Dahua KTP03 User manual

Villa Door Station
User’s Manual
V1.0
.1

I
Foreword
General
This manual introduces how to configure the villa door station (hereinafter referred to as "VTO") on
the webpage.
Safety Instructions
The following categorized signal words with defined meaning might appear in the Manual.
Signal Words Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable results.
TIPS Provides methods to help you solve a problem or save time.
NOTE Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Date
V1.0.1 Revised “Important Safeguards and Warnings”. December 2022
V1.0.0 First release. January 2021
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the actual
product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our

II
official website. If there is inconsistency between paper manual and the electronic version, the
electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or errors
in print. If there is any doubt or dispute, we reserve the right of final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the properties
of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurring when using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.

III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, and comply with the
guidelines when using it.
Operation Requirements
●Check whether the power supply is correct before use.
●Do not unplug the power cord on the side of the device while the adapter is powered on.
●Operate the device within the rated range of power input and output.
●Transport, use and store the device under allowed humidity and temperature conditions.
●If the device is powered off for longer than a month, it should be placed in its original package
and sealed. Make sure to keep it away from moisture, and store it under allowed humidity and
temperature conditions.
●Do not drop or splash liquid onto the device, and make sure that there is no object filled with
liquid on the device to prevent liquid from flowing into it.
●Do not disassemble the device without professional instruction.
Installation Requirements
●Do not connect the power adapter to the device while the adapter is powered on.
●Strictly comply with the local electric safety code and standards. Make sure the ambient voltage
is stable and meets the power supply requirements of the device.
●Do not connect the device to two or more kinds of power supplies, to avoid damage to the
device.
●Improper use of the battery might result in a fire or explosion.
●Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.
●Do not place the device in a place exposed to sunlight or near heat sources.
●Keep the device away from dampness, dust, and soot.
●Install the device on a stable surface to prevent it from falling.
●Install the device in a well-ventilated place, and do not block its ventilation.
●Use an adapter or cabinet power supply provided by the manufacturer.
●Use the power cords that are recommended for the region and conform to the rated power
specifications.
●The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the device label.
●The device is a class I electrical appliance. Make sure that the power supply of the device is
connected to a power socket with protective earthing.

IV
Table of Contents
Foreword............................................................................................................................................................ I
Important Safeguards and Warnings............................................................................................................. III
1 Initializing the VTO........................................................................................................................................ 1
2 Login and Resetting Password ..................................................................................................................... 2
Login ............................................................................................................................................................................................... 2
Resetting Password ................................................................................................................................................................... 2
3 Main Interface................................................................................................................................................ 4
4 Local Settings ................................................................................................................................................ 5
Basic ................................................................................................................................................................................................ 5
Video & Audio.............................................................................................................................................................................. 6
Access Control Settings ........................................................................................................................................................... 8
4.3.1 Local................................................................................................................................................................................... 8
4.3.2 RS-485 ............................................................................................................................................................................... 9
4.3.3 Password Management.............................................................................................................................................. 9
System............................................................................................................................................................................................ 9
Security........................................................................................................................................................................................11
Wiegand.......................................................................................................................................................................................12
Onvif User....................................................................................................................................................................................13
Upload File..................................................................................................................................................................................13
5 Household Setting....................................................................................................................................... 15
VTO No. Management ............................................................................................................................................................15
VTH Management....................................................................................................................................................................16
5.2.1 Adding Room Number..............................................................................................................................................16
5.2.2 Issuing Access Card ....................................................................................................................................................17
5.2.3 Issuing Fingerprint .....................................................................................................................................................18
VTS Management.....................................................................................................................................................................19
IPC Setting ..................................................................................................................................................................................20
Status............................................................................................................................................................................................21
Publish Information.................................................................................................................................................................22
5.6.1 Send Info........................................................................................................................................................................22
5.6.2 History Info....................................................................................................................................................................22
6 Network........................................................................................................................................................ 24
Basic ..............................................................................................................................................................................................24
6.1.1 TCP/IP ..............................................................................................................................................................................24
6.1.2 Port...................................................................................................................................................................................24
6.1.3 P2P....................................................................................................................................................................................25
UPnP..............................................................................................................................................................................................25
6.2.1 Enabling UPnP Services............................................................................................................................................25
6.2.2 Adding UPnP Services...............................................................................................................................................25
SIP Server ....................................................................................................................................................................................26
Firewall.........................................................................................................................................................................................27
7 Log Management ........................................................................................................................................ 29
Cybersecurity Recommendations ............................................................................................. 30

1
1Initializing the VTO
For first-time login or after resetting the VTO, you need to initialize it on the webpage.
Power on the VTO.
Go to the default IP address (192.168.1.108) of the VTO.
Make sure that the IP address of your PC is in the same network segment as the VTO.
Device initialization
Enter and confirm the password, and then click Next.
Enter an email address for resetting password.
Click Next, and then click OK.

2
2Login and Resetting Password
Login
Before login, make sure that the PC is in the same network segment as the VTO.
Go to the IP address of the VTO in the browser.
For first-time login, enter the default IP (192.168.1.108). If you have multiple VTOs, we
recommend changing the default IP address (Network > Basic) to avoid conflict.
Enter "admin" as username and the password you set during initialization, and then click
Login.
Login
Resetting Password
On the login page, click Forgot Password?, and then click Next.
Reset the password
Scan the QR code, and then you will get a string of numbers and letters.
Send the string to the email: [e-mail], and then the security code
will be sent to the email address configured during initialization.
Enter the security code in the input box, and then click Next.

3
If you did not set an email address during initialization, contact your supplier or
customer service for help.
The security code will be valid only for 24 hours upon receipt.
If you enter the wrong security code for 5 consecutive times, your account will be
locked for 5 minutes.
Enter and confirm the new password, and then click OK.

4
3Main Interface
Main interface
Table 3-1 Main interface introduction
No. Function Description
1 General function
: Change the password and your email address.
: Go to the main interface.
: Log out, restart the VTO or restore the VTO to factory
settings.
If you restore the VTO to factory settings, all data except external
storage will be deleted. You can format the SD card to delete the
data in it.
2 VTO information View the information of the VTO and the system.
3 System information
4 Configuration
manager Export or import VTO configuration or user information.
5 Function
Configure parameters for different functions.
Interface and function might vary with models. The actual product
shall prevail.

5
4Local Settings
This chapter introduces the detailed configuration of the VTO.
Basic
Select Local Settings > Basic.
Basic
Configure the parameters.
Table 4-1 Basic parameter description
Parameter Description
Device Type Select Villa Station or Small Apartment as needed.
Center Call No. The default phone number for the management center is 888888, and
you can set it to any number with up to 9 digits.
Device Name When other devices are monitoring this VTO, the device name will appear
on the monitoring image.
Calling Center Period Time period in which the management center can be called.
No.
Used to differentiate each VTO, and we recommend setting it according
to unit or building number, and then you can add VTOs to the SIP server
by using their numbers.
You can change the number of the VTO when it is not working as the SIP
server.
Periods in which Calls
can be Made
Configure the time if you only want to receive calls during a specific
period.
Group Call Enable it on the VTO that works as the SIP server, and when a main VTH
receives a call, all extension VTHs will also receive the call.

6
Parameter Description
Total SD Card
Capacity Displays the total and used capacity of the SD card. You can click Format
to delete all the data in the SD card.
SD Used Capacity
Format
Auto Capture
(Unlock)
When the door is unlocked, the VTO will take two snapshots and save
them to the SD card.
Auto Capture (Calling) Take a snapshot and save it in the SD card of the VTO when the VTO is
calling.
Upload Video
Messages
When enabled:
If an SD card is inserted in both the VTH and VTO, the video message
will be saved both in the SD cards of the VTH and the VTO.
If an SD card is only inserted in the VTH or the VTO, the video
message will be saved only in the SD card of the VTH or the VTO.
If no SD card is inserted in the VTH or VTO, no video message will be
saved.
Auto Recording (Call) Take recording when the VTO is in a call, and save the recording in the SD
card of the VTO.
Click Save.
Video & Audio
Configure the video format and quality, and audio of the VTO.
Select Local Settings > Video & Audio.
Video and audio
Configure the parameters, which will take effect upon change.

7
Table 4-2 Video parameter description
Parameter Description
Main/Sub
Stream
Video
Format
Select different resolution as needed:
1080P: 1920 × 1080.
720P: 1280 × 720.
WVGA: 800 × 480.
QVGA: 320 × 240.
D1: 720 × 480.
CIF: 352 × 288.
Frame Rate The larger the value, the smoother the video, but it requires more
bandwidth.
Bitrate Rate The larger the value, the better the video quality, but it requires more
bandwidth.
Status
Scene Mode Select as needed according to the lighting condition. Auto is selected
by default.
Compensati
on Mode
BLC: Back light compensation. Improve the clarity of the target in
the image.
WDR: Wide dynamic range. Enhance the brightness of dark areas,
and reduce the brightness of bright areas to improve the image.
HLC: High light compensation.
Reduce the brightness of the
strong spots to improve the overall image.
Video
Standard
Select PAL or NTSC according to your area.
PAL is mostly used in China and Europe, and NTSC primarily in the
United States and Japan.
Image
Brightness The larger the value, the brighter the image.
Contrast Larger value for more contrast between bright and dark areas.
Hue Make the color brighter or darker. The default value is made by the
light sensor, and we recommend keeping it default.
Saturation The larger the value, the thicker the color.
Gamma Changes the picture brightness and improves the picture dynamic
range in a non-linear way. The larger the value, the brighter the image.
Gain
Adjustment
Amplify the video signal to increase image brightness. If the value is
too large, there will be more noise in the image.
Mirror Display the image with left and right side reversed.
Flip Display the image upside down.
Display Time Display the current time and date on the video image.
Audio
Control — Turn on or off each type of sound.
Volume
Control
Microphone
Volume Adjust the volume as needed.
Speaker
Volume

8
Access Control Settings
This section introduces how to configure the two locks connected to the lock port or the RS-485 port
of the VTO.
4.3.1 Local
Select Local Settings > Access Control Settings.
Local
Configure the parameters.
Table 4-3 Local access control parameter description
Parameter Description
Unlock
Responding
Interval
The door can only be unlocked again after the interval.
Unlock Period The time during which the lock stays unlocked.
Door Sensor
Check Duration
Enable it, and the door will not be locked until the door sensors contact
each other. If the door is unlocked longer than the Door Sensor Check
Duration, the door sensor alarm will be triggered, and the alarm will be
sent to the management center.
Disable it, and then the door will be locked after the Unlock Period.
You need to install a door contact to configure this parameter.
First/Second
Unlock Command
You can connect a third-party phone, such as a SIP phone, to the VTO, and
use the command to open the door remotely.
Door Contact
Type
NC: Normally closed.
NO: Normally open.
Door Sensor
Enable Synchronize door sensor status to indoor monitors (VTHs).
Fire Alarm If turned on, you can connect an alarm device to the port that is originally for
the door contact, but you cannot use the door contact function.
Lock Non-remote methods, such as password or card, will unlock the lock you

9
Parameter Description
select.
IC Card Encrypt Access cards issued by the VTO will be encrypted and unclonable.
Click Save.
4.3.2 RS-485
Select Local Settings > Access Control Settings, and then configure the parameters of the lock
connected through the RS-485 port. See Table 4-3 for parameter description.
Lock connected through the RS-485 port
4.3.3 Password Management
Add a username and password used to unlock the door.
Password management
System
Configure time parameters, NTP server, and more.

10
Select Local Settings > System.
System
Configure the parameters.
Table 4-4 System parameter description
Parameter Description
Date Format Select a format as needed.
Time Format
System Time
Changing system time might cause problems on video searching and information
publication. Turn off video recording and auto snapshot before changing it.
Time Zone Configure the time zone as needed.
Sync with PC Synchronize the VTO system time with your PC.
DST Daylight saving time. If it is applicable to your area, you need to enable it, and
then configure DST type, start time and end time.
DST Type Select Date or Week as needed, and then configure the specific period.
Start Time Configure the start time and end time of DST.
End Time
NTP Enable Enable NTP and enter the IP address of the NTP server, and then the VTO will
syncronize time with the NTP server automatically.
NTP Server
Port NTP server port number.
Interval VTO time update cycle. 30 minutes at most.
Maintenance Define the time when the VTO will restrart automatically.
SSH
You can connect debugging devices to the VTO through SSH protocol.
We recommend turning it off, and turn on security mode and outbound service
information protection. See "4.5 Security". Otherwise, the VTO might be exposed
to security risks and data leakage.
Emergency
Maintenance
Enable it for fault analysis and repair.

11
Parameter Description
This function will occupy 8088 and 8087 ports.
Click Save.
Security
Configure functions that involve device security.
Select Local Settings > Security.
Security
Configure the parameters.
Table 4-5 Security parameter description
Parameter Description
CGI Enable
Enable the use of CGI command.
We recommend turning it off. Otherwise, the VTO might be exposed to
security risks and data leakage.
Mobile Push
Notification
Send information to the app on the smartphone.
We recommend turning it off if you do not need this function. Otherwise,
the VTO might be exposed to security risks and data leakage.
Password Reset If turned off, you will not be able to reset password.
Audio/Video
Transmission
Encryption
Encrypt all data during voice or video call.
We recommend turning it on. Otherwise, the VTO might be exposed to
security risks and data leakage.
ONVIF On Allow third-party to pull video stream of the VTO through the ONVIF
protocol.

12
Parameter Description
We recommend turning it off. Otherwise, the VTO might be exposed to
security risks and data leakage.
RTSP Over TSL
Output encrypted bit stream through RTSP.
We recommend turning it on. Otherwise, the VTO might be exposed to
security risks and data leakage.
Outbound Service
Information
Protection
Protect your passwords.
We recommend turning it on. Otherwise, the VTO might be exposed to
security risks and data leakage.
Multicast/Broadcast
Search
Enable it and the VTO will be found by other devices.
We recommend turning it off. Otherwise, the VTO might be exposed to
security risks and data leakage.
Authentication
Mode
Security Mode (recommended):
Support logging in with Digest
authentication.
Compatible Mode: Use the old login method.
We recommend the security mode. Compatible mode might expose the
VTO to security risks and data leakage.
Click Save.
Wiegand
Configure the parameters as needed when connected to other devices, such as a card reader with a
Wiegand port.

13
Wiegand
Onvif User
Add accounts for devices to monitor the VTO through the ONVIF protocol.
If you delete an account, it cannot be undone.
Select Local Settings > Onvif User.
Click Add.
Add an ONVIF user
Enter the information, and then click Save.
ONVIF devices can now monitor the VTO by using the account. See the user’s manual of the
ONVIF device for details.
Upload File
Upload audio file to change the sound when calling, unlocking the door, and more.
Select Local Settings > Upload File.

14
Select an audio type, and then click Browse to select the audio file as needed.
Change the sound prompt
Click Upload.

15
5Household Setting
This chapter introduces how to add, modify, and delete VTO, VTH, VTS, and IPC, and how to send
messages from the SIP server to VTOs and VTHs when the VTO works as the SIP server. If you are
using other servers as the SIP server, see the corresponding manual for details.
To configure SIP server parameters, see "6.3 SIP Server" for details.
VTO No. Management
You can add VTOs to the SIP server, and all the VTOs connected to the same SIP server can call each
other.
Log in to the webpage of the VTO working as the SIP server, and then select Household
Setting > VTO No. Management.
VTO management
Click Add.
Add VTO