Cyron ABIG7-A6K URBAN User manual

1
ABIG7/5 LED HEADLIGHT USER MANUAL
Thank you for choosing CyronMotor products! We are committed to provide
the latest lighting technology without any compromises. Please read instructions
completely before starting installation.
TOOLS NEEDED
Consult your vehicle/motorcycle user manual for process of gaining access to headlight
housing and assembly. No special tools needed for Cyron headlights.
CAUTION: HOT SURFACES. DO NOT TOUCH THE
METAL SURFACES OF THE HEADLIGHT. THEY CAN BE
EXTREMELY HOT.
OPERATING IN HIGH-BEAM FOR EXTENDED PERIOD
OF TIME WHILE THE VEHICLE/BIKE IS STATIONARY
WILL CREATE EXCESSIVE HEAT AND WILL
ULTIMATELY CAUSE DAMAGE.
Look for the installation video of this product on CyronMotor.com
and Cyron YouTube channel.
INSTRUCTIONS
Cyron integrated ABIG series LED headlights replace vehicle's entire reflector assembly
which normally includes glass reflector, bulb, mounting rings, rubber boots, etc. Follow
vehicle user manual to gain access to the headlight reflector.
Install Cyron LED light in place of the glass reflector and secure the same method as the
vehicle's reflector was secured. Pay attention to the orientation of the light. It should only fit
in one position to provide secure mounting and correct light pattern.
Wire harness should be a simple plug-in for H4 sockets. For 7" lights two adapters are
provided which should be used as needed; an H13 and Harley 4-pin. H13 fits several
automotive applications. Harley adapter (Cyron# ABIGC2A) is mostly for HD motorcycles
with stock dual-bulb arrangement. (Exception is Roadking 2016+ which needs Cyron
ABIGC3A adapter) YOU WILL NOT BE USING EITHER ADAPTER IF YOUR BIKE/CAR
HAS H4 PLUG. In dual bulb arrangements follow the wire harness and find the black plug
placed inside the fairing. Unplug and replace with the adapter provided.

2
DAYTIME RUNNING LIGHTS (DRL) - 7" LIGHTS: DRL are the small array of LEDs on top
and bottom of the 7" lights. It is powered by a separate lead (normally red wire) aside from
the main plug of the integrated headlight. It is an optional hook up. Connect it to
vehicle/motorcycle's DRL wire if it is so equipped. If you are using the Harley adapter
(Cyron# ABIGC2A ) DRL wire can be connected to the spade plug of the adapter. DRL can
also be connected to the low beam (white) wire. As a final alternative DRL can be
connected via an accessory switch to +12VDC and make it operate manually or as a
accent light . Current draw for DRL is less than 0.5A.
"URBAN" ABIG7-A6K has a 2nd lead (green wire) for amber DRL lights. It can be used as
standard DRL or as directional lights in cars.
ALIGNMENT
For proper operation it is vital to check the aim of the headlight. See guideline. During
testing make sure:
a. The vehicle is on
level surface
b. There are no
excessive loads in the
vehicle effective its
leveling
c. For motorcycles it is
a good idea to align
with the rider on the
bike
d. After alignment do
a road test to assure
proper visibility has
been achieved.
Further adjustment
may be necessary to
get the optimum
performance.
Ensuring undisturbed visibility of other drivers is vital to your safety.
Drive/Ride Safe!

3
WARRANTY
Cyron warrants this product against any defects in materials or workmanship for a period of 1 year from the date of purchase. The
warranty covers normal usage as intended by the factory and does not cover misuse, abuse, accidents, or damages caused due to the
acts of God. Proof of purchase is required.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL CYRON, INC. BE LIABLE, WHETHER IN CONTRACT OR
TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT,
ACCESSORY OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT
THESE DAMAGES MAY BE DISCLAIMED BY LAW.
CUSTOMER AGREES TO INDEMNIFY AND HOLD HARMLESS CYRON INC, ITS OFFICERS, DIRECTORS, EMPLOYEES
AND SUCCESSORS FROM AND AGAINST ANY AND ALL LOSS, LIABILITY, DAMAGES, COSTS, ATTORNEYS’ FEES
OR OTHER EXPENSES ON ANY KIND, ON ACCOUNT OF ANY AND ALL CLAIMS, SUITS JUDGMENTS AND COSTS
ARISING OUT OF ANY ACTUAL OR ALLEGED (I) BODILY INJURY OR DEATH TO ANY PERSON; (II) LOSS, DAMAGE
OR DESTRUCTION OF PROPERTY; (III) DEFECTS IN THE PRODUCTS OR SERVICES; (IV) CLAIMS THAT A PRODUCT
OR THE SALE OF THAT PRODUCT VIOLATED ANY LOCAL, STATE OR FEDERAL LAW OR REGULATION.
Some LED Headlight products are not DOT/SAE approved. Although efforts have been made to maximize road visibility and safety,
all risks are sole responsibility of the user. For warranty claims please visit cyronmotor.com Support link or email
SPECIFICATIONS
ABIG7-A6K
URBAN
ABIG7-B6K
BEAST
ABIG5-A6K
URBAN5
Operating
Voltage
10-30VDC
10-30VDC
10-30VDC
Socket
H4 / H13/H.D.
H4 / H13/H.D
H4
Peak LED
Power, Watts
105W
75
40
Nominal Power,
High Beam
48
48
36
Nominal Power,
Low Beam
28
20
24
LED Chip
Osram
Philips
Cree-XML
Other quality automotive lighting accessories from CyronMotor
Part Number Description/Application
ABH4-BM6K LED bulb ELITE mini, small Harley buckets 5.75"
ABxx-C6K Headlight LED bulb STANDARD, all models, Cars, Trucks, Bikes
ABxx-B6K Headlight LED bulb ELITE, all models, Cars, Trucks, Bikes
AB881-A6K Driving Lamp, LED bulb 880, 881 fitting
ABIG4.5-A6K Driving Lamp, Integrated LED, 4.5" Harley fog lamp
ABIG7-RNG Mounting trim ring, 7" integrated, Chrome
ABIG7-RNG-B Mounting trim ring, 7" integrated, Black
ABIGC3A Adapter H9/11 to H4, Roadking 2016+
AC1156 /57A 2" Harley turn signal LED insert, avail in Red, Amber, White Halo
AC1156 /57PA Pancake Harley turn signal LED insert, avail in Red, Amber, White Halo
AB1156H2 Light bulb Ultra High Power LED 1156 single, Amber, Red, Wht
AB1157H2 Light bulb Ultra High Power LED 1157 dual, Amber, Red, White
AB3157H2 Light bulb Ultra High Power LED 3157 dual contact, Red, White
ABFT100-xx Canbus and EMI noise filter for LED headlights, H4/H7/H9 and more
RC3A12 Tri-Zone accent lighting remote
MLKP7CZ Accent light kit Platinum, Pro grade for mid size cruisers, avail in all 6 solid colors
MLKT10C2FZ Accent light kit Titanium, Pro grade for large cruisers, avail in all 6 solid colors
CV62C-[color] Convex 6LED Cluster, Chrome finish PAIR
CV62-[color] Convex 6LED Cluster, Black finish PAIR
CV610C-[color] Convex 6LED Cluster, Chrome finish BULK PACK 10pcs
CV610-[color] Convex 6LED Cluster, Black finish BULK PACK 10pcs
FL30-[color] FlexLED super flexible strips, 30LED, 12”, Can be trimmed smaller

4
HEADLIGHT FOGGING UP?
Fogging or condensation in the
headlight is a temporary condition
and does not cause a problem with
normal operation of your headlight.
This condition is NOT a defect. In
fact Cyron headlights are designed
to allow moisture to evaporate and
slowly escape the housing,
therefore minimizing reoccurrence
of condensation. The evaporation
process may take some time.
WHY IS THIS HAPPENING?
Polymers, commonly known as
plastics, often times absorb
moisture in the air during the
manufacturing process. Once the
light heats up the moisture is
released and shows up as
condensation on the lens which is
the coolest part of the light.
WHY STOCK LIGHTS NEVER DID
THIS?
LEDs do not run as hot as halogen
or HIDs lamps so the moisture takes
longer to evaporate.
SIGNS OF FUTURE DAMAGE?
If large droplets or pooling of water
is present then this is a sign of
damage and can lead to a system
failure. If a pool of liquid water is
clearly visible and was NOT the
result of physical abuse and or
misuse please contact your local
dealer or Cyron tech support.
CyronMotor.com
This manual suits for next models
2
Table of contents
Other Cyron Flashlight manuals