D-Link DIR-505 Manual

-1-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Technical Support Setup Procedure
FAQ : How To Configure Repeater Mode on DIR-505 via
Installation Wizard
Release date : 24/07/2012
Model Support : DIR-505
H/W:A1
S/W:1.03

-2-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Technical Support Setup Procedure
Repeater Mode DIR-505
Installation Wizard
Note : SharePort DIR-505 
 Repeater
1:DIR-505 Repeater 
LED 
Step 1: Make sure the hardware switch on the DIR-505 is under ‘Repeater’mode. Wait for the LED
light to turn green before accessing the router.
Switch to Repeater mode
Green LED

-3-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
2 : DIR-505  (
LAN) IP Address manual DIR-505
Repeater Mode.
Note : IP Address DIR-505 192.168.0.1
Step 2: Please connect your PC to DIR-505 via Ethernet cable. Configure manual ip address in your
PC in order to access DIR-505 in Repeater mode.
Note: The default IP Address of DIR-505 is 192.168.0.1.
3:http://192.168.0.1 
DIR-505

-4-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00

Log In
Step 3: Open web browser on your PC, type in the ip address of DIR-505 - http://192.168.0.1 to
enter the DIR-505 configuration page.
Default password is blank. Please enter your password if you have changed it. Click Log In.
4:SETUP > SETUP WIZARD Launch Wireless Setup
Wizard
5:Next

-5-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
6:Manual Next
Note : WPS only WPS
7:Connect
Step 7: Select your main router wireless network name and click Connect.
8: (Wireless password) Next
Step 8: Please type in the pre-shared key / wireless password of your main router. Click Next.

-6-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
9:Save DIR-505 
10 :
1. 2 IP Address 
2. (LAN) DIR-505 


-7-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Technical Support Setup Procedure
How To Configure Repeater Mode on DIR-505 via Installation Wizard
Note: SharePort Function is not available when DIR-505 is in
Repeater Mode
Step 1: Make sure the hardware switch on the DIR-505 is under ‘Repeater’ mode. Wait for the LED
light to turn green before accessing the router.
Switch to Repeater mode
Green LED

-8-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Step 2: Please connect your PC to DIR-505 via Ethernet cable. Configure manual ip address in your
PC in order to access DIR-505 in Repeater mode.
Note: The default IP Address of DIR-505 is 192.168.0.1.
Step 3: Open web browser on your PC, type in the ip address of DIR-505 - http://192.168.0.1 to
enter the DIR-505 configuration page.
Default password is blank. Please enter your password if you have changed it. Click Log In.

-9-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Step 4: Go to SETUP>SETUP WIZARD. Click on ‘Launch Wireless Setup Wizard’ button.
Step 5: Click Next.
Step 6: Select ‘Manual’, Click Next.
Note: You may choose ‘WPS’ only if your main router supports WPS function.

-10-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Step 7: Select your main router wireless network name and click Connect.
Step 8: Please type in the pre-shared key / wireless password of your main router. Click Next.

-11-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Step 9: Click Save. The DIR-505 will reboot.
Step 10:
1. Back to Step 2. Remove the ip address that you have configured on Step 2.
2. Unplug the Ethernet cable from your PC to DIR-505 and place it at the location that
you need to extend the wireless coverage.

-12-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
 
Call Center  02-6617997
: 9.00 –18.00 
Thai: Mon –Fri : Time 9.00 –18.00.
: 18.00 
English : Sat –Sun , Public Holiday and after 18.00 weekday.
Website : www.dlink.co.th
email: [email protected]m.sg
Facebook : http://www.facebook.com/DLinkThailandFans

-13-
FAQ : How To Configure Repeater Mode on DIR-505 via Installation Wizard - Version 1.00
Nationwide D-Link Service Centres