Cyfral COSMO-R User manual

1

-
INTERCOM
COSMO-R

2
Remove the aluminum front panel

2
1

3
Uniphone elements
1. Connector for link the uniphone with unit
2. Volume control
3. 3-posion ringer volume
- loud
- silent
- o
4. Lock release buon
5. Mulfuncon buon connector
16
43
25
1
3
5
4

1. Ring buon UNIPHONE 1
2. Balance adjustment
3. Master key programming jumper
4. Ring buon UNIPHONE 2
5. Volume control
6. RFID antenna
6
2

4

The gure shows the hole spacing for mounng the panel with surface-mounted visor.

• Cables from the power supply unit (AC 11,5 V) ghten to the clamps marked ~11,5V
• Wires of electromagnec clamp to the terminals ZACZEP.
• Uniphone “hot” (+) end of the clamp UN1 and “cold” (-) end to the unit chassis ground marked as
MASA.
  



5






Programming master key
1
2

6

-


 
-
Programming the remaining RFID keys
1
2
3

7
-.
Programming the opening time of electrical lock
 -
-
12



3


8









Manufacturer:
CYFRAL Chabelska i Wspólnicy S.J.
ul. Konstantynowska 62/70
95 - 100 ZGIERZ POLAND
e-mail: [email protected]
www.cyfral.pl
4