channel from 1 – 8.
Shift button - Press & Hold follow with a channel
button to select channel from 9 – 16.
Online Channel - Green LED state the PC has connected
and power on.
Bank no. - Display the Bank no. from 1 – 8.
Bank button - Select the bank from 1 – 8
(for cascade only).