
EN - 8
1.2 Installation warnings
Before using your fridge freezer for the rst 
time, please pay attention to the following 
points:
• The operating voltage for your fridge 
freezer is 220-240 V at 50Hz.
• The plug must be accessible after 
installation.
• Your fridge freezer may have an odour 
when it is operated for the rst time. This 
is normal and the odour will fade when 
your fridge freezer starts to cool. 
• Before connecting your fridge freezer, 
ensure that the information on the data 
plate (voltage and connected load) 
matches that of the mains electricity 
supply. If in doubt, consult a qualied 
electrician.
• Insert the plug into a socket with an 
ecient ground connection. If the socket 
has no ground contact or the plug does 
not match, we recommend you consult a 
qualied electrician for assistance.
• The appliance must be connected 
with a properly installed fused socket. 
The power supply (AC) and voltage at 
the operating point must match with 
the details on the name plate of the 
appliance (the name plate is located on 
the inside left of the appliance).
• We do not accept responsibility for any 
damages that occur due to ungrounded 
usage.
• Place your fridge freezer where it will not 
be exposed to direct sunlight.
• Your fridge freezer must never be used 
outdoors or exposed to rain.
• Your appliance must be at least 50 cm 
away from stoves, gas ovens and heater 
cores, and at least 5 cm away from 
electrical ovens.
• If your fridge freezer is placed next to a 
deep freezer, there must be at least 2 
cm between them to prevent humidity 
forming on the outer surface.
• Do not cover the body or top of fridge 
freezer with lace. This will aect the 
performance of your fridge freezer.
• Clearance of at least 150 mm is required 
at the top of your appliance. Do not place 
anything on top of your appliance.
• Do not place heavy items on the 
appliance.
• Clean the appliance thoroughly before 
use (see Cleaning and Maintenance).
• Before using your fridge freezer, wipe all 
parts with a solution of warm water and 
a teaspoon of sodium bicarbonate. Then, 
rinse with clean water and dry. Return all 
parts to the fridge freezer after cleaning.
• Use the adjustable front legs to make 
sure your appliance is level and stable. 
You can adjust the legs by turning them 
in either direction. This must be done 
before placing food in the appliance.
• Install the two plastic distance guides (the 
parts on the black vanes 
-condenser- at the rear) 
by turning it 90° (as 
shown in the gure) to 
prevent the condenser 
from touching the wall.
• The distance between 
the appliance and back wall must be a 
maximum of 75 mm.
1.3 During Usage
• Do not connect your fridge freezer to 
the mains electricity supply using an 
extension lead.
• Do not use damaged, torn or old plugs.
• Do not pull, bend or damage the cord.
• Do not use plug adapter.
• This appliance is designed for use by 
adults. Do not allow children to play with 
the appliance or hang o the door.
• Never touch the power cord/plug with wet 
hands. This may cause a short circuit or 
electric shock.
• Do not place glass bottles or cans in the 
ice-making compartment as they will 
burst when the contents freeze.
• Do not place explosive or ammable 
material in your fridge. Place drinks with