Dahua DH-VTO9221D User manual

1
10-inch Touch Screen VTO User’s Manual
V1.0.1

2
Table of Contents
Table of Contents......................................................................................................2
1Product Overview ........................................................................................6
1.1 Introduction to Product....................................................................................6
1.2 Features.......................................................................................................... 6
2Structure......................................................................................................7
2.1 Front Panel .....................................................................................................7
2.2 Rear Panel......................................................................................................9
3Networking................................................................................................. 11
4Installation and Debug............................................................................... 12
4.1 Device Wiring................................................................................................ 12
4.2 Installation.....................................................................................................12
4.2.1 Screw.................................................................................................. 12
4.2.2 Installation Step .................................................................................. 13
4.3 Device Debug ............................................................................................... 13
4.3.1 Before Debugging............................................................................... 13
4.3.2 Debug Device (VT System)................................................................. 14
4.3.3 Successfully Debug............................................................................. 18
5WEB Config............................................................................................... 21
5.1 WEB Login and Logout ................................................................................. 21
5.1.1 Login................................................................................................... 21
5.1.2 Logout................................................................................................. 21
5.2 System Config............................................................................................... 22
5.2.1 Local Config........................................................................................ 22
5.2.2 LAN Config ......................................................................................... 27
5.2.3 Device Manager.................................................................................. 28
5.2.4 Network Config ................................................................................... 33
5.2.5 Video Set............................................................................................ 38
5.2.6 User Manage ...................................................................................... 39

3
5.2.7 IPC Information................................................................................... 41
5.2.8 Publish Information ............................................................................. 42
5.2.9 UPnP Setup........................................................................................ 43
5.2.10 Fingerprint Info.................................................................................... 44
5.3 Info Search.................................................................................................... 46
5.3.1 Call Record......................................................................................... 46
5.3.2 Alarm Record...................................................................................... 46
5.3.3 Unlock Record .................................................................................... 47
5.4 Status Statistics ............................................................................................ 47
6Functional Operation ................................................................................. 48
6.1 Project Setting............................................................................................... 48
6.1.1 IP Config............................................................................................. 48
6.1.2 Volume Config .................................................................................... 49
6.1.3 Issue Card .......................................................................................... 49
6.1.4 Info...................................................................................................... 51
6.2 Unlock........................................................................................................... 52
6.2.1 Unlock via Fingerprint ......................................................................... 52
6.2.2 Unlock via Password........................................................................... 52
6.2.3 Unlock via Card................................................................................... 52
6.2.4 Unlock via QR Code............................................................................ 52
6.2.5 Unlock via VTH................................................................................... 53
6.3 Call Function................................................................................................. 53
6.3.1 Call MGT Center................................................................................. 53
6.3.2 Call VTH ............................................................................................. 54
6.4 Default .......................................................................................................... 55
Appendix 1 Technical Specifications....................................................................... 56

4
Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or
electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee safety
under load and earthquake. Otherwise, it may cause device to fall off or turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise,
it may cause fire or electric shock.
Privacy Protection Notice
As the device user or data controller, you might collect personal data of others'
such as face, fingerprints, car plate number, Email address, phone number, GPS
and so on. You need to be in compliance with the local privacy protection laws
and regulations to protect the legitimate rights and interests of other people by
implementing measures include but not limited to: providing clear and visible
identification to inform data subject the existence of surveillance area and
providing related contact.
About the Manual
The Manual is for reference only. If there is inconsistency between the
Manual and the actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply
with the Manual.
The Manual would be updated according to the latest laws and regulations
of related regions. For detailed information, see the paper User's Manual,

5
CD-ROM, QR code or our official website. If there is inconsistency between
paper User's Manual and the electronic version, the electronic version shall
prevail.
All the designs and software are subject to change without prior written
notice. The product updates might cause some differences between the
actual product and the Manual. Please contact the customer service for the
latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations
description, or errors in print. If there is any doubt or dispute, please refer to
our final explanation.
Upgrade the reader software or try other mainstream reader software if the
Guide (in PDF format) cannot be opened.
All trademarks, registered trademarks and the company names in the
Manual are the properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is
any problem occurred when using the device.
If there is any uncertainty or controversy, please refer to our final
explanation.

6
1 Product Overview
1.1 Introduction to Product
10-inch touch screen VTOcan connect to VTH, VTS and etc., providing bidirectional video
intercom for visitor and resident, plus password unlock card unlock fingerprint unlock, QR
code unlock and face recognition (expansible).
1.2 Features
10-inch IPS screen
Night vision
Aluminium alloy plate
HD touch screen
Unlock via password, IC card, and remotely unlock
2.0 MP camera, auto BLC, adjustable up/down, wide viewing angle
IP54
Proximity sensor at card area/button area/screen.
Heating inside, allow work environment down to -40℃
Unlock via fingerprint
Expand face recognition.

7
2 Structure
2.1 Front Panel
Figure 2-1 Front Panel
No. Component
Name
Description

8
No. Component
Name
Description
1 Camera Monitor VTO video.
2 Speaker Sound output.
3 Backlight Backlight of camera.
4 Screen 10 inch IPS HD screen
5 Proximity
Sensor
When body or object approaches, the sensor
light is ON.
6 MIC Sound input.
7 Card Area Authorize IC card unlock right （issue card）,
card unlock
8 Fingerprint
Module
Recorded fingerprint can unlock door.
Chart 2-1

9
2.2 Rear Panel
Figure 2-2
No. Component Name Description
1 Camera Adjust Adjust camera.
2 Vandal-proof When VTO is forced to leave wall, it will alarm and send
alarm to MGT center.
3 Network Standard RJ45 Ethernet cable.

10
No. Component Name Description
4 USB Device debugging.
5 Power Input DC 12V power input
6 Analog Signal Analog signal connect to distributor
7 Lock Connect to unlock button and door sensor, control NO/NC
lock ON/OFF, see device rear label for details.
8 Wiegand Port Connect to wiegand device,
see device rear label for
details.
9 Alarm Out Include 2-ch alarm output and 2-ch alarm input, see device
rear label for details.
10 Alarm In
11 RS485 Connect to RS485 device, see device rear label for details.
Chart 2-2

11
3 Networking
Figure 3-1

12
4 Installation and Debug
4.1 Device Wiring
Please see device rear panel.
4.2 Installation
Warning:
Avoid installation in poor environment, such as condensation, high temperature, oil
stain, dust, corrosion or direct sunlight.
Project installation and debugging must be done by professionals. Please do not
open the device in case of failure, and please contact after sales service.
4.2.1Screw
Component Name
Diagram
Quantity
M4×30 cross pan head
machine screw 2
Chart 4-1

13
4.2.2Installation Step
Figure 4-1
Step:
Step 1. On appropriate surface, embed case into wall with cement.
Note:
During installation, the recommended distance from device center to ground is
1.4m~1.6m.
Step 2. Fix VTO front panel on the case with screws.
4.3Device Debug
4.3.1Before Debugging
Debugging personnel shall be familiar with related materials, know device installation,
wiring and usage.
Debugging personnel check whether circuit has short circuit or open circuit or not. Make
sure circuit is normal, plug device to power.

14
After debugging end, clear up site (handle plugs, fix device and etc.)
VTO default IP address is 192.168.1.110. Before you use the VTO, please modify IP
address to be planned IP address, so that VTO and VTH are in the same segment.
Step to debug:
Step 1. Plug device to power.
Step 2. In PC Internet Explorer, enter default device IP address (192.168.1.119).
Step 3. Enter username and password.
Note:
Default username and password are both admin. After first time login, please change
passwordASAP, see Ch 5.2.6.3.
Step 4. Click Login.
Step 5. Modify device IP address to be planned IP address, see Ch 5.2.4.1. After
modification is done, WEB page restarts, go to the new IP address page.
4.3.2Debug Device (VT System)
For example, connect to 10-inch VTH.
Step 1. Plug device to power.
Step 2. In homepage, long click Settings for 6 seconds. Device pops up Password
Verification box.
Step 3. Enter project setup password which is 888888 by default.
Step 4. Click Net Set to connect VTH.
Wireless:
If the VTH supports WI-FI, you can select wireless connection.
1. Select Wireless, open WLAN, view available WI-FI. See Figure 4-2.

15
Figure 4-2
2. Select WI-FI you want to connect, and in pop-up WLAN connection
window, enter WI-FI password.
3. Click OK.
Now device interface shows at the upper-right corner which means wireless
connection is successful.
Wired:
1. Select Wired. See Figure 4-3.

16
Figure 4-3
2. Enter VTH Local IP, Subnet Mask and Gateway.
3. Click OK.
Now device interface shows at the upper right corner which means wired connection
is successful.
Note:
You also can enable DHCP to auto gain VTH IP, subnet mask and gateway and click
OK to complete wired connection.
Step 5. Click Production to config VTH room no.
Warning:
VTH room no. must match VTH short no. on WEB of corresponding VTO.
If you want to set this VTH to be master VTH, then you shall select Master.
Fill in room no., click OK to save, see Figure 4-4.
Figure 4-4
If you want to set this VTH to be extension VTH, then you shall select Extension.
1. Fill in user cinfig info for extension to auto sync with master, such as room
no. and master IP. See Figure 4-5.
Note:
Some extension config will auto sync with master VTH info, and cannot be
modified.

17
Figure 4-5
2. Click OK to save config.
System pops up prompt interface which means config is successful.
Note:
Telnet server is ON, debugging personnel can view VTH config via
telnet+IP.
Step 6. Click Network to config VTO info.
Warning:
Before config, please make sure VTO is plugged to power and is in the same segment
with VTH.
1. Fill in VTO name, master VTO IP address, set enable status to , see Figure
4-6.

18
Figure 4-6
2. Fill in VTO name, and extension VTO IP address, select device type, set enable
status to .
The device supports n19 units of extensions, and you can click to page down
to add more extensions.
4.3.3Successfully Debug
On VTO dial VTO room no. to call VTH. VTH pops up monitoring video and operation
buttons, see Figure 4-7. You can accept call, hang up, snapshot, record, unlock and etc.
on VTH.

19
Figure 4-7
Icon Icon Name Note
Unlock 1
VTO config electric control lock, click
, unlock.
Unlock 2
If this VTO has 485 expansion interface, it
can expand electric control lock or door
sensor lock, after successfully matching
with VTH, click , unlock.
MIC Click , turn off MIC volume.
IP Camera Click ，
select IPC video of
monitoring favorites.
Snapshot
Click ，to snapshot.
Note:
When SD card is not installed, this button is
grey.
Record
Click ，record ；
call ends, click
end recording.
Records are stored to SD card of this VTH,

20
Icon Icon Name Note
if full, it overwrites from the earliest record.
Note:
When SD card is not installed, this button is
grey.
、Volume Adjust call volume.
Accept Call -
Hang up -
Chart 4-2