DAccess Security Systems ML10 Series User manual

ML10/PL10 Series
DIY Smart Lock With Fingerprint
Security Make your life easy and safe
ML10/PL10 series is a smart lock with embedded
fingerprint recognition technology. It is DIY
design, which can replace knob lock easily and
quickly. You even can do it by yourself.

Safe and Convenient
Forgot or lost your
key? In a hurry?
Can’t remember your password?
Your finger is your key.

Rugged, sleek and compact design
Zinc alloy metal casing
Decorated with acrylic panel or stainless steel panel

Touch to Open
With infrared sensor detection, no need to press power button.

Idle handle design
When the door is locked, the
clutch is in idle position, the
handle will be turned. However,
the door will remain locked. This
is crucial for the prevention
of a forcible entry.

Reversible design
Handle and strike are reversible design, which fits all door open direction
right outward
left outward
right inward
left inward

Optional lock body
American standard single latch
German standard mortise with one
- Backset is adjustable (60mm or 70 mm)
latch and one deadbolt
- Turn handle upward to lock the deadbolt for more security
93mm 104mm
70mm
70
mm
60mm
m
m
57m
22mm
108m
73m
10.50mm
15.mm

Easy to replace
Backset is 60 mm (2 3/8 inch) or 70 mm (2 3/4 inch), which can
replace knob lock perfectly. There is no risk to damage the door.

Easy to install
Easy installation with just a screwdriver- no wiring
required Installation steps are showed with pictures

Easy to use
With Quick Start Guide
sticked on the battery cover
3 steps to register the first
Admin Provide operation
instruction video & user manual
QUICK START GUIDE
1
2
3
Add Delete Admin-10
Normal User-60
Temporary User-20
Power-on Operation: Touch the infrared sensor hole on the inner
side of ngerprint sensor holder.
Register First Admin: Touch the infrared sensor hole to power
lock -> Press button ->Place one nger 3 times on the ngerprint
sensor (The •rst user will be the •rst Admin automatically).
Register User: Touch the infrared sensor hole to power lock ->
Press button ->Place any admin nger 1 time to verify Admin->
Press / / button to select user group ->Place one selected user
nger 3 times on the ngerprint sensor.
Delete User: Touch the infrared sensor hole to power lock -
> Press button ->Place any admin nger 1 time to verify
Admin ->Long-press / / button 3 seconds to delete the
selected user group.
Enable Normal Open: Place any registered nger 1 time
to do veri cation -> Long-press button 3 seconds
Disable Normal Open: Place any registered nger 1
time to disable.
Remarks: 1) Success Indication: The indicator light will be Green,
and comes with a long “beep”. 2) Failure Indication:The indicator
light will ash Red light twice, and comes with two short “beep”.
QUICK START GUIDE
12
Admin-10 Normal User-60 Tempor
eration: Touch the infrared sensor
hol rint sensor holder.
Admin: Touch the infrared sensor hol
button ->Place one nger 3 times on th
st user will be the •rst Admin auto :
Touch the infrared sensor hole to pow
>Place any admin nger 1 time to verif
Delete user
Add user
Admin user
Normal User
1
2
3
Temporary User

Quality is reliable
moisture-proof
Keep testing clutch
motor 60000 times
PCB surface with epoxy encapsulated
is moisture-proof design
1 year warranty service

Low battery warning
If the lock is in low battery,LED
and buzzer will make the
indication. The door can be
opened 100 times since you are
notified of low battery. You have
enough time to change the battery.
Mechanical key and 9V battery can be
used for emergency unlocking if the
batteries are completely died.
9V

Normal Open Mode
When you host a social event, it is inconvenient if people
frequently enter and leave. In this case,you can set the lock to
Normal Open mode, and no need to unlock. Just enjoy your party !

PL10 / PL10D
If you need the same features
with lower price
PL10/PL10D with rugged casing of
ABS material is the best choice !

Specifications
Model Name
ML10
PL10
ML10D
PL10D
Material
Zinc Alloy
ABS
Zinc Alloy
ABS
Lock Body
American standard single latch
German standard morise with one latch and one deadbolt
Backset
60mm or 70mm(adjustable)
70mm
Admin -10
User Capacity
Normal User - 60
Temporary User - 20
Operating Temperature
0-45°C
Power Supply
4 x AA Alkaline Battery(NOT supplied)
Backup Unlocking Way
Mechanical Key & 9V Battery
Dimensions
Front - 69(W)×155(L)×35(D) mm
Back - 69(W)×155(L)×25(D) mm
30-38 mm (optional)
Door Thickness
39-46 mm (standard)
47-54 mm (standard)
55-60 mm (optional)
Battery Life
Over 6000 times (approx1 year)

DAccess Security Systems Pvt. Ltd.
Office No.05, 3rd Floor,
Revati Arcade-||, Sr. No.-1/1A/1/1/7/3,
Opposite to Kapil Malhar Society,
Baner, Pune -411048, Maharashtra, India.
Phone No.: [phone] / 41201237, [phone]
Email: [e-mail] | Website: www.daccess.co.in