Daesang Humanc MSS-V01 User manual

Contents
Cover ------------------------------------------------------------------------------------ 1
Contents ----------------------------------------------------------------------------------- 2
Components ------------------------------------------------------------------------------ 3
Main Name -------------------------------------------------------------------------------- 4
How to install ----------------------------------------------------------------------------- 5
Main cable connection diagram --------------------------------------------------------- 6
Main body power cable connection diagram ------------------------------------------ 7
How to use -------------------------------------------------------------------------------- 8
Product warranty ------------------------------------------------------------------------- 9
Company information ------------------------------------------------------------------- 10

Components
Motorcycle Security system
(MSS) MAIN BOX MSS remote control MSS Manual
START
ECU Cable

Main Name
ECU(Electronic Control Unit) MSS Cable

How to install
1. Cut the cable at the ECU. 2. Connect the ECU cable and
MSS cable with the same color.
3. Disconnect the MSS cable and
connect the MSS.
4. Connect the power (DV12V)
to the main body
+ Connect to the passing line
Caution : Please check if the input power DC12V is correct.
If DC12V does not work, it may not work properly.

Main cable connection diagram
DC12V
+
-Fleet of earth
grey ①
②
③
④
⑤
⑥
grey
grey grey
grey
grey grey ①
②
③
④
⑤
⑥
black
red
green
blue
yellow
Caution : When connecting the ECU cable, the connector pin number and cable color must be the same.

Ignition coil ECU
Wiring
battery(DC12V)
Generator
Main key
Fleet of earth
plug
-+
[ MSS ]
Motorcycle Security
System
+
-
DC12V
Main body power cable connection diagram
+Passing line

How to use
OFF ON OFF
ON
START
1. Put the key in the motorcycle
key box 2. Turn the key to “ON”.
At this time, “beep~beep” sounds
(Theft Prevention System (MSS) “ON”
sound)
4. Motorcycle start “start”
button Press to start.
3. Press the START button on the remote
control. At this time, “beep~beep” sounds
(This is the sound of the theft prevention
system (MSS) “operation”)
START

Product warranty
Product
Motorcycle Security System
Model MSS-V01
Date of manufacture
manufacturer
Daesang
Humanc Co., ltd.
This product is manufactured through a strict quality control and inspection process.
This product will be repaired free of charge in accordance with the Product Liability
Act for defects in performance and functionality that occur during normal use within
the warranty period, and if repair is not possible, we will replace the product.
【Paid Service 】
●Performance defects and breakdowns occurring after the warranty period has elapsed
●Failure caused by intentional or negligence by consumers within the warranty period
●Failure due to abnormal power supply or poor installation
●Failure or defect due to natural disaster
●Failure caused by our installation and installation by a company other than our agency
This warranty is required when requesting repairs, so please keep this warranty.
If you want our service, please contact the agency where you purchased the product
or the consumer consultation office of the head office.

Company information