D-Link DSL-504T User manual

DSL-504T
©2004D-LinkSystems,Inc.Allrightsreserved.Trademarksorregisteredtrademarksarethepropertyoftheirrespectiveholders.
Softwareandspecificationssubjecttochangewithoutnotice.DSL-504T.12062004
If any of the above items are missing, please contact your reseller.
Before You Begin:
Check Your Package Contents
ADSL Router
This product can be setup usingThis product can be setup using
This product can be setup usingThis product can be setup using
This product can be setup using
anan
anan
any curry curr
y curry curr
y currenen
enen
ent Wt W
t Wt W
t Web breb br
eb breb br
eb browserowser
owserowser
owser, i.e, i.e
, i.e, i.e
, i.e.,.,
.,.,
.,
Internet Explorer 6 or NetscapeInternet Explorer 6 or Netscape
Internet Explorer 6 or NetscapeInternet Explorer 6 or Netscape
Internet Explorer 6 or Netscape
Navigator 6.2.3 or aboveNavigator 6.2.3 or above
Navigator 6.2.3 or aboveNavigator 6.2.3 or above
Navigator 6.2.3 or above
Pleasereadandmakesureyouunderstandalltheprerequisitesforproperinstallationof
your new ADSL Router. Have all the necessary information and equipment on hand
beforebeginningthe installation.
CD-ROM with Manual
DSL-504T ADSL Router
12VAC, 1.2APower Adapter
Using a power
supply with a
differentvoltage rating
will damage this
product and void its
warranty.
Ethernet Cable
Telephone Cord

2
Hardware Overview
Front Panel
LAN Ports: A solid light
indicates a connection
ontheassociatedport.A
blinking light indicates
activityontheassociated
port.
Status LED: A blinking
light indicates normal
operation.If this light isnot
litandthepowerlightison,
thisindicates failure.
Power LED: Solid light
indicatesaconnectionto
agood power connector.
ADSL LED: Lights solid
when sychronized with
theADSLconnection.

3
Rear Panel
Hardware Overview (continued)
ADSL Port: Connects to
yourtelephone jack usinga
standardtelephonecord.
LAN Ports: Your computers
connect here using standard
Ethernetcables.
Reset Button: Resets the DSL-504T
tothefactory default settings.Holdfor
seven seconds for the unit to factory
reset.
Power Receptor: The AC
PowerAdapterconnectshere.

4
Hardware Installation
Step a
Step b
Step a
Step c
Pleaseseethe following pageforan explanation of stepsa-c, shown above.

5
Hardware Installation (continued)
Connectthe telephone cordfromyour phone
jack to theADSL port on the DSL-504T.
ConnectanEthernetcablefromyourcomputer
to a LAN port on the DSL-504T.
Connect the power adapter to the power
connectorontheDSL-504Tand theotherend
toaknown good powersource.
Step a
Step b
Step c

6
Adminis the defaultUser Name
andPassword.Type admin into
the User name and Password
fields.
Click OK
Type http://192.168.1.1 into the
URL address box and press the
Enter or Return key.
Using the Setup Wizard
Click Run Wizard
Launch your Web browser
(a shortcut is typically found
onyour desktop).
Step a
Step b
Step c
Step d

7
Using the Setup Wizard (continued)
Click Next
This screen allows you to enter
a new password for the admin
account. This password is used
to log into the web-based
managementinterface.
SelectyourTimeZone
Click Next
Click Next
Step e
Step f
Step g

8
You will need to select the Internet Connection Type. If you are unsure which type of
InternetConnectionyouhave,pleasecontactyourInternetServiceProvider.Therearefour
connectionmodes and settings varydepending on theconnection type.
1. Dynamic IPAddress - see Dynamic IP Address on page 8.
2. Static IPAddress - see Static IP Address on page 9.
3. PPPoE/PPPoA - see PPPoE/PPPoA on page 9.
4. Bridge Mode - see Bridge Mode on page 10.
A checklist of necessary settings is provided in the Appendix. Contact your Internet Service
Provider to obtain the necessary details.
Using the Setup Wizard (continued)
Click Next
Click Next
ClickClone MAC Address
Dynamic IP Address
Select your Connection Type
andproceed to step h1, h2, h3,
or h4 depending upon your
connection type.
The DSL-504T defaults to the
most commonly used values in the
United States.
Note: If the MAC address does not
appear, please refer to the User
Manual on the CD-ROM.
2c
Step h
Step h1
Step h1
Step h2
Step h3
Step h4

9
Using the Setup Wizard (continued)
Static IP Address
Click Next
PPPoE/PPPoA
Click Next
The DSL-504T defaults to the most
commonly used values in the United
States. The IPaddress information on
the right is only shown as an example
of the format that you will use.
The DSL-504T defaults to the most
commonly used values in the United
States. Only modify these settings if
youaresuretheyneedtobechanged.
The User Name and Password will
be unique to your Internet account.
If you forget your account information,
please contact your Internet Service
Provider.
Step h2
Step h3

10
ClickRestart
Configurationiscomplete!Typein
a URL such as www.dlink.com
to test your connection.
Bridge Mode
Click Next
Using the Setup Wizard (continued)
Step h4
Step i
Step j