D-Link Express EtherNetwork DNS-120 User manual

DWL-AG700AP Install Guide
Version 1.1
DNS-120
Network Storage Adapter

2 D-Link Systems, Inc.
DNS-120 Install GuideSystem Requirements
System Requirements
Computer with Windows XP or 2000 with an installed
Ethernet Adapter
Internet Explorer 6.0 or Netscape Navigator 7.0 and above
USB Hard Drive
Manual and Software
on CD
Package Contents
D-Link DNS-120
Wireless Storage Adapter
Ethernet Cable 5V 2.5A Power Supply

D-Link Systems, Inc. 3
DNS-120 Install Guide Hardware Overview
Front Panel
Solid green indicates an
Ethernet connection. Blinking
green indicates activity on the
Ethernet network.
Ethernet LED
Solid green indicates
a good power source
connection.
Power LED
Blinking green indicates when the
USB drive is initially connected to the
DNS-120. Solid green indicates the
USB drive is ready for use.
USB LED

4D-Link Systems, Inc.
DNS-120 Install GuideHardware Overview
Rear Panel
Press this button to safely
disconnect USB drives from
the DNS-120.
Disconnect Button
Connects to your router or
switch using the included
Ethernet cable.
Ethernet Port
Receptor for the provided
power adapter.
Power Receptor
This button will restore the
factory default settings.
Reset Button
Connects your USB 1.1 or
2.0 drives to the DNS-120.
USB Ports

D-Link Systems, Inc. 5
DNS-120 Install Guide Installation Overview
Installation Overview
Once you’ve completed your DNS-120 installation, your network
may appear similar to the diagram below.

6D-Link Systems, Inc.
DNS-120 Install GuideHardware Installation
Installing the Hardware
Attach the provided Ethernet cable to the Ethernet port on the rear panel.
1
Attach the other end of the Ethernet cable to an available Ethernet port on
your router or switch.
2
Plug the AC adapter into the receptor located on the back of the DNS-120.
Plug the other end of the AC Adapter into a power strip or wall outlet.
3
4Attach your USB drive(s) to the USB port(s) located on the rear panel of
the DNS-120. The USB LED on the front panel will blink until the drive has
been installed. Once the USB LED is solid green, your USB drive is ready
for use.

D-Link Systems, Inc. 7
DNS-120 Install Guide Confi guration
To access the web-based confi guration, insert the DNS-120 CD into
your CD-ROM drive.
Confi guration
Type admin for the
user name and leave
the password fi eld
blank.
Click Confi g
Click Launch D-Link
Easy Search Utility.
Highlight an available
DNS-120 and click
Confi guration to access
the web-based utility.

8D-Link Systems, Inc.
DNS-120 Install GuideConfi guration
Click Run Wizard.
Click Next.
Enter your new password for
the DNS-120.
Click Next.
Confi guration (continued)

D-Link Systems, Inc. 9
DNS-120 Install Guide Confi guration
Enter the workgroup name
of your network. Enter a
name and a description for
the DNS-120.
Confi guration (continued)
Click Next.
Click Next.
Leave DHCP Client enabled if
your network contains a DHCP
server. If not, select Static IP and
enter the IP address information
to be used. The IP address must
be in the same range as your
network.
Click Next.
Select your Time Zone.

10 D-Link Systems, Inc.
DNS-120 Install GuideConfi guration
Your setup is complete. Please close all web browser windows.
Use the Easy Search Utility to locate and continue advanced
confi guration of the DNS-120.
Confi guration (continued)
Click Close.
Click Restart.