Dahua VTNS1006A-2 User manual

2-Wire Switch User’s Manual
V1.0.0

i
Table of Contents
1 Product Overview..................................................................................................................................1
1.1 Description ................................................................................................................................1
1.2 Application Scene ......................................................................................................................1
2 Device Structure....................................................................................................................................2
2.1 Front ..........................................................................................................................................2
2.2 Rear ...........................................................................................................................................3
3 Installation.............................................................................................................................................5
3.1 Installation via Screw.................................................................................................................5
3.2 Installation via Slide Way...........................................................................................................5
4 Notice ....................................................................................................................................................8
Appendix 1 Technical Specifications..............................................................................................................9

ii
Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in order to
avoid damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or
electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee safety under
load and earthquake. Otherwise, it may cause device to fall off or turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise, it
may cause fire or electric shock.
Special Announcement
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.


1
1 Product Overview
1.1Description
This product provides six pairs of 2-wire ports, supporting 30 levels of product cascading up to
180 devices. It solves apartment digitalization problem. When 2-wire VTH connects to the
network via this product, it can achieve video talk, unlock, monitor and etc.
1.2Application Scene
2-wire switch networking is in Figure 1-1.
Figure 1-1

2
2 Device Structure
2.1Front
Device front structure is in Figure 2-1 and see Chart 2-1.
Figure 2-1
No.
Component Name
Note

3
No.
Component Name
Note
1
Indicator
From left to right：
POWER indicator（1）
Red light on, power normal.
Light off, device power off.
RUN indicator（1）
Green light on, means switch operation normal.
Light NO or OFF, means witch abnormal.
Status indicator connecting VTH（6）
Green light flash ，connected VTH network
normal.
Light NO or OFF, means connected switch
abnormal or VTH network abnormal.
Switch upper IN indicator（1）
Green light flash, means upper switch
connected.
Light NO or OFF, means connected upper switch
abnormal.
Switch lower port OUT indicator（1）
Green light flash, means connected lower
switch.
Light NO or OFF, means connected lower switch
abnormal.
2
Upper Port IN
Switch cascade upper port.
3
Lower Port OUT
Switch cascade lower port.
4
Network Port
To guarantee best network connection, when multi
switch cascade, you just need to connect level 1 switch
network.
5
OFF/ON
Power switch.
6
DC IN Power Plug
DC 24V power input.
7
VTH Port 1～6
Connect digital VTH （6）.
Chart 2-1
2.2Rear
Device rear structure is in Figure 2-2 and see Chart 2-2.

4
Figure 2-2
No.
Component Name
Note
1
Screw hole×4
Via 4_ST4×25-SUS screw install the switch, see Ch 3.1.
2
Slide way
Via slide way install the switch, see Ch 3.2.
Chart 2-2

5
3 Installation
Switch installation includes desktop, wall mount (wither via screw or slide way).
3.1Installation via Screw
Place the device on an appropriate place; install it on wall, fixed via screw. See Figure 3-1.
Figure 3-1
3.2Installation via Slide Way
Warning:
Slide way shall be prepared by user (standard 35mm-wide slide way), not included in device
accessories.
Step 1. Please remove position 1 at rear of switch, and install slide way at position 2, see Figure
3-2.

6
Figure 3-2
Figure 3-3
Step 2. Install slide way on wall at appropriate position.
Step 3. Slide switch against the wall into slide way, and installation complete, see Figure 3-4.

7
Figure 3-4

8
4 Notice
Please use our standard power supply, do not self-powered.
Before wiring, please read carefully the device structure, understand interface, please see
Ch 2.
Before power is turned on, make sure that all connections comply with wiring instructions.
During running the normal working status: POWER LED red light; RUN indicator, green light
flashes.
Before plugging/unplugging power, you must make sure that the power switch is at the OFF
position, and then plug the power.
To ensure the best effect of network transmission, multi-level cascading switch, simply plug
in the first stage switch network cable.
To prevent damage to the equipment, do not place switch in stack.

9
Appendix 1 Technical Specifications
Note:
This manual is for reference only. Slight difference may be found in the user interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local retailer for more information.
Model
VTNS1060A-2
Input
1-ch（Ethernet, 2-wire port alternative）
Output
1-ch
VTH Port
6-ch
Power
24V
Power Consumption
Rated 80W
Work Temperature
-10℃～+55℃
Dimensions(L×W×H）
Without bracket: 178mm×84.5mm×30mm
With bracket: 178mm×106mm×32mm
Weight
230g