54
PRECAUTIONS HOW TO ASSEMBLE
■ Before using, please make sure the network voltage coincides with the product rated voltage.
■
When in use, do not block or shelter the rear outlet cover to avoid influencing normal air
exhaustion. Otherwise, the motor will be damage by overheat.
■
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
■
Keep the appliance away from stove or any other high temperature objects so as not to
influence its operation by deforming its plastic parts.
■ Do not bend, pedal, pull or carry by the flexible hose. Stop using the broken or
damaged hose.
■
When you need to clean or repair your appliance or stop operation, unplug from the
power outlet. To unplug, be sure to hold the plug, but not pull or carry by the power
cord.
■
To use the appliance, take care to place dust bag in good place, Do not use it without
dust bag in its position.
■
When sucking, do not suck up such particles as mud, paste and wall ashes, otherwise it
may result in obstruction to the dust bag or air filter or damage to the motor. If sucking
up these particles, please immediately clean the dust bag and air flow filter.
■
When in use, do not suck up suck hair rolls, large paper rolls or other objects which may
easily lead to block the suction hole or suction tube or hose. Otherwise it may cause
breakdown or deforming of body cover. If any block occur to the suction, immediately
stop operation by unplugging from the outlet for cleaning.
■
When cleaning the appliance, wet cloth soaked with water or neutral detergent shall be
used instead of gasoline or banana water. Otherwise it may lead to breakage of fade
ness of the body cover.
■
Press the button on top of the
plastic suction tube head and
then push it in the direction of
air inlet hole till locked
■
When discharge the hose,
press the button on top of the
plastic suction tube head and
then pull it back out towards
you.
■
How to use connecting tubes
and curved wand?
When connecting, insert the
bigger end of the connecting
tube into air flow handle and
then swivel it to firm connection.
■
Connection of the tubes. Refer
to the above said.
■
Connection of connecting tube
with floor brush. For connection,
insert the smaller end of
connecting tube into the tube on
the floor brush, and then swivel
it to firm connection.
■
Regarding the connection of
connecting tubes with crevice
nozzle, refer to the above said.