DAE AMR130-R User manual

0
DAE Instrument
User Manual
AMR130-R
Setting Tool
V 1.0
https://www.daeinstrument.com

1
Index
I. About AMR130-R/RN
A. Hardware Specification--------------------------------------------------------------------------------02
B. Outward Appearance Overview --------------------------------------------------------------------02
II. Setting Details
A. AMR130-R
1. Baud Rate-------------------------------------------------------------------------------------------03
2. Add--------------------------------------------------------------------------------------------------03
3. Read Parameter-------------------------------------------------------------------------------------03
4. Pulse Value (Read)---------------------------------------------------------------------------------04
5. ELC-------------------------------------------------------------------------------------------04
6. ADD-------------------------------------------------------------------------------------------------04
7. Dec---------------------------------------------------------------------------------------------------05
8. Pulse Value------------------------------------------------------------------------------------------05
B. RF Settings
1. Connect---------------------------------------------------------------------------------------------06
2. Read Parameter-------------------------------------------------------------------------------------06
3. Air Rate-----------------------------------------------------------------------------------------06
4. Power------------------------------------------------------------------------------------------------06
5. RF ID-----------------------------------------------------------------------------------------07
6. Channel and Feq-----------------------------------------------------------------------------------07
7. Set Parameters--------------------------------------------------------------------------------------07
8. Reset Parameters-----------------------------------------------------------------------------------08
9. Disconnect------------------------------------------------------------------------------------------08

2
I-A. Hardware Specification:
AMR 130-R/RN PRODUCT SPECIFICATION
Dimension
63x95x54 mm
I/O I Interface
Pulse In
v
USB
v
RF
v
Display
AMR130-R: v
AMR130-RN: x
Device
Address
1~254
Baud Rate
9600
Water Meter
Dec.
0 / 0.0 / 0.00
Pulse Rate
1 / 4 / 8 / 10 / 16 / 32 / 64 / 100 / 160 /
320 / 640 / 1,000 / 2,000 / 10,000 /
20,000
RF
RF Setup
v
RF Frequencies
902.125 ~ 927.125 MHz
(Default: 915.125 MHz)
RF Air bps
0.3 ~ 62.5 kbps
(Default: 2.4kbps)
Long Distance Range
5km
Transmit Power
DC Input
DC 12V~15V / 12W
I-B. Outward Appearance Overview:
Input Power
DC12V~15V
Pulse Indicator
Water Meter Pulse Input
RF TX/RX Indicator
Display
Micro USB
USB is only used to
connect computer
to set device parameters.
Indicator light:
Green: AMR130-R/RN operating mode
Orange: RF setting mode
Antenna Input

3
II.-A AMR130-R
○
1 Baud Rate:
The default value of Baud Rate is 9600. Please don’t make any adjustment to this blank.
The baud rate can be understood as the number of symbols transmitted in a unit time. The higher
the baud rate, the more symbols can be transmitted in a unit time.
○
2Add:
The default value of Add is 255. Please enter the Add that showed on the AMR130-R/RN hardware.
○
3 Read Parameter:
Please click the “Read Parameter” button to get corresponding parameters.
Input Power
DC12V~15V
Water Meter Pulse Input
Antenna Input
USB
USB is only used to
connect computer
to set device parameters.
Indicator light:
Green: AMR130-R/RN operating mode
Orange: RF setting mode
1
2
5
4
3
8
7
6
Pulse Indicator
Wireless Communication
TX/RX Indicator

4
○
4 Pulse Value (Read):
•This column could not make any adjustment. It could only
be read.
○
5 E L C Settings:
・y: Electricity ；n: Water
The default value is “y”.
・Please click “ELC” button to save settings after making any
alteration.
○
6 ADD Settings:
・Users could edit the ADD just by entering the number
directly. (Range: 1~254)
・Please click “Set ADD” button to save after making any
alteration.
❑Friendly Notice:
・If Add blank at the top-right corner was 225, the alteration here would change all old ADD into
new one. On the other hand, If Add blank at the top-right corner was 3, then, the alteration here
will only change AMR130-R which Add is 3.
・Let’s assume that the blank Add at top-right corner is 255 and user enter 5 here. Then, all the
ADD of AMR130-N will be transformed into 5.
・For another instance, the blank Add at top-right corner is 6 and user enter 20 here. Then, the
AMR130-R/RN which is 6 will be transformed into 20.

5
○
7 Dec Settings:
・Users could choose which decimal they want to adopt.
(Integer / Decimal / Two Decimal Places)
・Please click “Set Dec” button to save after making any
alteration.
○
8 Pulse Rate Settings:
・There are multi choices of Pulse Rate.
・Please click “Set Pulse Rate” button to save after making
any change.

6
II.-B RF
○
1 Connect &
○
2 Read Parameter:
・Please click “Open Connect” button to activate
the
setting tool.
・Please click “Read Parameters” button first to get
the corresponding parameters.
❑Friendly Notice:
The “Read Parameter”,“ Set Parameters” and
“Reset Parameters” these three buttons will be
activated after clicking “Open Connect” button.
○
3 Air Rate:
・Default value 2.4 kbps.
○
4 Power:
・There are multi choices of Power.
The default value is 30dBm.

7
○
5 RF ID:
・This address is different from the former one. It is
the ID of RF. (Range: 0~65535)
○
6 Channel & Feq:
・There are multi choices of Channel.
The default value is 65. (Range: 52~77)
・The value of Feq will follow with Channel.
○7Set Parameter
・Please remember to click “Set Parameters” to save
all the settings after making any change.

8
○
8 Reset Parameters
・Users could click “Reset Parameters” button to
rectify again.
○
9Disconnect
・Please remember to click “Close connect” button
to finish all the settings.
❑Friendly Notice:
The indicator light has to be orange during setting
parameters. It will turn into to green after clicking
“Close Connect”.

9
https://www.daeinstrument.com
2020 DAE Instrument Corporation. All Rights Reserved.