Dahua PFS3106-4P-60 User manual

4/8-Port PoE Switch User’s Manual
V1.0.0

Important Sa eguards and Warnings
Attention:
Please read the following safeguards and warnings carefully before using the product in order to avoid
damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or electric
shock.
Do not install the device at position exposed to sunlight or in high temperature. emperature rise in
device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
he device must be installed on solid and flat surface in order to guarantee safety under load and
earthquake. Otherwise, it may cause device to fall off or turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise, temperature in
device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise, it may cause
fire or electric shock.
Special Announcement:
his manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website for more information.
Applicable Models:
he manual can be applied to the following models:
PFS3106-4P-60, PFS3110-8P-96

Table o Contents
Important Safeguards and Warnings........................................................................................2
Table of Contents.........................................................................................................................3
1Product Overview......................................................................................................................
1.1Features........................................................................................................................................................4
1.2Typical Application .....................................................................................................................................4
2Device Structure........................................................................................................................6
2.14-Port PoE Switch........................................................................................................................................6
2.28-Port PoE Switch......................................................................................................................................10
3Installation Guide....................................................................................................................13
Appendix 1 Technical Specification.........................................................................................1

1Product Overview
1.1 Features
Common Features:
wo-layer industrial POE switch.
Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards.
MAC auto study and aging, MAC address list capacity is 8K.
All ports self-adapt MDI/MDIX mode.
All the10/100M self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power
supply.
Industrial wide temperature design.
Adopt metal structure.
Support DC 53V power supply.
Individual Features:
4-port PoE switch 1 100/1000M self-adaptive SFP fiber port, 1 10/100/1000M self-adaptive
RJ45 port and 4 10/100M self-adaptive RJ 45 ports.
4-port PoE switch with 60W power adapter.
8-port PoE switch supports 1 1000M SFP fiber port, 1 10/100/1000M self-adaptive RJ45 port
and 8 10/100M self-adaptive RJ 45 ports.
8-port PoE switch with 96W power adapter.
1.2 Typical Application
he typical application of the device is shown in Figure 1- 1
4

Figure 1- 1
5

1 产品简介
错误！未知的文档属性名称错误！未知的文档属性名称
2Device Structure
2.1 4-Port PoE Switch
Front Panel
he front panel is shown in Figure 2-1.
6

Figure 2-1
SN Name Note
1 10/100 Base- 4 10/100M self-adaptive PoE power supply ports.
2 10/100/1000 Base- 10/100/1000M self-adaptive RJ45 port.
3 100/1000 Base-X 100/1000M self-adaptive SFP fiber port.

1 产品简介
错误！未知的文档属性名称错误！未知的文档属性名称
SN Name Note
4 Link/Act Fiber port status indicator
5 PWR Power indicator
Sheet 2-1
Upper Cover
he device power port is shown in Figure 2-2, support DC53V power supply.
Figure 2-2
8

PoE Power Supply
4 10/100M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply.
Support 4 10/100M RJ45 Ports IEEE802.3af standard power supply simultaneously.
Support 2 10/100M RJ45 ports IEEE802.3at standard power supply simultaneously.
9

1 产品简介
错误！未知的文档属性名称错误！未知的文档属性名称
2.2 8-Port PoE Switch
Front Panel
Figure 2-3
SN Name Note
1 10/100 Base- 8 10/100M self-adaptive RJ45 ports, which are used for PoE
power supply.
2 10/100/1000 Base- 10/100/1000M self-adaptive RJ45 port.
3 1000 Base-X 1000M self-adaptive SFP fiber port.
10