Dahua F Series User manual

Dahua Bullet Wi-Fi Camera Quick Start Guide
Dahua Bullet Wi-Fi Camera
Quick Start Guide
USA Version 1.0.0
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Dahua Bullet Wi-Fi Camera Quick Start Guide
2
1 Packing List
Device ×1
QSG ×1Screw Package ×1
Waterproof Connector ×1

Dahua Bullet Wi-Fi Camera Quick Start Guide
3
2 Product Appearance
Please refer to the following table for more details about each port.
SN
Name
①
Ethernet port
②
Power port
③
Unit device
Table 2-1

Dahua Bullet Wi-Fi Camera Quick Start Guide
4
Please refer to the following table for more details about each component.
Table 2-2
Note
For reset, long press for 8 seconds and then the light off; For WPS (Wi-Fi Protected
Setup), one quick press.
SN Name
①Reset/ WPS (Wi-Fi Protected Setup) button
②Indicator light 1
③Lower cover
④Micro SD card slot
⑤Indicator light 2
⑥Waterproof ring
⑦Wi-Fi antenna
⑧Locking screw

Dahua Bullet Wi-Fi Camera Quick Start Guide
5
Please refer to the following table for more details about status of indicator light.
Indicator light status
Device status
Red light stably on
Booting
Green light slow flashing
Booting completed, await Wi-Fi config,
enter smart config status;
Green light quick flashing Wi-Fi smart config in progress, including WPS (Wi-Fi Protected Setup),
management frame, etc.
Green light stably on
Wi-Fi connection succeeded, operate
normally.
Red and green lights flash alternately
Device upgrade
Red light slow flashing
Network disconnection.
Red light quick flashing
Device fail to boot up; alarm or SD card
does not work
Table 2-3

Dahua Bullet Wi-Fi Camera Quick Start Guide
6
3 Operation by DMSS App
Note:
This camera only support 2.4G frequency range, please choose correct frequency
range on your Wi-Fi router.
Step 1 Power on your camera with power adapter.
Step 2 Connect your smartphone to your Wi-Fi network, search “iDMss” on Apple
Store or “gDMSS” on Google Play, download and install the application.
Step 3 OpenAPP (take iOS version as an example), see Figure 3-1.
Step 4 Tap “CAMERA”icon after you login your account. Then tap “+” to add
new devices. See Figure 3-2.
Figure 3-1 Figure 3-2

Dahua Bullet Wi-Fi Camera Quick Start Guide
7
Note
：
When using a Dahua device for the first time, user is required to set a login
password for the admin account (system default user). The function is Device
initialization onAPP.
If you have initialized your device on other platform, choose other connection type
to add the camera.
WiFi config for initialized WiFi Device refer to the Step 6 and Step 7.
Step 5 Tap “Device Initialization” at the bottom of the screen. Choose your
device’s connection type. We only take “WiFi Connection” as an example.
Figure 3-3

Dahua Bullet Wi-Fi Camera Quick Start Guide
8
Step 6 Scan the QR code on the back of the camera to get the SN, you can also
tap "Manually enter the SN" and manually input the SN number on the
next page. Then tap "Next".
Figure 3-4
Step 7 Make sure your smartphone is connected to the same Wi-Fi. Fill in the
password of your Wi-Fi, then tap "Next".
Figure 3-5

Dahua Bullet Wi-Fi Camera Quick Start Guide
9
Step 8 Set up an account password and security email address that use for reset
password for your camera, then tap "OK". Check cloud update config, then
tap “OK”.
Figure 3-6
Now, you camera have completed the initialization and connected to WiFi Router.
Next step is add the initialized device to DMSS.

Dahua Bullet Wi-Fi Camera Quick Start Guide
10
Step 9 Back to “Add Device” page, tap the second option to Add Device.
Step 10 Input device name and password, your camera is successfully added. You
can start live preview now.
Figure 3-7
Note
If you have more cameras, please follow step 4-10 to add them one by one.
If you want to change the Wi-Fi signal, please reset the camera to factory default
and repeat step 4-10 to add the device

Dahua Bullet Wi-Fi Camera Quick Start Guide
11
4 Device Installation
Note
Please make sure the installation surface can min support the 3X weight of the camera
and the bracket.
Step 1 Dig holes on the installation surface (wall or ceiling).
Step 2 Open accessories bag, take out expansion bolt and insert it into the hole
you just dug.
Step 3 Open accessories bag, take out installation screws. Tighten the screws to
fix the device on the installation surface (wall or ceiling). You can move
device sunshade back and forth. When you have fixed the device, you
must tighten screws on sunshade.
Step 4 Plug external wiring of the device properly.

Dahua Bullet Wi-Fi Camera Quick Start Guide
12
Step 5 Use cross screwdriver (in accessories bag) to loosen adjusting screw.
Step 6 Adjust the device in all possible directions, and set its monitoring direction
according to the requirements.
Step 7 Use cross screwdriver to tighten the adjusting screws.
Disclaimer
This quick start guide is for reference only. Minor difference might be found in user
interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
Please visit our website or contact your local service engineer for more information.
If there is any uncertainty or controversy, please refer to our final explanation.
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China
Postcode: 310053
Tel: [phone]
Fax: [phone]
Email:[e-mail]
Website: www.dahuaconsumer.com