CyberView M-804 User manual

Installation
C
e
b
yr
V
e
iw
C
e
b
yr
V
ei w
■Install each bracket using screws pro-
vided shown in Figure 1.
■Fix the KVM into the rack
* Hardware for fixing the mounting bracket
to the rack is not provided
Figure 1. Installing the bracket to the KVM.
Figure 2. Fixing the KVM into the rack.
AB
screw A: M3.2 x 4.5 mm
screw B: M4 x 10 mm

M-802 / M-803 / M-804 Matrix DB-15 8 port KVM
Package Content (only for rackmount KVM)
Model Receiver
Qty
12V Power adapter
Qty
CE-6 Combo 4-in-1 KVM cable
Qty
M-802 1 1 1
M-803 2 2 2
M-804 3 3 3
KVM switch x 1 pc
Screw M3.2 x 4.5mm x 4 pcs
Screw M4 x 10mm x 8 pcs
Bracket x 1 set
Receiver *Qty refer to the below table
User manual x 1 pc
12V Power adapter (for KVM) x 1 pc
Power cord x 1 pc
12V Power adapter (for receiver) *Qty refer to the below table
CE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table
5
4
2
6
1
3
9
8
7
User
Manual
1 65
4
32 7 8
9
Cat.5 Remote Console
Remote I/OLocal Computer
KeyboardMouseRemoteLocal
Console
Select
VGA9VDC
500mA
10
10

M-802 / M-803 / M-804 Matrix DB-15 8 port KVM
Connection
Connection
Rackmount KVM
M-802
Remote 1
Power
Local
console
out Cascade in
M-803
Remote 1
Local
console
out Cascade inRemote 2
Power
M-804
Remote 1
Local
console
out Cascade in
Remote 3
Remote 2
Power
Remote
Cat6
Console
Cat6 cable up to 300 meters
to remote access server
Local
USB
Console
Servers
CE cable supports PS/2 or
USB interface server
DB-15 KVM port
Power
out
Cascade
in
Remote
Cat6
Console

M-802 / M-803 / M-804 Matrix DB-15 8 port KVM
Connection
KVM modules
CE-6 KVM cable
USB server via CE-6 PS/2 server via CE-6
Connection
CE-6
DB-15 KVM port
VGAKB MS
VGAUSB
Remote
Cat6
Console
Cat6 cable up to 300 meters
to remote access server
Cascade
Remote
Cat6
Console
Power
back Servers
CE cable supports PS/2 or
USB interface server
DB-15 KVM port

Receiver Connection
Keyboard Mouse
Local
Button
Remote
Button
Local
Computer
Monitor Power
Front View Rear View
M-804
Monitor
USB
Cat6 cable
up to 300m
M-802 / M-803 / M-804 Matrix DB-15 8 port KVM
Receiver
Receiver Box
12V DC Power
Adapter
Remote I/O
CE-6 KVM cable
USB server via CE-6 PS/2 server via CE-6
VGAKB MS
VGAUSB

M-802 / M-803 / M-804 Matrix DB-15 8 port KVM
Cascade
■Cascade up to 8 levels, 64 servers
■Interconnection with Matrix Cat6 KVM
■Cascading multiple KVM by CMC-3 cable.
Cascade
Rackmount KVM
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
Power
M-1602
M-802
MU-1602
MU-3202
out
Cascade
in

M-802 / M-803 / M-804 Matrix DB-15 8 port KVM
Cascade
■Cascade up to 8 levels, 64 servers
■Interconnection with Matrix Cat6 KVM
■Cascading multiple KVM by CMC-3 cable.
Cascade
KVM modules
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
M-1602
M-802
MU-1602
MU-3202
Cascade
back

M-1602 / M-1603 / M-1604 Matrix DB-15 16 port KVM
Package Content (only for rackmount KVM)
Model Receiver
Qty
12V Power adapter
Qty
CE-6 Combo 4-in-1 KVM cable
Qty
M-1602 1 1 1
M-1603 2 2 2
M-1604 3 3 3
KVM switch x 1 pc
Screw M3.2 x 4.5mm x 4 pcs
Screw M4 x 10mm x 8 pcs
Bracket x 1 set
Receiver *Qty refer to the below table
User manual x 1 pc
12V Power adapter (for KVM) x 1 pc
Power cord x 1 pc
12V Power adapter (for receiver) *Qty refer to the below table
CE-6 Combo 4-in-1 KVM cable (for receiver) *Qty refer to the below table
5
4
2
6
1
3
9
8
7
User
Manual
1 65
4
32 7 8
9
Cat.5 Remote Console
Remote I/OLocal Computer
KeyboardMouseRemoteLocal
Console
Select
VGA9VDC
500mA
10
10

M-1602 / M-1603 / M-1604 Matrix DB-15 16 port KVM
Connection
Connection
Rackmount KVM
M-1602
M-1603
M-1604
Remote 1
Local
console
out Cascade in
Remote 1
Local
console
out Cascade in
Remote 2
Remote 1
Local
console
out Cascade in
Remote 3
Remote 2
out
Cascade
in
Remote
Cat6
Console
Cat6 cable up to 300 meters
to remote access server
Local
USB
Console
Remote
Cat6
Console
Servers
CE cable supports PS/2 or
USB interface server
DB-15 KVM port
Power

M-1602 / M-1603 / M-1604 Matrix DB-15 16 port KVM
Connection
KVM modules
CE-6 KVM cable
USB server via CE-6 PS/2 server via CE-6
Connection
CE-6
DB-15 KVM port
VGAKB MS
VGAUSB
Remote
Cat6
Console
Cat6 cable up to 300 meters
to remote access server
Cascade
Remote
Cat6
Console
Power
back Servers
CE cable supports PS/2 or
USB interface server
DB-15 KVM port

Receiver Connection
Keyboard Mouse
Local
Button
Remote
Button
Local
Computer
Monitor Power
Front View Rear View
M-1604
Monitor
USB
Cat6 cable
up to 300m
M-1602 / M-1603 / M-1604 Matrix DB-15 16 port KVM
Receiver
Receiver Box
12V DC Power
Adapter
Remote I/O
CE-6 KVM cable
USB server via CE-6 PS/2 server via CE-6
VGAKB MS
VGAUSB

M-1602 / M-1603 / M-1604 Matrix DB-15 16 port KVM
Cascade
■Cascade up to 8 levels, 128 servers
■Interconnection with Matrix Cat6 KVM
■Cascading multiple KVM by CMC-3 cable.
Cascade
Rackmount KVM
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
M-1602
M-802
MU-1602
MU-3202
out
Cascade
in

M-1602 / M-1603 / M-1604 Matrix DB-15 16 port KVM
Cascade
■Cascade up to 8 levels, 128 servers
■Interconnection with Matrix Cat6 KVM
■Cascading multiple KVM by CMC-3 cable.
Cascade
KVM modules
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
CMC-3 cable
M-1602
M-802
MU-1602
MU-3202
Cascade
back

Specifications Matrix DB-15 8 port KVM
Cat5Matrix Cat5Matrix Cat5Matrix
M-802 / M-803 / M-804
▀KVM Port
Number of ports: 8
Connector: 8 x DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable
up to 6, 10 & 15 feet
▀Local Console
Monitor port: 1 x DB-15 VGA (up to 1600 x 1200)
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
▀Cat6 Remote Console
Number of remote port: 1 / 2 / 3
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀Expansion: Up to 64 servers by 8-level cascade
▀Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix
▀Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt
▀Regulatory Approval: FCC, CE
▀Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb
▀Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb

Specifications Matrix DB-15 16 port KVM
Cat5Matrix Cat5Matrix Cat5Matrix
M-1602 / M-1603 / M-1604
▀KVM Port
Number of ports: 16
Connector: 16 x DB-15 combo connector
Connectivity: Combo 4-in-1 KVM cable
up to 6, 10 & 15 feet
▀Local Console
Monitor port: 1 x DB-15 VGA (up to 1600 x 1200)
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
▀Cat6 Remote Console
Number of remote port: 1 / 2 / 3
Monitor port: DB15-pin VGA, up to 1600 x 1200
Keyboard & mouse port: 2 x USB type connector for keyboard & mouse
Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 1,000 feet
▀Expansion: Up to 128 servers by 8-level cascade
▀Compatibility
Multi-platform: Mix PCs, SUNs, IBMs, HPs, DELLs Server
Support: Windows Vista / 2003 / XP / 2000, Linux, Netware, Unix
▀Power
Input: 100~240VAC, 50 / 60Hz 0.5A via AC / DC cord
Option DC: 12V / 24V / 48V DC input
Consumption: Max. 24 Watt, Standby 5 Watt
▀Regulatory Approval: FCC, CE
▀Environmental
Operating: 0 to 50°C
Storage: -5 to 60°C
Relative humidity: 90%, non-condensing
Shock: 50G peak acceleration (11ms, half-sine wave)
Vibration: 58~100Hz / 0.98G (11ms / cycle)
▀Product Information
Dimension (W x D x H): 448 x 180 x 44 mm / 17.6 x 7.1 x 1.73 inch
Net weight: 4 kg / 9 lb
▀Packing Information
Dimension (W x D x H): 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch
Gross weight: 7 kg / 15 lb

KVM Button Matrix KVM Usage
Power ON
■Turn off all servers and KVM switches
■Make sure all cables / connectors are properly connected
■Recommend Power ON sequence is monitor, KVM switch finally computer
Front Panel - Port LED Indications
32 ports
8 ports
Bank no. PC port LEDs Channel
button
Bank
button
16 ports
Bank no. 7-Segment BANK LED indication
PC port LEDs Power : Blue LED on indicating a PC is connecting to the port
Access : Green LED on indicating a selected channel
Remote : Red LED on indicating the port is selecting by a remote console
Channel button Press to select channel from 01 to 32
Bank button Select the bank from 1 to 8
2927262423222120191817
1587
6
5
43
2
1
32
16
3130
9
25
1413121110
28
Matrix
BANK
15876
5
43
2
1 169 1413121110 Matrix
BANK
876
5
43
2
1Matrix
BANK

Password Matrix KVM Usage
The password is disabled by default ( i.e. There is no password required when you power on the KVM switch
for the first time)
■Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field
(Do not use “0” on number pad)
4. In USER level, press Space bar + Enter in user name & password field
Remark: Automatic logout after 10 minutes of inactivity
■Set your own user name & password
1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password
field
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password
b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character
■Change your password
1. Login the KVM in SUPERVISOR level by pressing your own user name & password
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password
b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
Remark: a. Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid
character
■Disable your password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P
3. You don’t need user name & password to access the KVM OSD menu
■Forget your password
Please contact your supplier for further support
Remark:
■You must press the KVM hotkey within 2 seconds
■A beep sound will be heard for successful entering KVM hotkey

OSD operation
next to the system name The PC is powered on
next to the system name The PC is selected
F1 Access F1 MAIN MENU
F2 Logout the OSD menu
F3 Previous menu
Esc Cancel / Quit
Enter Complete / Switch to selected port
Switch to previous or next port
PgUp/PgDn Switch to previous bank or next bank
1 / 2 / 3 / 4 Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32
Remark: Display port 17 ~ 32 for 32 port model only
KVM OSD Matrix KVM Usage
OSD Menu
F1 Main Menu
01 LANGUAGE OSD language change
02 PORT NAME EDIT Define port name
03 PORT SEARCH Quick searching by port name
04 USER SECURITY Change password
05 ACCESS LIST Define user access authority
06 HOTKEY Change hotkey
07 TIME SETTINGS Modify scan display time interval
08 OSD MOUSE Modify OSD mouse speed

KVM Hotkey Matrix KVM Usage
Hotkey Function
Scroll Lock + Scroll Lock + Space Bar Calling OSD menu
Right-button mouse + Esc Calling OSD menu
Scroll Lock + Scroll Lock + Switch to previous port
Scroll Lock + Scroll Lock + Switch to next port
Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank
Scroll Lock + Scroll Lock + Bank no. + Port no. Switch to specific port
Scroll Lock + Scroll Lock + BTurn the buzzer ON and OFF
* Default the buzzer is ON
Scroll Lock + Scroll Lock + PLogout the KVM if password security is
ON. Show up the status windows
Advance hotkeys (for Supervisor login only)
Scroll Lock + Scroll Lock + S
Activate auto-scan mode for connected
servers
*Press any key to exit the auto-scan
mode
Scroll Lock + Scroll Lock + R
Reset all the KVM settings to factory
default
*Except User Security settings
Scroll Lock + Scroll Lock + UDisable and enable password security
*Default security is OFF
Scroll Lock + Scroll Lock + L
To enable / disable the screen saving
function and 10 minutes auto-logout
*Default the screen saving is OFF
Local Console Hotkey
Hotkey Function
Scroll Lock + Scroll Lock + F1 Show up the Help OSD windows
Scroll Lock + Scroll Lock + F2 Select Hotkey
*Default is Caps Lock
Scroll Lock + Scroll Lock + CToggle switch between remote & local port
Scroll Lock + Scroll Lock + QTurn the buzzer ON & OFF
*Default the buzzer is ON
Scroll Lock + Scroll Lock + SActivate auto-scan mode for remote & local port
*The scan time interval is 5 seconds
Scroll Lock + Scroll Lock + AAuto-adjust the video signal
Remote Console Hotkey
Remarks:
■Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”
- Bank No. : 1 to 8
- Port No. : 01 to 16
- e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1+ 0+ 4
- e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2+ 1+ 6
■You must press the hotkey within 2 seconds
■A beep sound will be heard for successful entering
■The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp, PgDn, and Enter keys
are supports

IP Setting Matrix KVM Usage
Quick Installation Guide of IP KVM for remote access
Please perform the follow steps
1. Power off all KVM hardware and connected devices.
2. Connect the power supply to IP KVM
3. Connect the monitor, keyboard & mouse to console port of IP KVM (not applicable to integrated LCD
drawer version)
4. Connect the KVM cable to IP KVM and target servers
5. Use an Ethernet cable to connect your local area network (LAN) to the IP console port on the KVM
Initial IP configuration
The factory default, DHCP mode is disable (IP auto configuration = None), and the preset default address as
below :
IP address : 192.168.1.22 (default)
Subnet-mask : 255.255.255.0
Default Gateway: None
Install the “PSetup.exe” program from the provided CD-disc to a computer which networked with IP KVM
switch, then press Refresh Devices the look for the IP-KVM.
a. Select the MAC address from label on the bottom of the IP-KVM switch
b. Click Query Device
1. Configure the IP KVM with fixed address
a. Setup “IP auto configuration” as “None”; setup IP address and Subnet mask
b. Enter Super user login and password for Authentication (default : super/pass)
c. Setup Device. If super login was authenticated, it’ll show “Successfully configured device”.
Otherwise it’ll show “Permission Denied”.
2. Configure the IP KVM with DHCP
a. Setup “IP auto configuration” as “DHCP”
b. Enter Super user login and password for Authentication (default : super/pass)
c. Setup Device. If super login was authenticated, it’ll show “Successfully configured device”.
Otherwise it’ll show “Permission Denied”.
3. Install JVM on Client system
The IP-KVM switch was remote accessed by a standard JAVA enabled web browser. The client system
must install Sun JVM 1.4.2 or above for remote access the IP KVM.
Remark:
■At a minimum, you must have Internet Explorer 6.0 or Netscape 7.0 or Molliza 1.6 (and above) installed
on your client computer.
a
b