Dahua OTS102R-C User manual

Transmission Function Card User’s Manual
V1.1.0

i
Welcome
Thank you for purchasing our Transmission Function Card.
This user’s manual is designed to be a reference tool for the installation and operation of your system.
Here you can find information about features and functions .
Important Safeguards and Warnings
Before installation and operation please read following safeguards and warnings carefully in order to
avoid damages and losses.
Note
Please install the device to transportation, use or storage under the allowed temperature and
humidity conditions.
●Do not install the device at position exposed to sunlight or in high temperature to avoid the
device causing fire.
Do not expose the device to lampblack, steam or dust.
Do not block air vent of the device or ventilation around the device. Otherwise, temperature in
device will rise and may cause fire.
The device must be installed on solid and flat surface in order to guarantee safety under load
and earthquake. Otherwise, it may cause device to fall off or turnover.
Do not expose the device to humid environment.
Do not place any object on the device.
●Do not disassemble the device without professional instruction.
Warning
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise, it may
cause fire or electric shock.
Special Announcement
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website for more information.

ii
Table of Contents
1Product Overview.........................................................................................................- 1 -
1.1 Product Introduction..................................................................................... - 1 -
1.2 Features ......................................................................................................... - 1 -
1.2.1 Single channel HDSDI Function Card..........................................................................- 1 -
1.2.2 CVI Converter Function Card.........................................................................................- 2 -
1.2.3 Single-Channel HDCVI Function Card.........................................................................- 3 -
1.2.4 2-Ch HDCVI Function Card.............................................................................................- 4 -
2Installation Guide.........................................................................................................- 6 -
Appendix 1 Technical Specifications............................................................................- 7 -
Appendix 2 Toxic or Hazardous Materials or Elements ...........................................- 8 -

- 1 -
1 Product Overview
1.1 Product Introduction
Please refer to Sheet 1-1 for more details about transmission function card series.
SN
Model
Name
Function
Note
1
OTS102R-C
Single channel
HDSDI function
card
Support 1-channel HDSDI video
output,1-channel HDSDI video loop output.
Optional
2
TP2105-C
CVI converter
function card
Support 1-channel HDCVI input, 2-channel
HDCVI, 1-channel HDMI and 1-channel
CVBS output.
Optional
3
DH-OTC102R-C
Single channel
HDCVI function
card
Support 2 sets of independent single
channel HDCVI output. Each set supports
1-ch HDCVI video output, 1-ch HDCVI video
loop output.
Optional
4
DH-OTC202R-C
2-ch HDCVI
function card
Support 2-ch HDCVI video output, 2-ch
HDCVIvideo loop output.
Optional
Sheet 1-1
1.2 Features
1.2.1 Single channel HDSDI Function Card
1.2.1.1 Function and Features
Support 1-channel HDSDI video output, 1-channel HDSDI video loop output.1
Lossless, non-compression, real-time transmission.
Working temperature:﹣10℃-55℃.
Plug and play, easy installation and operation.
4 LED lights indicate working status.
1.2.1.2 Framework
Refer to Figure 1-1 for more details about the framework of single channel HDSDI standard Function

- 2 -
Card.
Figure 1-1
Refer to Sheet 1-2 for more details about ports.
Port
Note
OUT
Video output port
OUTˊ
Video loop output port
OPT
Fiber input port
RS485
RS485 control data
Sheet 1-2
Refer to Sheet 1-3 for more details about indicators.
Indicator
Note
Color
Device Status
LOS
Optical link indicator
Green
Optical link normal
DATA
RS485 data transmission
indicator
Green light flashing
Transmitting data
PWR
Power status indicator
Green
Power connection normal
VIDEO
Video source indicator
Green
Video access normal
Sheet 1-3
1.2.2 CVI Converter Function Card
1.2.2.1 Function and Features
Support 1-channel HDCVI input, 2-channel HDCVI, 1-channel HDMI, 1-channel CVBS output.
Note:
HDMI port：
When input CVI video format is 720P, output is 720P/60.
When input CVI video format is 1080P, output is 1080P/60.
CVBS port：
When input CVI is 25 frames, 50 frames, output is PAL.
When input CVI is 30 frames, 60 frames, output is NTSC.
Fixed aspect ratio, output as 4:3.
Lossless, real time, non-compression.
Working temperature：﹣10℃-55℃。
LED status indicator displays the working status of video converter.

- 3 -
1.2.2.2 Framework
Refer to Figure 1-2 for more details about the framework of CVI converter function card.
Figure 1-2
Refer to Sheet 1-4 for more details about ports.
Port
Note
IN
HDCVI video input port
OUT1
HDCVI video output port
OUT1ˊ
HDCVI video loop output port
CVBS
CVBS video output port
HDMI
HDMI video output port
RS485
RS485 control data
Sheet 1-4
Refer to Sheet 1-5 for more details about indicators.
Sheet 1-5
1.2.3 Single-Channel HDCVI Function Card.
1.2.3.1 Functions and Features
Support 2 sets of independent single-channel HDCVI output. Each set supports 1-ch HDCVI video
output, 1-ch HDCVI video loop output.
Support lossless non-compression real-time transmission.
Working temperature: ﹣10℃-55℃.
Plug and play, easy installation.
7 LED lights indicate working status.
1.2.3.2 Framework
Please refer to Figure 1-3 for more details.
Indicator
Note
Color
Device Status
DATA
RS485 data transmission
indicator
Green light flashing
Transmitting RS485 data
VIDEO
BNC video output indicator
Green
Video access normal
PWR
Power status indicator
Green
Power connection normal

- 4 -
Figure 1-3
Refer to Sheet 1-6 for more details about ports; see Sheet 1-7 for more details about indicators.
Sheet 1-6
Indicator
Note
Color
Device Status
LOS1/LOS2
Optical link indicator
Green
Optical link normal
V1/V2
Video source
indicator
Green
Video access normal
DATA1/DATA2
RS485 data
transmission
indicator
Green light flashing
Transmitting data
PWR
Power status
indicator
Green
Power connection normal
Sheet 1-7
1.2.4 2-Ch HDCVI Function Card
1.2.4.1 Functions and Features
Support 2–ch HDCVI video output, 2-ch HDCVI video loop output.
Support lossless non-compression real-time transmission.
Working temperature: ﹣10℃-55℃.
Plug and play, easy installation.
5 LED lights indicate working status.
1.2.4.2 Framework
Please refer to Figure 1-4 for more details.
Port
Note
OUT1/OUT2
HDCVI video output port
OUT1ˊ/OUT2ˊ
HDCVI video loop output port
OPT1/OPT2
Optical fiber input port

- 5 -
Figure 1-4
Please refer to Figure 1-8 for more details about ports; see Figure 1-9 for more details about indicator.
Port
Note
OUT1/OUT2
HDCVI video output port
OUT1ˊ/OUT2ˊ
HDCVI video loop output port
OPT
Optical fiber input port
RS485
RS485 control data
Sheet 1-8
Indicator
Note
Color
Device Status
VIDEO1/VIDEO2
Video source
indicator
Green
Video access normal
LOS
Optical link
indicator
Green
Optical link normal
DATA
RS485 data
transmission
indicator
Green light flashing
Transmitting data
PWR
Power status
indicator
Green
Power connection normal
Sheet 1-9

- 6 -
2 Installation Guide
This chapter will introduce how to install function cards into 2U frame, which supports 8 function cards
which are divided into two rows, and each row is equipped with 4 tracks.
Installation Steps:
Step 1: Make the function card align at left and right track horizontally and push it into the frame until the
end.
Step 2: Secure two fixed screws on the left and right.
Refer to Figure 2-1 for more details.
Figure 2-1

- 7 -
Appendix 1 Technical Specifications
Product Model
OTS102R-C
TP2105-C
OTC102R-C
OTC202R-C
Physical Port
1*HDSDI output,
1*HDSDI loop
output 1*RS485,
1*FC port
1*HDCVI input,
2*HDCVI output,
1*HDMI, 1*CVBS
output, 1*RS485
2*HDCVI output,
2*HDCVI loop
output, 2*FC port
2*HDCVI output,
2*HDCVI loop
output, 1*RS485,
1*FC port
Indicator
Power, data,
optical link, video
source indicator
Power, data,
video source
indicator
Power, data,
optical link, video
source indicator
Power, data,
optical link, video
source indicator
Power
Frame centralized
power supply
Frame
centralized
power supply
Frame
centralized
power supply
Frame
centralized
power supply
Power Consumption
≤5W
≤5W
≤5W
≤5W
Temperature
﹣10℃-55℃
﹣10℃-55℃
﹣10℃-55℃
﹣10℃-55℃
Device Weight
0.25Kg
0.25Kg
0.25Kg
0.25Kg
Dimension
251.30*152*20.1
（mm）
251.30*152*20.1
（mm）
251.30*152*20.1
（mm）
251.30*152*20.1
（mm）

- 8 -
Appendix 2 Toxic or Hazardous Materials or Elements
Component
Name
Toxic or Hazardous Materials or Elements
Pb
Hg
Cd
Cr VI
PBB
PBDE
Circuit Board
Component
○
○
○
○
○
○
Device Case
○
○
○
○
○
○
Wire and Cable
○
○
○
○
○
○
Packing
Components
○
○
○
○
○
○
Accessories
○
○
○
○
○
○
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the
parts is below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the
environmental-friendly use period (EFUP) period, the toxic or hazardous substance or elements
contained in products will not leak or mutate so that the use of these (substances or elements) will
not result in any severe environmental pollution, any bodily injury or damage to any assets. The
consumer is not authorized to process such kind of substances or elements, please return to the
corresponding local authorities to process according to your local government statute.

- 9 -
Note
This user’s manual is for reference only.
Slight difference may be found in user interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website for more information.
