Dacor Epicure ED30 Technical manual

PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: [phone]
Specifications are subject to change without notice.
See installation instructions for additional details. 10.1
30” Wide Dishwashers
ED30, ID30
SIDE VIEW - DOOR OPEN SIDE VIEW - DOOR OPEN
Model No. Power Requirements
Water
Pressure
Water
Temperature
Approximate
Shipping Weight
ED30 15 A, 120 Vac, 60 Hz dedicated, grounded, three
prong power outlet. See model number label on
product for total connected loaded.
20 to 120 psi
(138 - 827 kPa) 120°F, minimum
215 lbs.
ID30 218 lbs.
1/2
23 3/4” (603mm)
ED Door Panel
Height
29 5/8" (752mm)
ID Door Panel
Height
26 7/8" (683mm)
1 1/8"
(29mm)
47" (1194mm)*
* Allows for drain hose on back of unit
19 1/4" (489mm) to
20 1/4" (514mm)*
36 1/4"
(921mm)
to
34"
(864mm)
Adjustable
Toe-kick
Front Plate
1 5/8"
(41mm)
ED or ID30 – 29 7/8" (759mm)
Cycle ON indicating lights
FRONT VIEW
ED or ID30 – 30" Min. (762mm)
Utilities Access Hole
34”
(864mm)
to
36 1/4"
(921mm)
5"
(127mm)
8"
(203mm)
Anti-tip anchor into material under
countertop or adjacent cabinets
90˚ 90˚
24" Min.
(610mm)
CUT-OUT FRONT VIEW
Revised
01/08/08

PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: [phone]
Specifications are subject to change without notice.
See installation instructions for additional details. 10.2
30” Wide Dishwashers
ED30, ID30
2/2
CUSTOM PANEL OVERALL DIMENSIONS
(ID MODEL ONLY)
Model No. Width Maximum Height Maximum Thickness
ID30 29 7/8” (760mm) 30” (762mm)* 3/4” (19mm)
CUSTOM PANEL INSTALLATION (ID30 ONLY)
6 7/8"
(175mm)
18"
(457mm)
1/2"
(13mm)
7/16" (11mm)
CUSTOM PANEL HOLE ALIGNMENT
ADJUSTING THE DISHWASHER DOOR
Conterbalance
screw
*Without installation of a custom toe kick, see template included with product
for further details.
Revised
01/08/08