Cypress CapSense Express SmartSense CY3280-MBR2 User manual

CY3280-MBR2 CAPSENSE®EXPRESS™ WITH SMARTSENSE™ AUTO-TUNING KIT
QUICK START GUIDE
1. Open the back cover and insert the
batteries in the battery holder.
2. Assemble the top and bottom sections
of the kit using the screw driver.
3. Move the Power Select switch to the
“BAT” position.
1. Touch the Power ( ) button to turn
ON/OFF.
2. Turn ON the kit and ensure that the
Power LED, LED1, and LED2 glows.
1. Touch any button; the respective LED
glows showing one of the LED
effects.
2. For more details about the kit and its
features, see the CY3280-MBR2 kit
guide.
1. Touch more than one button
simultaneously; the touched buttons
glow displaying LED effects.
1
2
3
4

© 2011-2013 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners. Doc. #: 001-71858 Rev. *D
http://www.cypress.com/go/CY3280-MBR2
Insert the kit CD/DVD and install the kit software. View the kit guide for
detailed instructions. For the latest information about this kit, visit
CY3280-MBR2 CAPSENSE®EXPRESS™ WITH SMARTSENSE™ AUTO-TUNING KIT
QUICK START GUIDE
Kit Details
Other Kit Contents:
1. Two AAA batteries (unassembled)
2. Overlay (3-mm thickness)
3. A to Mini-B USB cable
4. Screw driver
5. Five sample CY8CMBR2110 chips
6. CY3280-MBR2 kit CD/DVD
7. Flex-PCB (with 1-mm overlay)
CapSense
Buttons
CapSense-based
Power Button
CapSense-based
Attention Button
USB Power/Status
LEDs
Host Controlled LEDs
Power Select Switch
- EXT: Powered with external source
- GUI: Powered by GUI (EZ-Click)
- BAT: Powered by AAA batteries
USB Connector
Expansion Connector