D-Link DCF-650W - Air Wireless CompactFlash Cf 802.11B... User manual

1
For use with Handheld or Pocket PCs with Windows CE in an “Ad Hoc” or
“Infrastructure” network. This guide is for installation purposes only. Please see
your User’s Manual for more detailed information.
Contents of Package:
•DCF-650W 11Mbps Wireless LAN Compact Flash Adapter
•Quick Install Guide
•Driver
If any of the above items are missing, please contact your reseller.
Before you start make sure that:
You have installed “Microsoft Active Sync” software on your computer or laptop
and a connection has been established between the computer and the PDA.
Note: For more information on synchronizing your PDA to your computer,
please read the User’s manual that came with your PDA.
Installing the DCF-650W Drivers
•Insert the driver CD that came with your DCF-650W into the CD-ROM drive
on your computer.
•The Autorun screen will
appear. Click the Install
Drivers button to install the
driver and utility with the
PDA in the cradle.
Note: When asked for
location, select default
installation location.

2
Installing the DCF-650W Drivers Continued….
Click Next to
continue
Click Yesto
continue
Click OK to
continue
Click Finish to
finish the
installation

3
Inserting the DCF-650W Compact
Flash Adapter
Remove the PDA from the cradle and turn off the unit.
Gently insert the DCF-650W Compact Flash Adapter into the Compact Flash
card slot in your PDA. Now turn on the PDA. The PDA will auto-detect the
DCF-650W Compact Flash Adapter and auto-install the corresponding driver.
Assign an IP address to your DCF-650W Compact Flash Adapter. You can
now either pick a server assigned IP address (via DHCP) or use a specific IP
address (Static IP).
Reset your PDA.
Go to Start, Settings, System and click the DCF-650W CF Card icon.
Configure the parameters for your wireless environment.
The DCF-650W Wireless Compact Flash Adapteris a “ready-to-use” device.
Its default settings are compatible with a typical Infrastructure Wireless LAN.
If you choose to adjust the settings, please see the “Wireless LAN Settings”
section of the User’s Manual.

4
TROUBLESHOOTING
Problem: WinCE returns to the prior application upon restarting.
You can exit the application (for instance, the Utility program) by using the PDA
reset button.
Problem: The wireless connection to the Access Point disconnects.
Reset and force a connection by going to the “Utility” program>select
“Config.”>check parameters>select “Modify” to force a re-connection.
Problem: The PDA “roams” to a new Access Point in a different subnet.
1. Unplug and re-insert the Wireless LAN Compact Flash Adapter
2. “Hard” reset your device to force a “release and renew” of a re-assignment
of the IP Address in a DHCP Access Point environment.
CONTACTING TECHNICAL SUPPORT
You can find the most recent software and user documentation on the D-Link
website.
D-Link provides free technical support for customers within the United States.
U.S. customers can contact D-Link technical support through our web site, e-mail,
or by phone.
United States technical support is available Monday through Friday from 6:00 a.m.
to 6:00 p.m. (PST.)
Web:http://www.dlink.com
Email:[email protected]
Phone:[phone] (option #4)
If you are a customer residing outside of the United States, please refer to the list of
D-Link locations that is included in the User’s manual.