Dahua PFS3006-4ET-36 User manual

User’s Manual
I
6-Port Fast Ethernet Switch with
4-Port PoE
User’s Manual
V1.0.0
V1.0.0
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

User’s Manual
I
Foreword
General
This manual introduces the features and structure of 6-Port Fast Ethernet Switch with 4-Port
PoE (hereinafter referred to as "the Device").
Models
DH-PFS3006-4ET-36
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words
Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result
in death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or unpredictable
result.
TIPS
Provides methods to help you solve a problem or save you time.
NOTE
Provides additional information as the emphasis and supplement
to the text.
Revision History
Version
Revision Content
Release Time
V1.0.0
First release.
March 2020
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the
actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our
official website. If there is inconsistency between paper manual and the electronic version,

User’s Manual
II
the electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, we reserve the right of final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurring when using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.

User’s Manual
III
Important Safeguards and Warnings
The manual helps you to use our product properly. To avoid danger and property damage, read
the manual carefully before using the product, and we highly recommend you to keep it well for
future reference.
Operating Requirements
Do not expose the device directly to the sunlight, and keep it away from heat.
Do not install the device in the damp environment, and avoid dust and soot.
Make sure the device is in horizontal installation, and install the device on solid and flat
surface to avoid falling down.
Avoid liquid spattering on the device. Do not place object full of liquid on the device to
avoid liquid flowing into the device.
Install the device in the well-ventilated environment. Do not block the air vent of the device.
Use the device at rated input and output voltage.
Do not dissemble the device without professional instruction.
Transport, use, and store the device in allowed ranges of humidity and temperature.
Power Supply Requirements
Use the battery properly to avoid fire, explosion, and other dangers.
Replace the battery with battery of the same type.
Use locally recommended power cord in the limit of rated specifications.
Use the standard power adapter. We will assume no responsibility for any problems
caused by nonstandard power adapter.
The power supply shall meet the SELV requirement. Use the power supply that conforms
to Limited Power Source, according to IEC60950-1. Refer to the device label.
Adopt GND protection for I-type device.
The coupler is the disconnecting apparatus. Keep it at the angle for easy to operate.

User’s Manual
IV
Table of Contents
Foreword.................................................................................................................................................... I
Important Safeguards and Warnings.................................................................................................... III
1 Product Overview.................................................................................................................................. 1
Introduction ................................................................................................................................... 11.1 Features........................................................................................................................................ 11.2 Typical Application......................................................................................................................... 11.3
2 Device Structure.................................................................................................................................... 2
Side Panel..................................................................................................................................... 22.1 Front Panel.................................................................................................................................... 2
2.2 PoE Power Supply........................................................................................................................ 22.3 Cybersecurity Recommendations ..................................................................................... 4Appendix 1

User’s Manual
1
1 Product Overview
Introduction1.1
6-Port Fast Ethernet Switch with 4-Port PoE is a type of layer 2 commercial switch, which
supports Ethernet power supply. It provides four 10/100 Mbps Ethernet ports and two 100 Mbps
uplink ports.
Features1.2
Layer 2 commercial switch.
Supports IEEE802.3, IEEE802.3u and IEEE802.3x standards.
MAC auto study and aging, MAC address capacity is 2K.
Supports MDI/MDIX self-adaptation.
RJ45 port supports 10/100 Mbps self-adaptation, and supports IEEE802.3af and
IEEE802.3at power supply standards.
Adopts metal enclosure.
Supports 100V-240VAC power supply.
Typical Application1.3
Typical networking sceneFigure 1-1

User’s Manual
2
2 Device Structure
Front Panel2.1
Front panelFigure 2-1
Table 2-1 Description of front panel
SN
Name
Description
1
Uplink1–Uplink2
10/100 Base-T, two 10/100 Mbps self-adaptive uplink ports.
2
PoE1–PoE4
10/100 Base-T, four 10/100 Mbps self-adaptive PoE power
supply ports.
3
PD Alive
When PD Alive is on, IPC can be kept alive.
4
Extend Mode
In extend mode, data can be transmitted up to 250 m in CAT6
cable with a bandwidth of 10 M.
5
Link/Act
Single port Link status indicator.
6
PoE
Single port PoE status indicator.
7
Act
Data transmission status indicator of uplink port.
8
Link
Link status indicator of uplink port.
9
PWR
Power indicator.
Rear Panel2.2
Rear panelFigure 2-2
Table 2-2 Description of rear panel
Name
Description
PWR
Power port. Supports 100V-240V AC power input.
GND.
The switch lock.

User’s Manual
3
PoE Power Supply2.3
Four 100M RJ45 ports support IEEE802.3af and IEEE802.3at standard power supply.

User’s Manual
4
Cybersecurity RecommendationsAppendix 1
Cybersecurity is more than just a buzzword: it’s something that pertains to every device that is
connected to the internet. IP video surveillance is not immune to cyber risks, but taking basic
steps toward protecting and strengthening networks and networked appliances will make them
less susceptible to attacks. Below are some tips and recommendations on how to create a
more secured security system.
Mandatory actions to be taken for basic equipment network security:
1. Use Strong Passwords
Please refer to the following suggestions to set passwords:
The length should not be less than 8 characters;
Include at least two types of characters; character types include upper and lower case
letters, numbers and symbols;
Do not contain the account name or the account name in reverse order;
Do not use continuous characters, such as 123, abc, etc.;
Do not use overlapped characters, such as 111, aaa, etc.;
2. Update Firmware and Client Software in Time
According to the standard procedure in Tech-industry, we recommend to keep your
equipment (such as NVR, DVR, IP camera, etc.) firmware up-to-date to ensure the
system is equipped with the latest security patches and fixes. When the equipment is
connected to the public network, it is recommended to enable the “auto-check for
updates” function to obtain timely information of firmware updates released by the
manufacturer.
We suggest that you download and use the latest version of client software.
"Nice to have" recommendations to improve your equipment network security:
1. Physical Protection
We suggest that you perform physical protection to equipment, especially storage devices.
For example, place the equipment in a special computer room and cabinet, and implement
well-done access control permission and key management to prevent unauthorized
personnel from carrying out physical contacts such as damaging hardware, unauthorized
connection of removable equipment (such as USB flash disk, serial port), etc.
2. Change Passwords Regularly
We suggest that you change passwords regularly to reduce the risk of being guessed or
cracked.
3. Set and Update Passwords Reset Information Timely
The equipment supports password reset function. Please set up related information for
password reset in time, including the end user’s mailbox and password protection
questions. If the information changes, please modify it in time. When setting password
protection questions, it is suggested not to use those that can be easily guessed.
4. Enable Account Lock
The account lock feature is enabled by default, and we recommend you to keep it on to
guarantee the account security. If an attacker attempts to log in with the wrong password
several times, the corresponding account and the source IP address will be locked.

User’s Manual
5
5. Change Default HTTP and Other Service Ports
We suggest you to change default HTTP and other service ports into any set of numbers
between 1024~65535, reducing the risk of outsiders being able to guess which ports you
are using.
6. Enable HTTPS
We suggest you to enable HTTPS, so that you visit Web service through a secure
communication channel.
7. Enable Whitelist
We suggest you to enable whitelist function to prevent everyone, except those with
specified IP addresses, from accessing the system. Therefore, please be sure to add your
computer’s IP address and the accompanying equipment’s IP address to the whitelist.
8. MAC Address Binding
We recommend you to bind the IP and MAC address of the gateway to the equipment,
thus reducing the risk of ARP spoofing.
9. Assign Accounts and Privileges Reasonably
According to business and management requirements, reasonably add users and assign a
minimum set of permissions to them.
10. Disable Unnecessary Services and Choose Secure Modes
If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP,
etc., to reduce risks.
If necessary, it is highly recommended that you use safe modes, including but not limited to
the following services:
SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication
passwords.
SMTP: Choose TLS to access mailbox server.
FTP: Choose SFTP, and set up strong passwords.
AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords.
11. Audio and Video Encrypted Transmission
If your audio and video data contents are very important or sensitive, we recommend that
you use encrypted transmission function, to reduce the risk of audio and video data being
stolen during transmission.
Reminder: encrypted transmission will cause some loss in transmission efficiency.
12. Secure Auditing
Check online users: we suggest that you check online users regularly to see if the
Device is logged in without authorization.
Check equipment log: By viewing the logs, you can know the IP addresses that were
used to log in to your devices and their key operations.
13. Network Log
Due to the limited storage capacity of the equipment, the stored log is limited. If you need
to save the log for a long time, it is recommended that you enable the network log function
to ensure that the critical logs are synchronized to the network log server for tracing.
14. Construct a Safe Network Environment
In order to better ensure the safety of equipment and reduce potential cyber risks, we
recommend:
Disable the port mapping function of the router to avoid direct access to the intranet
devices from external network.

User’s Manual
6
The network should be partitioned and isolated according to the actual network needs.
If there are no communication requirements between two sub networks, it is
suggested to use VLAN, network GAP and other technologies to partition the network,
so as to achieve the network isolation effect.
Establish the 802.1x access authentication system to reduce the risk of unauthorized
access to private networks.
It is recommended that you enable your device's firewall or blacklist and whitelist
feature to reduce the risk that your device might be attacked.

User’s Manual