Daikin VRV IV RKXYQ5T8Y1B Series User manual
Installation and operation manual
VRV IV compressor unit for indoor installation English
Installation and operation manual
VRV IV compressor unit for indoor installation
RKXYQ5T8Y1B
RKXYQ8T7Y1B
3P397286-5G
3P397286-5G
CE - DECLARATION-OF-CONFORMITY CE - DECLARACION-DE-CONFORMIDAD CE - DECLARAÇÃO-DE-CONFORMIDADE CE - ERKLÆRING OM-SAMSVAR CE - IZJAVA-O-USKLAĐENOSTI CE - IZJAVA O SKLADNOSTI CE - ATITIKTIES-DEKLARACIJA
CE - KONFORMITÄTSERKLÄRUNG CE - DICHIARAZIONE-DI-CONFORMITA CE - ЗАЯВЛЕНИЕ-О-СООТВЕТСТВИИ CE - ILMOITUS-YHDENMUKAISUUDESTA CE - MEGFELELŐSÉGI-NYILATKOZAT CE - VASTAVUSDEKLARATSIOON CE - ATBILSTĪBAS-DEKLARĀCIJA
CE - DECLARATION-DE-CONFORMITE CE - ΔHΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ CE -
OVERENSSTEMMELSESERKLÆRING CE - PROHLÁŠENÍ-O-SHODĚ CE - DEKLARACJA-ZGODNOŚCI CE - ДЕКЛАРАЦИЯ-ЗА-СЪОТВЕТСТВИЕ CE - VYHLÁSENIE-ZHODY
CE - CONFORMITEITSVERKLARING CE - FÖRSÄKRAN-OM-
ÖVERENSTÄMMELSE CE - DECLARAŢIE-DE-CONFORMITATE CE - UYGUNLUK-BEYANI
01
02
03
04
05
06
07
08
declares under its sole responsibility that the air conditioning models to which this declaration
relates:
erklärt auf seine alleinige Verantwortung daß die Modelle der Klimageräte für die diese Erklärung
bestimmt ist:
déclare sous sa seule responsabilité que les appareils d'air conditionné visés par la présente
déclaration:
verklaart hierbij op eigen exclusieve verantwoordelijkheid dat de airconditioning units waarop deze
verklaring betrekking heeft:
declara baja su única responsabilidad que los modelos de aire acondicionado a los cuales hace
referencia la declaración:
dichiara sotto sua responsabilità che i condizionatori modello a cui è riferita questa dichiarazione:
δηλώνει με αποκλειστική της ευθύνη ότι τα μοντέλα των κλιματιστικών συσκευών στα οποία
αναφέρεται η παρούσα δήλωση:
declara sob sua exclusiva responsabilidade que os modelos de ar condicionado a que esta
declaração se refere:
09
10
11
12
13
14
15
16
заявляет, исключительно под свою ответственность, что модели кондиционеров воздуха, к
которым относится настоящее заявление:
erklærer under eneansvar, at klimaanlægmodellerne, som denne deklaration vedrører:
deklarerar i egenskap av huvudansvarig, att luftkonditioneringsmodellerna som berörs av denna
deklaration innebär att:
erklærer et fullstendig ansvar for at de luftkondisjoneringsmodeller som berøres av denne
deklarasjon, innebærer at:
ilmoittaa yksinomaan omalla vastuullaan, että tämän ilmoituksen tarkoittamat ilmastointilaitteiden
mallit:
prohlašuje ve své plné odpovědnosti, že modely klimatizace, k nimž se toto prohlášení vztahuje:
izjavljuje pod isključivo vlastitom odgovornošću da su modeli klima uređaja na koje se ova izjava
odnosi:
teljes felelőssége tudatában kijelenti, hogy a klímaberendezés modellek, melyekre e nyilatkozat
vonatkozik:
17
18
19
20
21
22
23
24
25
deklaruje na własną i wyłączną odpowiedzialność, że modele klimatyzatorów, których dotyczy
niniejsza deklaracja:
declară pe proprie răspundere că aparatele de aer condiţionat la care se referă această declaraţie:
z vso odgovornostjo izjavlja, da so modeli klimatskih naprav, na katere se izjava nanaša:
kinnitab oma täielikul vastutusel, et käesoleva deklaratsiooni alla kuuluvad kliimaseadmete mudelid:
декларира на своя отговорност, че моделите климатична инсталация, за които се отнася тази
декларация:
visiška savo atsakomybe skelbia, kad oro kondicionavimo prietaisų modeliai, kuriems yra taikoma ši
deklaracija:
ar pilnu atbildību apliecina, ka tālāk uzskaitīto modeļu gaisa kondicionētāji, uz kuriem attiecas šī
deklarācija:
vyhlasuje na vlastnú zodpovednosť, že tieto klimatizačné modely, na ktoré sa vzťahuje toto
vyhlásenie:
tamamen kendi sorumluluǧunda olmak üzere bu bildirinin ilgili olduǧu klima modellerinin aşaǧıdaki
gibi olduǧunu beyan eder:
01
02
03
04
05
06
07
are in conformity with the following standard(s) or other normative document(s), provided that these
are used in accordance with our instructions:
der/den folgenden Norm(en) oder einem anderen Normdokument oder -dokumenten entspricht/
entsprechen, unter der Voraussetzung, daß sie gemäß unseren Anweisungen eingesetzt werden:
sont conformes à la/aux norme(s) ou autre(s) document(s) normatif(s), pour autant qu'ils soient utilisés
conformément à nos instructions:
conform de volgende norm(en) of één of meer andere bindende documenten zijn, op voorwaarde dat
ze worden gebruikt overeenkomstig onze instructies:
están en conformidad con la(s) siguiente(s) norma(s) u otro(s) documento(s) normativo(s), siempre
que sean utilizados de acuerdo con nuestras instrucciones:
sono conformi al(i) seguente(i) standard(s) o altro(i) documento(i) a carattere normativo, a patto che
vengano usati in conformità alle nostre istruzioni:
είναι σύμφωνα με το(α) ακόλουθο(α) πρότυπο(α) ή άλλο έγγραφο(α) κανονισμών, υπό την
προϋπόθεση ότι χρησιμοποιούνται
σύμφωνα με τις οδηγίες μας:
08
09
10
11
12
13
14
15
estão em conformidade com a(s) seguinte(s) norma(s) ou outro(s) documento(s) normativo(s), desde
que estes sejam utilizados de
acordo com as nossas instruções:
соответствуют следующим стандартам или другим нормативным документам, при условии их
использования согласно нашим инструкциям:
overholder følgende standard(er) eller andet/andre retningsgivende dokument(er), forudsat at disse
anvendes i henhold til vore instrukser:
respektive utrustning är utförd i överensstämmelse med och följer följande standard(er) eller andra
normgivande dokument, under förutsättning att användning sker i överensstämmelse med våra
instruktioner:
respektive utstyr er i overensstemmelse med følgende standard(er) eller andre normgivende
dokument(er), under forutssetning av at disse brukes i henhold til våre instrukser:
vastaavat seuraavien standardien ja muiden ohjeellisten dokumenttien vaatimuksia edellyttäen, että
niitä käytetään ohjeidemme mukaisesti:
za předpokladu, že jsou využívány v souladu s našimi pokyny, odpovídají následujícím normám nebo
normativním dokumentům:
u skladu sa slijedećim standardom(ima) ili drugim normativnim dokumentom(ima), uz uvjet da se oni
koriste u skladu s našim uputama:
16
17
18
19
20
21
22
23
24
25
megfelelnek az alábbi szabvány(ok)nak vagy egyéb irányadó dokumentum(ok)nak, ha azokat előírás
szerint használják:
spełniają wymogi następujących norm i innych dokumentów normalizacyjnych, pod warunkiem że
używane są zgodnie z naszymi instrukcjami:
sunt în conformitate cu următorul (următoarele) standard(e) sau alt(e) document(e) normativ(e), cu
condiţia ca acestea să fie utilizate în conformitate cu instrucţiunile noastre:
skladni z naslednjimi standardi in drugimi normativi, pod pogojem, da se uporabljajo v skladu z našimi
navodili:
on vastavuses järgmis(t)e standardi(te)ga või teiste normatiivsete dokumentidega, kui neid kasutatakse
vastavalt meie juhenditele:
съответстват на следните стандарти или други нормативни документи, при условие, че се
използват съгласно нашите инструкции:
atitinka žemiau nurodytus standartus ir (arba) kitus norminius dokumentus su sąlyga, kad yra
naudojami pagal mūsų nurodymus:
tad, ja lietoti atbilstoši ražotāja norādījumiem, atbilst sekojošiem standartiem un citiem normatīviem
dokumentiem:
sú v zhode s nasledovnou(ými) normou(ami) alebo iným(i) normatívnym(i) dokumentom(ami), za
predpokladu, že sa používajú v súlade snašim návodom:
ürünün, talimatlarımıza göre kullanılması koşuluyla aşağıdaki standartlar ve norm belirten belgelerle
uyumludur:
01
02
03
04
05
06
07
08
09
following the provisions of:
gemäß den Vorschriften der:
conformément aux stipulations des:
overeenkomstig de bepalingen van:
siguiendo las disposiciones de:
secondo le prescrizioni per:
με τήρηση των διατάξεων των:
de acordo com o previsto em:
в соответствии с положениями:
10
11
12
13
14
15
16
17
18
under iagttagelse af bestemmelserne i:
enligt villkoren i:
gitt i henhold til bestemmelsene i:
noudattaen määräyksiä:
za dodržení ustanovení předpisu:
prema odredbama:
követi a(z):
zgodnie z postanowieniami Dyrektyw:
în urma prevederilor:
19
20
21
22
23
24
25
ob upoštevanju določb:
vastavalt nõuetele:
следвайки клаузите на:
laikantis nuostatų, pateikiamų:
ievērojot prasības, kas noteiktas:
održiavajúc ustanovenia:
bunun koşullarına uygun olarak:
01
02
03
04
05
06
07
08
09
Directives, as amended.
Direktiven, gemäß Änderung.
Directives, telles que modifiées.
Richtlijnen, zoals geamendeerd.
Directivas, según lo enmendado.
Direttive, come da modifica.
Οδηγιών, όπως έχουν τροποποιηθεί.
Directivas, conforme alteração em.
Директив со всеми поправками.
10
11
12
13
14
15
16
17
Direktiver, med senere ændringer.
Direktiv, med företagna ändringar.
Direktiver, med foretatte endringer.
Direktiivejä, sellaisina kuin ne ovat muutettuina.
v platném znění.
Smjernice, kako je izmijenjeno.
irányelv(ek) és módosításaik rendelkezéseit.
z późniejszymi poprawkami.
18
19
20
21
22
23
24
25
Directivelor, cu amendamentele respective.
Direktive z vsemi spremembami.
Direktiivid koos muudatustega.
Директиви, с техните изменения.
Direktyvose su papildymais.
Direktīvās un to papildinājumos.
Smernice, v platnom znení.
Değiştirilmiş halleriyle Yönetmelikler.
01Note*
02Hinweis*
03Remarque
*
04Bemerk*
05Nota*
as set out in <A> and judged
positively by <B> according to the
Certificate<C>.
wie in <A> aufgeführt und von <B>
positiv
beurteilt gemäß Zertifikat<C>.
tel que défini dans <A> et évalué
positivement par <B> conformément
au Certificat<C>.
zoals vermeld in <A> en positief
beoordeeld door <B>
overeenkomstig Certificaat<C>.
como se establece en <A> y es
valorado positivamente por <B> de
acuerdo con el Certificado<C>.
06Nota*
07Σημείωση*
08Nota*
09Примечан
ие*
10Bemærk*
delineato nel <A> e giudicato
positivamente da<B> secondo il
Certificato<C>.
όπως καθορίζεται στο <A> και κρίνεται
θετικά
από το <B> σύμφωνα με το
Πιστοποιητικό<C>.
tal como estabelecido em <A> e com o
parecer positivo de <B> de acordo com
o Certificado<C>.
как указано в <A> и в соответствии
сположительным решением <B>
согласно Свидетельству<C>.
som anført i <A> og positivt vurderet af
<B> ihenhold til Certifikat<C>.
11Informatio
n*
12Merk*
13Huom*
14Poznámka
*
15Napomen
a*
enligt <A> och godkänts av <B>
enligt Certifikatet<C>.
som det fremkommer i <A> og
gjennom positiv bedømmelse av <B>
ifølge Sertifikat<C>.
jotka on esitetty asiakirjassa <A> ja
jotka <B>
on hyväksynyt Sertifikaatin<C>
mukaisesti.
jak bylo uvedeno v <A> a pozitivně
zjištěno
<B> vsouladu sosvědčením<C>.
kako je izloženo u <A> i pozitivno
ocijenjeno odstrane <B> prema
Certifikatu<C>.
16Megjegyz
és*
17Uwaga*
18Notă*
19Opomba*
20Märkus*
a(z) <A> alapján, a(z) <B> igazolta a
megfelelést, a(z) <C>tanúsítvány
szerint.
zgodnie z dokumentacją <A>,
pozytywną
opinią <B> i Świadectwem<C>.
aşa cum este stabilit în <A> şi
apreciat pozitiv de<B> în
conformitate cu Certificatul<C>.
kot je določeno v <A> in odobreno s
strani <B> vskladu
scertifikatom<C>.
nagu on näidatud dokumendis <A> ja
heaks kiidetud <B> järgi vastavalt
sertifikaadile<C>.
21Забележк
а*
22Pastaba*
23Piezīmes*
24Poznámka
*
25Not*
както е изложено в <A> и оценено
положително от <B> съгласно
Сертификата<C>.
kaip nustatyta <A> ir kaip teigiamai
nuspręsta <B> pagal Sertifikatą<C>.
kā norādīts <A> un atbilstoši <B>
pozitīvajam vērtējumam saskaņā ar
sertifikātu<C>.
ako bolo uvedené v <A> a pozitívne
zistené <B> vsúlade s
osvedčením<C>.
<A>’da belirtildiği gibi ve
<C>Sertifikasına göre <B> tarafından
olumlu olarak değerlendirildiği gibi.
01**
02**
03**
04**
05**
06**
Daikin Europe N.V. is authorised to compile the Technical Construction
File.
Daikin Europe N.V. hat die Berechtigung die Technische Konstruktionsakte
zusammenzustellen.
Daikin Europe N.V. est autorisé à compiler le Dossier de Construction
Technique.
Daikin Europe N.V. is bevoegd om het Technisch Constructiedossier
samen te stellen.
Daikin Europe N.V. está autorizado a compilar el Archivo de Construcción
Técnica.
Daikin Europe N.V. è autorizzata a redigere il File Tecnico di Costruzione.
07**
08**
09**
10**
11**
12**
Η Daikin Europe N.V. είναι εξουσιοδοτημένη να συντάξει τον Τεχνικό φάκελο
κατασκευής.
A Daikin Europe N.V. está autorizada a compilar a documentação técnica de
fabrico.
Компания Daikin Europe N.V. уполномочена составить Комплект
технической документации.
Daikin Europe N.V. er autoriseret til at udarbejde de tekniske
konstruktionsdata.
Daikin Europe N.V. är bemyndigade att sammanställa den tekniska
konstruktionsfilen.
Daikin Europe N.V. har tillatelse til å kompilere den Tekniske
konstruksjonsfilen.
13**
14**
15**
16**
17**
18**
Daikin Europe N.V. on valtuutettu laatimaan Teknisen asiakirjan.
Společnost Daikin Europe N.V. má oprávnění ke kompilaci souboru technické
konstrukce.
Daikin Europe N.V. je ovlašten za izradu Datoteke o tehničkoj konstrukciji.
A Daikin Europe N.V. jogosult a műszaki konstrukciós dokumentáció
összeállítására.
Daikin Europe N.V. ma upoważnienie do zbierania i opracowywania
dokumentacji konstrukcyjnej.
Daikin Europe N.V. este autorizat să compileze Dosarul tehnic de
construcţie.
19**
20**
21**
22**
23**
24**
25**
Daikin Europe N.V. je pooblaščen za sestavo datoteke s tehnično
mapo.
Daikin Europe N.V. on volitatud koostama tehnilist dokumentatsiooni.
Daikin Europe N.V. е оторизирана да състави Акта за техническа
конструкция.
Daikin Europe N.V. yra įgaliota sudaryti šį techninės konstrukcijos failą.
Daikin Europe N.V. ir autorizēts sastādīt tehnisko dokumentāciju.
Spoločnosť Daikin Europe N.V. je oprávnená vytvoriť súbor technickej
konštrukcie.
Daikin Europe N.V. Teknik Yapı Dosyasını derlemeye yetkilidir.
Daikin Europe N.V.
RKXYQ5T8Y1B*,
RDXYQ5T8V1B*, RDXYQ8T7V1B*,
* = , , 1, 2, 3, ..., 9
EN60335-2-40,
Machinery 2006/42/EC
Electromagnetic Compatibility 2014/30/EU
**
*
CE - DECLARATION-OF-CONFORMITY CE - DECLARACION-DE-CONFORMIDAD CE - DECLARAÇÃO-DE-CONFORMIDADE CE - ERKLÆRING OM-SAMSVAR CE - IZJAVA-O-USKLAĐENOSTI CE - IZJAVA O SKLADNOSTI CE - ATITIKTIES-DEKLARACIJA
CE - KONFORMITÄTSERKLÄRUNG CE - DICHIARAZIONE-DI-CONFORMITA CE - ЗАЯВЛЕНИЕ-О-СООТВЕТСТВИИ CE - ILMOITUS-YHDENMUKAISUUDESTA CE - MEGFELELŐSÉGI-NYILATKOZAT CE - VASTAVUSDEKLARATSIOON CE - ATBILSTĪBAS-DEKLARĀCIJA
CE - DECLARATION-DE-CONFORMITE CE - ΔHΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ CE - OVERENSSTEMMELSESERKLÆRING CE - PROHLÁŠENÍ-O-SHODĚ CE - DEKLARACJA-ZGODNOŚCI CE - ДЕКЛАРАЦИЯ-ЗА-СЪОТВЕТСТВИЕ CE - VYHLÁSENIE-ZHODY
CE - CONFORMITEITSVERKLARING CE - FÖRSÄKRAN-OM-ÖVERENSTÄMMELSE CE - DECLARAŢIE-DE-CONFORMITATE CE - UYGUNLUK-BEYANI
01
02
03
04
05
06
07
08
declares under its sole responsibility that the air conditioning models to which this declaration relates:
erklärt auf seine alleinige Verantwortung daß die Modelle der Klimageräte für die diese Erklärung bestimmt ist:
déclare sous sa seule responsabilité que les appareils d'air conditionné visés par la présente déclaration:
verklaart hierbij op eigen exclusieve verantwoordelijkheid dat de airconditioning units waarop deze verklaring betrekking heeft:
declara baja su única responsabilidad que los modelos de aire acondicionado a los cuales hace referencia la declaración:
dichiara sotto sua responsabilità che i condizionatori modello a cui è riferita questa dichiarazione:
δηλώνει με αποκλειστική της ευθύνη ότι τα μοντέλα των κλιματιστικών συσκευών στα οποία αναφέρεται η παρούσα δήλωση:
declara sob sua exclusiva responsabilidade que os modelos de ar condicionado a que esta declaração se refere:
09
10
11
12
13
14
15
16
заявляет, исключительно под свою ответственность, что модели кондиционеров воздуха, к которым относится настоящее заявление:
erklærer under eneansvar, at klimaanlægmodellerne, som denne deklaration vedrører:
deklarerar i egenskap av huvudansvarig, att luftkonditioneringsmodellerna som berörs av denna deklaration innebär att:
erklærer et fullstendig ansvar for at de luftkondisjoneringsmodeller som berøres av denne deklarasjon, innebærer at:
ilmoittaa yksinomaan omalla vastuullaan, että tämän ilmoituksen tarkoittamat ilmastointilaitteiden mallit:
prohlašuje ve své plné odpovědnosti, že modely klimatizace, k nimž se toto prohlášení vztahuje:
izjavljuje pod isključivo vlastitom odgovornošću da su modeli klima uređaja na koje se ova izjava odnosi:
teljes felelőssége tudatában kijelenti, hogy a klímaberendezés modellek, melyekre e nyilatkozat vonatkozik:
17
18
19
20
21
22
23
24
25
deklaruje na własną i wyłączną odpowiedzialność, że modele klimatyzatorów, których dotyczy niniejsza deklaracja:
declară pe proprie răspundere că aparatele de aer condiţionat la care se referă această declaraţie:
z vso odgovornostjo izjavlja, da so modeli klimatskih naprav, na katere se izjava nanaša:
kinnitab oma täielikul vastutusel, et käesoleva deklaratsiooni alla kuuluvad kliimaseadmete mudelid:
декларира на своя отговорност, че моделите климатична инсталация, за които се отнася тази декларация:
visiška savo atsakomybe skelbia, kad oro kondicionavimo prietaisų modeliai, kuriems yra taikoma ši deklaracija:
ar pilnu atbildību apliecina, ka tālāk uzskaitīto modeļu gaisa kondicionētāji, uz kuriem attiecas šī deklarācija:
vyhlasuje na vlastnú zodpovednosť, že tieto klimatizačné modely, na ktoré sa vzťahuje toto vyhlásenie:
tamamen kendi sorumluluǧunda olmak üzere bu bildirinin ilgili olduǧu klima modellerinin aşaǧıdaki gibi olduǧunu beyan eder:
01
02
03
04
05
06
07
are in conformity with the following standard(s) or other normative document(s), provided that these are used in accordance with our instructions:
der/den folgenden Norm(en) oder einem anderen Normdokument oder -dokumenten entspricht/entsprechen, unter der Voraussetzung, daß sie gemäß
unseren Anweisungen eingesetzt werden:
sont conformes à la/aux norme(s) ou autre(s) document(s) normatif(s), pour autant qu'ils soient utilisés conformément à nos instructions:
conform de volgende norm(en) of één of meer andere bindende documenten zijn, op voorwaarde dat ze worden gebruikt overeenkomstig onze
instructies:
están en conformidad con la(s) siguiente(s) norma(s) u otro(s) documento(s) normativo(s), siempre que sean utilizados de acuerdo con nuestras
instrucciones:
sono conformi al(i) seguente(i) standard(s) o altro(i) documento(i) a carattere normativo, a patto che vengano usati in conformità alle nostre istruzioni:
είναι σύμφωνα με το(α) ακόλουθο(α) πρότυπο(α) ή άλλο έγγραφο(α) κανονισμών, υπό την προϋπόθεση ότι χρησιμοποιούνται
σύμφωνα με τις οδηγίες μας:
08
09
10
11
12
13
14
15
estão em conformidade com a(s) seguinte(s) norma(s) ou outro(s) documento(s) normativo(s), desde que estes sejam utilizados de
acordo com as nossas instruções:
соответствуют следующим стандартам или другим нормативным документам, при условии их использования согласно нашим инструкциям:
overholder følgende standard(er) eller andet/andre retningsgivende dokument(er), forudsat at disse anvendes i henhold til vore instrukser:
respektive utrustning är utförd i överensstämmelse med och följer följande standard(er) eller andra normgivande dokument, under förutsättning att
användning sker i överensstämmelse med våra instruktioner:
respektive utstyr er i overensstemmelse med følgende standard(er) eller andre normgivende dokument(er), under forutssetning av at disse brukes i
henhold til våre instrukser:
vastaavat seuraavien standardien ja muiden ohjeellisten dokumenttien vaatimuksia edellyttäen, että niitä käytetään ohjeidemme mukaisesti:
za předpokladu, že jsou využívány v souladu s našimi pokyny, odpovídají následujícím normám nebo normativním dokumentům:
u skladu sa slijedećim standardom(ima) ili drugim normativnim dokumentom(ima), uz uvjet da se oni koriste u skladu s našim uputama:
16
17
18
19
20
21
22
23
24
25
megfelelnek az alábbi szabvány(ok)nak vagy egyéb irányadó dokumentum(ok)nak, ha azokat előírás szerint használják:
spełniają wymogi następujących norm i innych dokumentów normalizacyjnych, pod warunkiem że używane są zgodnie z naszymi instrukcjami:
sunt în conformitate cu următorul (următoarele) standard(e) sau alt(e) document(e) normativ(e), cu condiţia ca acestea să fie utilizate în conformitate cu
instrucţiunile noastre:
skladni z naslednjimi standardi in drugimi normativi, pod pogojem, da se uporabljajo v skladu z našimi navodili:
on vastavuses järgmis(t)e standardi(te)ga või teiste normatiivsete dokumentidega, kui neid kasutatakse vastavalt meie juhenditele:
съответстват на следните стандарти или други нормативни документи, при условие, че се използват съгласно нашите инструкции:
atitinka žemiau nurodytus standartus ir (arba) kitus norminius dokumentus su sąlyga, kad yra naudojami pagal mūsų nurodymus:
tad, ja lietoti atbilstoši ražotāja norādījumiem, atbilst sekojošiem standartiem un citiem normatīviem dokumentiem:
sú v zhode s nasledovnou(ými) normou(ami) alebo iným(i) normatívnym(i) dokumentom(ami), za predpokladu, že sa používajú v súlade snašim
návodom:
ürünün, talimatlarımıza göre kullanılması koşuluyla aşağıdaki standartlar ve norm belirten belgelerle uyumludur:
01
02
03
04
05
06
07
08
09
following the provisions of:
gemäß den Vorschriften der:
conformément aux stipulations des:
overeenkomstig de bepalingen van:
siguiendo las disposiciones de:
secondo le prescrizioni per:
με τήρηση των διατάξεων των:
de acordo com o previsto em:
в соответствии с положениями:
10
11
12
13
14
15
16
17
18
under iagttagelse af bestemmelserne i:
enligt villkoren i:
gitt i henhold til bestemmelsene i:
noudattaen määräyksiä:
za dodržení ustanovení předpisu:
prema odredbama:
követi a(z):
zgodnie z postanowieniami Dyrektyw:
în urma prevederilor:
19
20
21
22
23
24
25
ob upoštevanju določb:
vastavalt nõuetele:
следвайки клаузите на:
laikantis nuostatų, pateikiamų:
ievērojot prasības, kas noteiktas:
održiavajúc ustanovenia:
bunun koşullarına uygun olarak:
01
02
03
04
05
06
07
08
09
Directives, as amended.
Direktiven, gemäß Änderung.
Directives, telles que modifiées.
Richtlijnen, zoals geamendeerd.
Directivas, según lo enmendado.
Direttive, come da modifica.
Οδηγιών, όπως έχουν τροποποιηθεί.
Directivas, conforme alteração em.
Директив со всеми поправками.
10
11
12
13
14
15
16
17
Direktiver, med senere ændringer.
Direktiv, med företagna ändringar.
Direktiver, med foretatte endringer.
Direktiivejä, sellaisina kuin ne ovat muutettuina.
v platném znění.
Smjernice, kako je izmijenjeno.
irányelv(ek) és módosításaik rendelkezéseit.
z późniejszymi poprawkami.
18
19
20
21
22
23
24
25
Directivelor, cu amendamentele respective.
Direktive z vsemi spremembami.
Direktiivid koos muudatustega.
Директиви, с техните изменения.
Direktyvose su papildymais.
Direktīvās un to papildinājumos.
Smernice, v platnom znení.
Değiştirilmiş halleriyle Yönetmelikler.
01Note*
02Hinweis*
03Remarque*
04Bemerk*
05Nota*
as set out in <A> and judged positively by <B>
according to the Certificate<C>.
wie in <A> aufgeführt und von <B> positiv
beurteilt gemäß Zertifikat<C>.
tel que défini dans <A> et évalué positivement par <B>
conformément au Certificat<C>.
zoals vermeld in <A> en positief beoordeeld door <B>
overeenkomstig Certificaat<C>.
como se establece en <A> y es valorado
positivamente por <B> de acuerdo con el
Certificado<C>.
06Nota*
07Σημείωση*
08Nota*
09Примечание*
10Bemærk*
delineato nel <A> e giudicato positivamente da<B>
secondo il Certificato<C>.
όπως καθορίζεται στο <A> και κρίνεται θετικά
από το <B> σύμφωνα με το Πιστοποιητικό<C>.
tal como estabelecido em <A> e com o parecer positivo
de <B> de acordo com o Certificado<C>.
как указано в <A> и в соответствии сположительным
решением <B> согласно Свидетельству<C>.
som anført i <A> og positivt vurderet af <B> ihenhold til
Certifikat<C>.
11Information*
12Merk*
13Huom*
14Poznámka*
15Napomena*
enligt <A> och godkänts av <B> enligt
Certifikatet<C>.
som det fremkommer i <A> og gjennom positiv
bedømmelse av <B> ifølge Sertifikat<C>.
jotka on esitetty asiakirjassa <A> ja jotka <B>
on hyväksynyt Sertifikaatin<C> mukaisesti.
jak bylo uvedeno v <A> a pozitivně zjištěno
<B> vsouladu sosvědčením<C>.
kako je izloženo u <A> i pozitivno ocijenjeno odstrane
<B> prema Certifikatu<C>.
16Megjegyzés*
17Uwaga*
18Notă*
19Opomba*
20Märkus*
a(z) <A> alapján, a(z) <B> igazolta a megfelelést, a(z)
<C>tanúsítvány szerint.
zgodnie z dokumentacją <A>, pozytywną
opinią <B> i Świadectwem<C>.
aşa cum este stabilit în <A> şi apreciat pozitiv de<B>
în conformitate cu Certificatul<C>.
kot je določeno v <A> in odobreno s strani <B>
vskladu scertifikatom<C>.
nagu on näidatud dokumendis <A> ja heaks kiidetud
<B> järgi vastavalt sertifikaadile<C>.
21Забележка*
22Pastaba*
23Piezīmes*
24Poznámka*
25Not*
както е изложено в <A> и оценено положително от <B>
съгласно Сертификата<C>.
kaip nustatyta <A> ir kaip teigiamai nuspręsta <B> pagal
Sertifikatą<C>.
kā norādīts <A> un atbilstoši <B> pozitīvajam vērtējumam
saskaņā ar sertifikātu<C>.
ako bolo uvedené v <A> a pozitívne zistené <B> vsúlade
s osvedčením<C>.
<A>’da belirtildiği gibi ve <C>Sertifikasına göre <B>
tarafından olumlu olarak değerlendirildiği gibi.
<A>
<B>
<C>
TÜV (NB1856)
12080901.T30
DAIKIN.TCF.030A30/04-2017
01**
02**
03**
04**
05**
06**
Daikin Europe N.V. is authorised to compile the Technical Construction File.
Daikin Europe N.V. hat die Berechtigung die Technische Konstruktionsakte zusammenzustellen.
Daikin Europe N.V. est autorisé à compiler le Dossier de Construction Technique.
Daikin Europe N.V. is bevoegd om het Technisch Constructiedossier samen te stellen.
Daikin Europe N.V. está autorizado a compilar el Archivo de Construcción Técnica.
Daikin Europe N.V. è autorizzata a redigere il File Tecnico di Costruzione.
07**
08**
09**
10**
11**
12**
Η Daikin Europe N.V. είναι εξουσιοδοτημένη να συντάξει τον Τεχνικό φάκελο κατασκευής.
A Daikin Europe N.V. está autorizada a compilar a documentação técnica de fabrico.
Компания Daikin Europe N.V. уполномочена составить Комплект технической документации.
Daikin Europe N.V. er autoriseret til at udarbejde de tekniske konstruktionsdata.
Daikin Europe N.V. är bemyndigade att sammanställa den tekniska konstruktionsfilen.
Daikin Europe N.V. har tillatelse til å kompilere den Tekniske konstruksjonsfilen.
13**
14**
15**
16**
17**
18**
Daikin Europe N.V. on valtuutettu laatimaan Teknisen asiakirjan.
Společnost Daikin Europe N.V. má oprávnění ke kompilaci souboru technické konstrukce.
Daikin Europe N.V. je ovlašten za izradu Datoteke o tehničkoj konstrukciji.
A Daikin Europe N.V. jogosult a műszaki konstrukciós dokumentáció összeállítására.
Daikin Europe N.V. ma upoważnienie do zbierania i opracowywania dokumentacji konstrukcyjnej.
Daikin Europe N.V. este autorizat să compileze Dosarul tehnic de construcţie.
19**
20**
21**
22**
23**
24**
25**
Daikin Europe N.V. je pooblaščen za sestavo datoteke s tehnično mapo.
Daikin Europe N.V. on volitatud koostama tehnilist dokumentatsiooni.
Daikin Europe N.V. е оторизирана да състави Акта за техническа конструкция.
Daikin Europe N.V. yra įgaliota sudaryti šį techninės konstrukcijos failą.
Daikin Europe N.V. ir autorizēts sastādīt tehnisko dokumentāciju.
Spoločnosť Daikin Europe N.V. je oprávnená vytvoriť súbor technickej konštrukcie.
Daikin Europe N.V. Teknik Yapı Dosyasını derlemeye yetkilidir.
Shigeki Morita
Director
Ostend, 2nd of October 2017
2PW51591-6F
2PW51591-6F
CE - DECLARATION-OF-CONFORMITY CE - DECLARACION-DE-CONFORMIDAD CE - DECLARAÇÃO-DE-CONFORMIDADE CE - ERKLÆRING OM-SAMSVAR CE - IZJAVA-O-USKLAĐENOSTI CE - IZJAVA O SKLADNOSTI CE - ATITIKTIES-DEKLARACIJA
CE - KONFORMITÄTSERKLÄRUNG CE - DICHIARAZIONE-DI-CONFORMITA CE - ЗАЯВЛЕНИЕ-О-СООТВЕТСТВИИ CE - ILMOITUS-YHDENMUKAISUUDESTA CE - MEGFELELŐSÉGI-NYILATKOZAT CE - VASTAVUSDEKLARATSIOON CE - ATBILSTĪBAS-DEKLARĀCIJA
CE - DECLARATION-DE-CONFORMITE CE - ΔHΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ CE -
OVERENSSTEMMELSESERKLÆRING CE - PROHLÁŠENÍ-O-SHODĚ CE - DEKLARACJA-ZGODNOŚCI CE - ДЕКЛАРАЦИЯ-ЗА-СЪОТВЕТСТВИЕ CE - VYHLÁSENIE-ZHODY
CE - CONFORMITEITSVERKLARING CE - FÖRSÄKRAN-OM-
ÖVERENSTÄMMELSE CE - DECLARAŢIE-DE-CONFORMITATE CE - UYGUNLUK-BEYANI
01
02
03
04
05
06
07
08
declares under its sole responsibility that the air conditioning models to which this declaration
relates:
erklärt auf seine alleinige Verantwortung daß die Modelle der Klimageräte für die diese Erklärung
bestimmt ist:
déclare sous sa seule responsabilité que les appareils d'air conditionné visés par la présente
déclaration:
verklaart hierbij op eigen exclusieve verantwoordelijkheid dat de airconditioning units waarop deze
verklaring betrekking heeft:
declara baja su única responsabilidad que los modelos de aire acondicionado a los cuales hace
referencia la declaración:
dichiara sotto sua responsabilità che i condizionatori modello a cui è riferita questa dichiarazione:
δηλώνει με αποκλειστική της ευθύνη ότι τα μοντέλα των κλιματιστικών συσκευών στα οποία
αναφέρεται η παρούσα δήλωση:
declara sob sua exclusiva responsabilidade que os modelos de ar condicionado a que esta
declaração se refere:
09
10
11
12
13
14
15
16
заявляет, исключительно под свою ответственность, что модели кондиционеров воздуха, к
которым относится настоящее заявление:
erklærer under eneansvar, at klimaanlægmodellerne, som denne deklaration vedrører:
deklarerar i egenskap av huvudansvarig, att luftkonditioneringsmodellerna som berörs av denna
deklaration innebär att:
erklærer et fullstendig ansvar for at de luftkondisjoneringsmodeller som berøres av denne
deklarasjon, innebærer at:
ilmoittaa yksinomaan omalla vastuullaan, että tämän ilmoituksen tarkoittamat ilmastointilaitteiden
mallit:
prohlašuje ve své plné odpovědnosti, že modely klimatizace, k nimž se toto prohlášení vztahuje:
izjavljuje pod isključivo vlastitom odgovornošću da su modeli klima uređaja na koje se ova izjava
odnosi:
teljes felelőssége tudatában kijelenti, hogy a klímaberendezés modellek, melyekre e nyilatkozat
vonatkozik:
17
18
19
20
21
22
23
24
25
deklaruje na własną i wyłączną odpowiedzialność, że modele klimatyzatorów, których dotyczy
niniejsza deklaracja:
declară pe proprie răspundere că aparatele de aer condiţionat la care se referă această declaraţie:
z vso odgovornostjo izjavlja, da so modeli klimatskih naprav, na katere se izjava nanaša:
kinnitab oma täielikul vastutusel, et käesoleva deklaratsiooni alla kuuluvad kliimaseadmete mudelid:
декларира на своя отговорност, че моделите климатична инсталация, за които се отнася тази
декларация:
visiška savo atsakomybe skelbia, kad oro kondicionavimo prietaisų modeliai, kuriems yra taikoma ši
deklaracija:
ar pilnu atbildību apliecina, ka tālāk uzskaitīto modeļu gaisa kondicionētāji, uz kuriem attiecas šī
deklarācija:
vyhlasuje na vlastnú zodpovednosť, že tieto klimatizačné modely, na ktoré sa vzťahuje toto
vyhlásenie:
tamamen kendi sorumluluǧunda olmak üzere bu bildirinin ilgili olduǧu klima modellerinin aşaǧıdaki
gibi olduǧunu beyan eder:
01
02
03
04
are in conformity with the following standard(s) or
other normative document(s), provided that these
are used in accordance with our instructions:
der/den folgenden Norm(en) oder einem anderen
Normdokument oder -dokumenten entspricht/
entsprechen, unter der Voraussetzung, daß sie
gemäß unseren Anweisungen eingesetzt werden:
sont conformes à la/aux norme(s) ou autre(s)
document(s) normatif(s), pour autant qu'ils soient
utilisés conformément à nos instructions:
conform de volgende norm(en) of één of meer
andere bindende documenten zijn, op
voorwaarde dat ze worden gebruikt
overeenkomstig onze instructies:
05
06
07
08
están en conformidad con la(s) siguiente(s)
norma(s) u otro(s) documento(s) normativo(s),
siempre que sean utilizados de acuerdo con
nuestras instrucciones:
sono conformi al(i) seguente(i) standard(s) o
altro(i) documento(i) a carattere normativo, a
patto che vengano usati in conformità alle nostre
istruzioni:
είναι σύμφωνα με το(α) ακόλουθο(α) πρότυπο(α)
ή άλλο έγγραφο(α) κανονισμών, υπό την
προϋπόθεση ότι χρησιμοποιούνται σύμφωνα με
τις οδηγίες μας:
estão em conformidade com a(s) seguinte(s)
norma(s) ou outro(s) documento(s) normativo(s),
desde que estes sejam utilizados de acordo com
as nossas instruções:
09
10
11
соответствуют следующим стандартам или
другим нормативным документам, при
условии их использования согласно нашим
инструкциям:
overholder følgende standard(er) eller andet/
andre
retningsgivende dokument(er), forudsat at disse
anvendes i henhold til vore instrukser:
respektive utrustning är utförd i
överensstämmelse med och
följer följande standard(er) eller andra
normgivande dokument, under förutsättning att
användning sker i överensstämmelse med våra
instruktioner:
12
13
14
15
16
respektive utstyr er i overensstemmelse med
følgende standard(er) eller andre normgivende
dokument(er), under forutssetning av at disse
brukes i henhold til våre instrukser:
vastaavat seuraavien standardien ja muiden
ohjeellisten dokumenttien vaatimuksia
edellyttäen, että niitä käytetään ohjeidemme
mukaisesti:
za předpokladu, že jsou využívány v souladu s
našimi pokyny, odpovídají následujícím normám
nebo normativním dokumentům:
u skladu sa slijedećim standardom(ima) ili drugim
normativnim dokumentom(ima), uz uvjet da se
oni koriste u skladu s našim uputama:
megfelelnek az alábbi szabvány(ok)nak vagy
egyéb irányadó dokumentum(ok)nak, ha azokat
előírás szerint használják:
17
18
19
20
spełniają wymogi następujących norm i innych
dokumentów normalizacyjnych, pod warunkiem
że używane są zgodnie z naszymi instrukcjami:
sunt în conformitate cu următorul (următoarele)
standard(e) sau alt(e) document(e) normativ(e),
cu condiţia ca acestea să fie utilizate în
conformitate cu instrucţiunile noastre:
skladni z naslednjimi standardi in drugimi
normativi, pod
pogojem, da se uporabljajo v skladu z našimi
navodili:
on vastavuses järgmis(t)e standardi(te)ga või
teiste normatiivsete dokumentidega, kui neid
kasutatakse vastavalt meie juhenditele:
21
22
23
24
25
съответстват на следните стандарти или
други нормативни документи, при условие, че
се използват съгласно нашите инструкции:
atitinka žemiau nurodytus standartus ir (arba)
kitus norminius dokumentus su sąlyga, kad yra
naudojami pagal mūsų nurodymus:
tad, ja lietoti atbilstoši ražotāja norādījumiem,
atbilst sekojošiem standartiem un citiem
normatīviem dokumentiem:
sú v zhode s nasledovnou(ými) normou(ami)
alebo iným(i) normatívnym(i) dokumentom(ami),
za predpokladu, že sa používajú v súlade
snašim návodom:
ürünün, talimatlarımıza göre kullanılması
koşuluyla aşağıdaki standartlar ve norm belirten
belgelerle uyumludur:
01
02
03
04
05
06
07
08
09
following the provisions of:
gemäß den Vorschriften der:
conformément aux stipulations des:
overeenkomstig de bepalingen van:
siguiendo las disposiciones de:
secondo le prescrizioni per:
με τήρηση των διατάξεων των:
de acordo com o previsto em:
в соответствии с положениями:
10
11
12
13
14
15
16
17
18
under iagttagelse af bestemmelserne i:
enligt villkoren i:
gitt i henhold til bestemmelsene i:
noudattaen määräyksiä:
za dodržení ustanovení předpisu:
prema odredbama:
követi a(z):
zgodnie z postanowieniami Dyrektyw:
în urma prevederilor:
19
20
21
22
23
24
25
ob upoštevanju določb:
vastavalt nõuetele:
следвайки клаузите на:
laikantis nuostatų, pateikiamų:
ievērojot prasības, kas noteiktas:
održiavajúc ustanovenia:
bunun koşullarına uygun olarak:
01
02
03
04
05
06
07
08
09
Directives, as amended.
Direktiven, gemäß Änderung.
Directives, telles que modifiées.
Richtlijnen, zoals geamendeerd.
Directivas, según lo enmendado.
Direttive, come da modifica.
Οδηγιών, όπως έχουν τροποποιηθεί.
Directivas, conforme alteração em.
Директив со всеми поправками.
10
11
12
13
14
15
16
17
Direktiver, med senere ændringer.
Direktiv, med företagna ändringar.
Direktiver, med foretatte endringer.
Direktiivejä, sellaisina kuin ne ovat muutettuina.
v platném znění.
Smjernice, kako je izmijenjeno.
irányelv(ek) és módosításaik rendelkezéseit.
z późniejszymi poprawkami.
18
19
20
21
22
23
24
25
Directivelor, cu amendamentele respective.
Direktive z vsemi spremembami.
Direktiivid koos muudatustega.
Директиви, с техните изменения.
Direktyvose su papildymais.
Direktīvās un to papildinājumos.
Smernice, v platnom znení.
Değiştirilmiş halleriyle Yönetmelikler.
01
*
**
02
*
**
03
*
**
04
*
**
05
*
**
as set out in <A> and judged positively by <B>
according to the Certificate<C>.
as set out in the Technical Construction File <D>
and judged positively by <E> (Applied module
<F>). <G>. Risk category <H>. Also refer to next
page.
wie in <A> aufgeführt und von <B> positiv
beurteilt gemäß Zertifikat<C>.
wie in der Technischen Konstruktionsakte <D>
aufgeführt und von <E> (Angewandtes Modul
<F>) positiv ausgezeichnet. <G>. Risikoart <H>.
Siehe auch nächste Seite.
tel que défini dans <A> et évalué positivement
par <B> conformément au Certificat<C>.
tel que stipulé dans le Fichier de Construction
Technique <D> et jugé positivement par <E>
(Module appliqué <F>). <G>. Catégorie de risque
<H>. Se reporter également à la page suivante.
zoals vermeld in <A> en positief beoordeeld door
<B> overeenkomstig Certificaat<C>.
zoals vermeld in het Technisch
Constructiedossier <D> en inordebevonden
door <E> (Toegepaste module <F>). <G>.
Risicocategorie <H>. Zie ook de volgende
pagina.
como se establece en <A> y es valorado
positivamente por <B> deacuerdo con el
Certificado<C>.
tal como se expone en el Archivo de
Construcción Técnica <D> yjuzgado
positivamento por <E> (Modulo aplicado <F>).
<G>. Categoría de riesgo <H>. Consulte también
la siguiente página.
06
*
**
07
*
**
08
*
**
09
*
**
10
*
**
delineato nel <A> e giudicato positivamente
da<B> secondo ilCertificato<C>.
delineato nel File Tecnico di Costruzione <D> e
giudicato positivamente da <E> (Modulo <F>
applicato). <G>. Categoria dirischio <H>. Fare
riferimento anche alla pagina successiva.
όπως καθορίζεται στο <A> και κρίνεται θετικά
από το <B> σύμφωνα με το Πιστοποιητικό<C>.
όπως προσδιορίζεται στο Αρχείο Τεχνικής
Κατασκευής <D> και κρίνεται θετικά από το <E>
(Χρησιμοποιούμενη υπομονάδα <F>). <G>.
Κατηγορία επικινδυνότητας <H>. Ανατρέξτε
επίσης στην επόμενη σελίδα.
tal como estabelecido em <A> e com o parecer
positivo de <B> deacordo com o
Certificado<C>.
tal como estabelecido no Ficheiro Técnico de
Construção <D> ecomo parecer positivo de <E>
(Módulo aplicado <F>). <G>. Categoria de risco
<H>. Consultar também a página seguinte.
как указано в <A> и в соответствии
сположительным решением <B> согласно
Свидетельству<C>.
как указано в Досье технического топкования
<D> и в соответствии сположительным
решением <E>
(Прикладной модуль <F>). <G>. Категория
риска <H>. Также смотрите следующую
страницу.
som anført i <A> og positivt vurderet af <B>
ihenhold til Certifikat<C>.
som anført i den Tekniske Konstruktionsfil <D>
og positivt vurderet af <E> (Anvendt modul <F>).
<G>. Risikoklasse <H>. Se også næste side.
11
*
**
12
*
**
13
*
**
14
*
**
15
*
**
enligt <A> och godkänts av <B> enligt
Certifikatet<C>.
i enlighet med den Tekniska Konstruktionsfilen
<D> som positivt intygats av <E> (Fastsatt modul
<F>). <G>. Riskkategori <H>. Seäven nästa
sida.
som det fremkommer i <A> og gjennom positiv
bedømmelse av <B> ifølge Sertifikat<C>.
som det fremkommer i den Tekniske
Konstruksjonsfilen <D> og gjennom positiv
bedømmelse av <E> (Anvendt modul <F>). <G>.
Risikokategori <H>. Se også neste side.
jotka on esitetty asiakirjassa <A> ja jotka <B> on
hyväksynyt Sertifikaatin<C> mukaisesti.
jotka on esitetty Teknisessä Asiakirjassa <D> ja
jotka <E> on hyväksynyt (Sovellettu moduli <F>).
<G>. Vaaraluokka <H>. Katsomyös seuraava
sivu.
jak bylo uvedeno v <A> a pozitivně zjištěno <B>
vsouladu sosvědčením<C>.
jak bylo uvedeno v souboru technické konstrukce
<D> a pozitivně zjištěno <E> (použitý modul
<F>). <G>. Kategorie rizik <H>.
Viztakénásledující strana.
kako je izloženo u <A> i pozitivno ocijenjeno
odstrane <B> prema Certifikatu<C>.
kako je izloženo u Datoteci o tehničkoj
konstrukciji <D> i pozitivno ocijenjeno od strane
<E> (Primijenjen modul <F>). <G>. Kategorija
opasnosti <H>. Također pogledajte na slijedećoj
stranici.
16
*
**
17
*
**
18
*
**
19
*
**
20
*
**
a(z) <A> alapján, a(z) <B> igazolta a
megfelelést, a(z) <C>tanúsítvány szerint.
a(z) <D> műszaki konstrukciós dokumentáció
alapján, a(z) <E> igazolta a megfelelést
(alkalmazott modul: <F>). <G>.
Veszélyességikategória <H>. Lásd még a
következő oldalon.
zgodnie z dokumentacją <A>, pozytywną opinią
<B> i Świadectwem<C>.
zgodnie z archiwalną dokumentacją
konstrukcyjną <D> i pozytywną opinią <E>
(Zastosowany moduł <F>). <G>. Kategoria
zagrożenia<H>. Patrz także następna strona.
aşa cum este stabilit în <A> şi apreciat pozitiv
de<B> în conformitate cu Certificatul<C>.
conform celor stabilite în Dosarul tehnic de
construcţie <D> şiapreciate pozitiv de<E>
(Modul aplicat <F>). <G>. Categorie derisc<H>.
Consultaţi de asemenea pagina următoare.
kot je določeno v <A> in odobreno s strani <B>
vskladu scertifikatom<C>.
kot je določeno v tehnični mapi <D> in odobreno
s strani <E> (Uporabljen modul <F>). <G>.
Kategorija tveganja <H>. Glejtetudinanaslednji
strani.
nagu on näidatud dokumendis <A> ja heaks
kiidetud <B> järgi vastavalt sertifikaadile<C>.
nagu on näidatud tehnilises dokumentatsioonis
<D> ja heaks kiidetud <E> järgi (lisamoodul <F>).
<G>. Riskikategooria <H>. Vaadake ka järgmist
lehekülge.
21
*
**
22
*
**
23
*
**
24
*
**
25
*
**
както е изложено в <A> и оценено
положително от <B> съгласно
Сертификата<C>.
както е заложено в Акта за техническа
конструкция <D> и оценено положително от
<E> (Приложен модул <F>). <G>. Категория
риск <H>. Вижте също на следващата
страница.
kaip nustatyta <A> ir kaip teigiamai nuspręsta
<B> pagal Sertifikatą<C>.
kaip nurodyta Techninėje konstrukcijos byloje
<D> ir patvirtinta <E> (taikomas modulis <F>).
<G>. Rizikos kategorija <H>. Taip pat žiūrėkite ir
kitą puslapį.
kā norādīts <A> un atbilstoši <B> pozitīvajam
vērtējumam saskaņā arsertifikātu<C>.
kā noteikts tehniskajā dokumentācijā <D>,
atbilstoši <E> pozitīvajam lēmumam (piekritīgā
sadaĮa: <F>). <G>. Riska kategorija <H>. Skat.
arī nākošo lappusi.
ako bolo uvedené v <A> a pozitívne zistené <B>
vsúlade sosvedčením<C>.
ako je to stanovené v Súbore technickej
konštrukcie <D> a kladne posúdené <E>
(Aplikovaný modul <F>). <G>. Kategória
nebezpečia <H>. Viď tiež nasledovnú stranu.
<A>’da belirtildiği gibi ve <C>Sertifikasına göre
<B> tarafından olumlu olarak değerlendirildiği
gibi.
<D> Teknik Yapı Dosyasında belirtildiği gibi ve
<E> tarafından olumluolarak (Uygulanan modül
<F>) değerlendirilmiştir. <G>. Riskkategorisi
<H>. Ayrıca bir sonraki sayfaya bakın.
01 continuation of previous page:
02 Fortsetzung der vorherigen Seite:
03 suite de la page précédente:
04 vervolg van vorige pagina:
05 continuación de la página anterior:
06 continua dalla pagina precedente:
07 συνέχεια από την προηγούμενη
σελίδα:
08 continuação da página anterior:
09 продолжение предыдущей
страницы:
10 fortsat fra forrige side:
11 fortsättning från föregående sida:
12 fortsettelse fra forrige side:
13 jatkoa edelliseltä sivulta:
14 pokračování z předchozí strany:
15 nastavak s prethodne stranice:
16 folytatás az előző oldalról:
17 ciąg dalszy z poprzedniej strony:
18 continuarea paginii anterioare:
19 nadaljevanje s prejšnje strani:
20 eelmise lehekülje järg:
21 продължение от предходната
страница:
22 ankstesnio puslapio tęsinys:
23 iepriekšējās lappuses turpinājums:
24 pokračovanie z predchádzajúcej
strany:
25 önceki sayfadan devam:
01
02
03
04
05
06
Design Specifications of the models to which this declaration relates:
Konstruktionsdaten der Modelle auf die sich diese Erklärung bezieht:
Spécifications de conception des modèles auxquels se rapporte cette
déclaration:
Ontwerpspecificaties van de modellen waarop deze verklaring
betrekking heeft:
Especificaciones de diseño de los modelos a los cuales hace
referencia esta declaración:
Specifiche di progetto dei modelli cui fa riferimento la presente
dichiarazione:
07
08
09
10
11
12
Προδιαγραφές Σχεδιασμού των μοντέλων με τα οποία σχετίζεται η
δήλωση:
Especificações de projecto dos modelos a que se aplica esta
declaração:
Проектные характеристики моделей, к которым относится
настоящее заявление:
Typespecifikationer for de modeller, som denne erklæring vedrører:
Designspecifikationer för de modeller som denna deklaration gäller:
Konstruksjonsspesifikasjoner for de modeller som berøres av denne
deklarasjonen:
13
14
15
16
17
18
19
Tätä ilmoitusta koskevien mallien rakennemäärittely:
Specifikace designu modelů, ke kterým se vztahuje toto prohlášení:
Specifikacije dizajna za modele na koje se ova izjava odnosi:
A jelen nyilatkozat tárgyát képező modellek tervezési jellemzői:
Specyfikacje konstrukcyjne modeli, których dotyczy deklaracja:
Specificaţiile de proiectare ale modelelor la care se referă această
declaraţie:
Specifikacije tehničnega načrta za modele, na katere se nanaša ta
deklaracija:
20
21
22
23
24
25
Deklaratsiooni alla kuuluvate mudelite disainispetsifikatsioonid:
Проектни спецификации на моделите, за които се отнася
декларацията:
Konstrukcinės specifikacijos modelių, kurie susiję su šia deklaracija:
To modeļu dizaina specifikācijas, uz kurām attiecas šī deklarācija:
Konštrukčné špecifikácie modelu, ktorého sa týka toto vyhlásenie:
Bu bildirinin ilgili olduğu modellerin Tasarım Özellikleri:
Daikin Europe N.V.
RKXYQ8T7Y1B*,
* = , , 1, 2, 3, ..., 9
EN60335-2-40,
Machinery 2006/42/EC
Electromagnetic Compatibility 2014/30/EU
Pressure Equipment 2014/68/EU
***
*
**
CE - DECLARATION-OF-CONFORMITY CE - DECLARACION-DE-CONFORMIDAD CE - DECLARAÇÃO-DE-CONFORMIDADE CE - ERKLÆRING OM-SAMSVAR CE - IZJAVA-O-USKLAĐENOSTI CE - IZJAVA O SKLADNOSTI CE - ATITIKTIES-DEKLARACIJA
CE - KONFORMITÄTSERKLÄRUNG CE - DICHIARAZIONE-DI-CONFORMITA CE - ЗАЯВЛЕНИЕ-О-СООТВЕТСТВИИ CE - ILMOITUS-YHDENMUKAISUUDESTA CE - MEGFELELŐSÉGI-NYILATKOZAT CE - VASTAVUSDEKLARATSIOON CE - ATBILSTĪBAS-DEKLARĀCIJA
CE - DECLARATION-DE-CONFORMITE CE - ΔHΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ CE - OVERENSSTEMMELSESERKLÆRING CE - PROHLÁŠENÍ-O-SHODĚ CE - DEKLARACJA-ZGODNOŚCI CE - ДЕКЛАРАЦИЯ-ЗА-СЪОТВЕТСТВИЕ CE - VYHLÁSENIE-ZHODY
CE - CONFORMITEITSVERKLARING CE - FÖRSÄKRAN-OM-ÖVERENSTÄMMELSE CE - DECLARAŢIE-DE-CONFORMITATE CE - UYGUNLUK-BEYANI
01
02
03
04
05
06
07
08
declares under its sole responsibility that the air conditioning models to which this declaration relates:
erklärt auf seine alleinige Verantwortung daß die Modelle der Klimageräte für die diese Erklärung bestimmt ist:
déclare sous sa seule responsabilité que les appareils d'air conditionné visés par la présente déclaration:
verklaart hierbij op eigen exclusieve verantwoordelijkheid dat de airconditioning units waarop deze verklaring betrekking heeft:
declara baja su única responsabilidad que los modelos de aire acondicionado a los cuales hace referencia la declaración:
dichiara sotto sua responsabilità che i condizionatori modello a cui è riferita questa dichiarazione:
δηλώνει με αποκλειστική της ευθύνη ότι τα μοντέλα των κλιματιστικών συσκευών στα οποία αναφέρεται η παρούσα δήλωση:
declara sob sua exclusiva responsabilidade que os modelos de ar condicionado a que esta declaração se refere:
09
10
11
12
13
14
15
16
заявляет, исключительно под свою ответственность, что модели кондиционеров воздуха, к которым относится настоящее заявление:
erklærer under eneansvar, at klimaanlægmodellerne, som denne deklaration vedrører:
deklarerar i egenskap av huvudansvarig, att luftkonditioneringsmodellerna som berörs av denna deklaration innebär att:
erklærer et fullstendig ansvar for at de luftkondisjoneringsmodeller som berøres av denne deklarasjon, innebærer at:
ilmoittaa yksinomaan omalla vastuullaan, että tämän ilmoituksen tarkoittamat ilmastointilaitteiden mallit:
prohlašuje ve své plné odpovědnosti, že modely klimatizace, k nimž se toto prohlášení vztahuje:
izjavljuje pod isključivo vlastitom odgovornošću da su modeli klima uređaja na koje se ova izjava odnosi:
teljes felelőssége tudatában kijelenti, hogy a klímaberendezés modellek, melyekre e nyilatkozat vonatkozik:
17
18
19
20
21
22
23
24
25
deklaruje na własną i wyłączną odpowiedzialność, że modele klimatyzatorów, których dotyczy niniejsza deklaracja:
declară pe proprie răspundere că aparatele de aer condiţionat la care se referă această declaraţie:
z vso odgovornostjo izjavlja, da so modeli klimatskih naprav, na katere se izjava nanaša:
kinnitab oma täielikul vastutusel, et käesoleva deklaratsiooni alla kuuluvad kliimaseadmete mudelid:
декларира на своя отговорност, че моделите климатична инсталация, за които се отнася тази декларация:
visiška savo atsakomybe skelbia, kad oro kondicionavimo prietaisų modeliai, kuriems yra taikoma ši deklaracija:
ar pilnu atbildību apliecina, ka tālāk uzskaitīto modeļu gaisa kondicionētāji, uz kuriem attiecas šī deklarācija:
vyhlasuje na vlastnú zodpovednosť, že tieto klimatizačné modely, na ktoré sa vzťahuje toto vyhlásenie:
tamamen kendi sorumluluǧunda olmak üzere bu bildirinin ilgili olduǧu klima modellerinin aşaǧıdaki gibi olduǧunu beyan eder:
01
02
03
04
are in conformity with the following standard(s) or other normative
document(s), provided that these are used in accordance with our
instructions:
der/den folgenden Norm(en) oder einem anderen Normdokument oder -
dokumenten entspricht/entsprechen, unter der Voraussetzung, daß sie
gemäß unseren Anweisungen eingesetzt werden:
sont conformes à la/aux norme(s) ou autre(s) document(s) normatif(s),
pour autant qu'ils soient utilisés conformément à nos instructions:
conform de volgende norm(en) of één of meer andere bindende
documenten zijn, op voorwaarde dat ze worden gebruikt overeenkomstig
onze instructies:
05
06
07
08
están en conformidad con la(s) siguiente(s) norma(s) u otro(s)
documento(s) normativo(s), siempre que sean utilizados de acuerdo con
nuestras instrucciones:
sono conformi al(i) seguente(i) standard(s) o altro(i) documento(i) a
carattere normativo, a patto che vengano usati in conformità alle nostre
istruzioni:
είναι σύμφωνα με το(α) ακόλουθο(α) πρότυπο(α) ή άλλο έγγραφο(α)
κανονισμών, υπό την προϋπόθεση ότι χρησιμοποιούνται σύμφωνα με τις
οδηγίες μας:
estão em conformidade com a(s) seguinte(s) norma(s) ou outro(s)
documento(s) normativo(s), desde que estes sejam utilizados de acordo
com as nossas instruções:
09
10
11
соответствуют следующим стандартам или другим нормативным
документам, при условии их использования согласно нашим
инструкциям:
overholder følgende standard(er) eller andet/andre
retningsgivende dokument(er), forudsat at disse anvendes i henhold til
vore instrukser:
respektive utrustning är utförd i överensstämmelse med och
följer följande standard(er) eller andra normgivande dokument, under
förutsättning att användning sker i överensstämmelse med våra
instruktioner:
12
13
14
15
16
respektive utstyr er i overensstemmelse med følgende standard(er) eller
andre normgivende dokument(er), under forutssetning av at disse brukes
i henhold til våre instrukser:
vastaavat seuraavien standardien ja muiden ohjeellisten dokumenttien
vaatimuksia edellyttäen, että niitä käytetään ohjeidemme mukaisesti:
za předpokladu, že jsou využívány v souladu s našimi pokyny, odpovídají
následujícím normám nebo normativním dokumentům:
u skladu sa slijedećim standardom(ima) ili drugim normativnim
dokumentom(ima), uz uvjet da se oni koriste u skladu s našim uputama:
megfelelnek az alábbi szabvány(ok)nak vagy egyéb irányadó
dokumentum(ok)nak, ha azokat előírás szerint használják:
17
18
19
20
spełniają wymogi następujących norm i innych dokumentów
normalizacyjnych, pod warunkiem że używane są zgodnie z naszymi
instrukcjami:
sunt în conformitate cu următorul (următoarele) standard(e) sau alt(e)
document(e) normativ(e), cu condiţia ca acestea să fie utilizate în
conformitate cu instrucţiunile noastre:
skladni z naslednjimi standardi in drugimi normativi, pod
pogojem, da se uporabljajo v skladu z našimi navodili:
on vastavuses järgmis(t)e standardi(te)ga või teiste normatiivsete
dokumentidega, kui neid kasutatakse vastavalt meie juhenditele:
21
22
23
24
25
съответстват на следните стандарти или други нормативни
документи, при условие, че се използват съгласно нашите
инструкции:
atitinka žemiau nurodytus standartus ir (arba) kitus norminius
dokumentus su sąlyga, kad yra naudojami pagal mūsų nurodymus:
tad, ja lietoti atbilstoši ražotāja norādījumiem, atbilst sekojošiem
standartiem un citiem normatīviem dokumentiem:
sú v zhode s nasledovnou(ými) normou(ami) alebo iným(i)
normatívnym(i) dokumentom(ami), za predpokladu, že sa používajú v
súlade snašim návodom:
ürünün, talimatlarımıza göre kullanılması koşuluyla aşağıdaki standartlar
ve norm belirten belgelerle uyumludur:
01
02
03
04
05
06
07
08
09
following the provisions of:
gemäß den Vorschriften der:
conformément aux stipulations des:
overeenkomstig de bepalingen van:
siguiendo las disposiciones de:
secondo le prescrizioni per:
με τήρηση των διατάξεων των:
de acordo com o previsto em:
в соответствии с положениями:
10
11
12
13
14
15
16
17
18
under iagttagelse af bestemmelserne i:
enligt villkoren i:
gitt i henhold til bestemmelsene i:
noudattaen määräyksiä:
za dodržení ustanovení předpisu:
prema odredbama:
követi a(z):
zgodnie z postanowieniami Dyrektyw:
în urma prevederilor:
19
20
21
22
23
24
25
ob upoštevanju določb:
vastavalt nõuetele:
следвайки клаузите на:
laikantis nuostatų, pateikiamų:
ievērojot prasības, kas noteiktas:
održiavajúc ustanovenia:
bunun koşullarına uygun olarak:
01
02
03
04
05
06
07
08
09
Directives, as amended.
Direktiven, gemäß Änderung.
Directives, telles que modifiées.
Richtlijnen, zoals geamendeerd.
Directivas, según lo enmendado.
Direttive, come da modifica.
Οδηγιών, όπως έχουν τροποποιηθεί.
Directivas, conforme alteração em.
Директив со всеми поправками.
10
11
12
13
14
15
16
17
Direktiver, med senere ændringer.
Direktiv, med företagna ändringar.
Direktiver, med foretatte endringer.
Direktiivejä, sellaisina kuin ne ovat muutettuina.
v platném znění.
Smjernice, kako je izmijenjeno.
irányelv(ek) és módosításaik rendelkezéseit.
z późniejszymi poprawkami.
18
19
20
21
22
23
24
25
Directivelor, cu amendamentele respective.
Direktive z vsemi spremembami.
Direktiivid koos muudatustega.
Директиви, с техните изменения.
Direktyvose su papildymais.
Direktīvās un to papildinājumos.
Smernice, v platnom znení.
Değiştirilmiş halleriyle Yönetmelikler.
01*
**
02*
**
03*
**
04*
**
05*
**
as set out in <A> and judged positively by <B> according to the
Certificate<C>.
as set out in the Technical Construction File <D> and judged positively by
<E> (Applied module <F>). <G>. Risk category <H>. Also refer to next
page.
wie in <A> aufgeführt und von <B> positiv beurteilt gemäß
Zertifikat<C>.
wie in der Technischen Konstruktionsakte <D> aufgeführt und von <E>
(Angewandtes Modul <F>) positiv ausgezeichnet. <G>. Risikoart <H>.
Siehe auch nächste Seite.
tel que défini dans <A> et évalué positivement par <B> conformément au
Certificat<C>.
tel que stipulé dans le Fichier de Construction Technique <D> et jugé
positivement par <E> (Module appliqué <F>). <G>. Catégorie de risque
<H>. Se reporter également à la page suivante.
zoals vermeld in <A> en positief beoordeeld door <B> overeenkomstig
Certificaat<C>.
zoals vermeld in het Technisch Constructiedossier <D> en
inordebevonden door <E> (Toegepaste module <F>). <G>.
Risicocategorie <H>. Zie ook de volgende pagina.
como se establece en <A> y es valorado positivamente por <B>
deacuerdo con el Certificado<C>.
tal como se expone en el Archivo de Construcción Técnica <D>
yjuzgado positivamento por <E> (Modulo aplicado <F>). <G>. Categoría
de riesgo <H>. Consulte también la siguiente página.
06*
**
07*
**
08*
**
09*
**
10*
**
delineato nel <A> e giudicato positivamente da<B> secondo
ilCertificato<C>.
delineato nel File Tecnico di Costruzione <D> e giudicato positivamente
da <E> (Modulo <F> applicato). <G>. Categoria dirischio <H>. Fare
riferimento anche alla pagina successiva.
όπως καθορίζεται στο <A> και κρίνεται θετικά από το <B> σύμφωνα με
το Πιστοποιητικό<C>.
όπως προσδιορίζεται στο Αρχείο Τεχνικής Κατασκευής <D> και κρίνεται
θετικά από το <E> (Χρησιμοποιούμενη υπομονάδα <F>). <G>.
Κατηγορία επικινδυνότητας <H>. Ανατρέξτε επίσης στην επόμενη σελίδα.
tal como estabelecido em <A> e com o parecer positivo de <B>
deacordo com o Certificado<C>.
tal como estabelecido no Ficheiro Técnico de Construção <D> ecomo
parecer positivo de <E> (Módulo aplicado <F>). <G>. Categoria de risco
<H>. Consultar também a página seguinte.
как указано в <A> и в соответствии сположительным решением <B>
согласно Свидетельству<C>.
как указано в Досье технического топкования <D> и в соответствии
сположительным решением <E>
(Прикладной модуль <F>). <G>. Категория риска <H>. Также
смотрите следующую страницу.
som anført i <A> og positivt vurderet af <B> ihenhold til Certifikat<C>.
som anført i den Tekniske Konstruktionsfil <D> og positivt vurderet af
<E> (Anvendt modul <F>). <G>. Risikoklasse <H>. Se også næste side.
11*
**
12*
**
13*
**
14*
**
15*
**
enligt <A> och godkänts av <B> enligt Certifikatet<C>.
i enlighet med den Tekniska Konstruktionsfilen <D> som positivt intygats
av <E> (Fastsatt modul <F>). <G>. Riskkategori <H>. Seäven nästa
sida.
som det fremkommer i <A> og gjennom positiv bedømmelse av <B>
ifølge Sertifikat<C>.
som det fremkommer i den Tekniske Konstruksjonsfilen <D> og gjennom
positiv bedømmelse av <E> (Anvendt modul <F>). <G>. Risikokategori
<H>. Se også neste side.
jotka on esitetty asiakirjassa <A> ja jotka <B> on hyväksynyt
Sertifikaatin<C> mukaisesti.
jotka on esitetty Teknisessä Asiakirjassa <D> ja jotka <E> on hyväksynyt
(Sovellettu moduli <F>). <G>. Vaaraluokka <H>. Katsomyös seuraava
sivu.
jak bylo uvedeno v <A> a pozitivně zjištěno <B> vsouladu
sosvědčením<C>.
jak bylo uvedeno v souboru technické konstrukce <D> a pozitivně
zjištěno <E> (použitý modul <F>). <G>. Kategorie rizik <H>.
Viztakénásledující strana.
kako je izloženo u <A> i pozitivno ocijenjeno odstrane <B> prema
Certifikatu<C>.
kako je izloženo u Datoteci o tehničkoj konstrukciji <D> i pozitivno
ocijenjeno od strane <E> (Primijenjen modul <F>). <G>. Kategorija
opasnosti <H>. Također pogledajte na slijedećoj stranici.
16*
**
17*
**
18*
**
19*
**
20*
**
a(z) <A> alapján, a(z) <B> igazolta a megfelelést, a(z) <C>tanúsítvány
szerint.
a(z) <D> műszaki konstrukciós dokumentáció alapján, a(z) <E> igazolta
a megfelelést (alkalmazott modul: <F>). <G>. Veszélyességikategória
<H>. Lásd még a következő oldalon.
zgodnie z dokumentacją <A>, pozytywną opinią <B> i
Świadectwem<C>.
zgodnie z archiwalną dokumentacją konstrukcyjną <D> i pozytywną
opinią <E> (Zastosowany moduł <F>). <G>. Kategoria zagrożenia<H>.
Patrz także następna strona.
aşa cum este stabilit în <A> şi apreciat pozitiv de<B> în conformitate cu
Certificatul<C>.
conform celor stabilite în Dosarul tehnic de construcţie <D> şiapreciate
pozitiv de<E> (Modul aplicat <F>). <G>. Categorie derisc<H>.
Consultaţi de asemenea pagina următoare.
kot je določeno v <A> in odobreno s strani <B> vskladu
scertifikatom<C>.
kot je določeno v tehnični mapi <D> in odobreno s strani <E> (Uporabljen
modul <F>). <G>. Kategorija tveganja <H>. Glejtetudinanaslednji
strani.
nagu on näidatud dokumendis <A> ja heaks kiidetud <B> järgi vastavalt
sertifikaadile<C>.
nagu on näidatud tehnilises dokumentatsioonis <D> ja heaks kiidetud
<E> järgi (lisamoodul <F>). <G>. Riskikategooria <H>. Vaadake ka
järgmist lehekülge.
21*
**
22*
**
23*
**
24*
**
25*
**
както е изложено в <A> и оценено положително от <B> съгласно
Сертификата<C>.
както е заложено в Акта за техническа конструкция <D> и оценено
положително от <E> (Приложен модул <F>). <G>. Категория риск
<H>. Вижте също на следващата страница.
kaip nustatyta <A> ir kaip teigiamai nuspręsta <B> pagal
Sertifikatą<C>.
kaip nurodyta Techninėje konstrukcijos byloje <D> ir patvirtinta <E>
(taikomas modulis <F>). <G>. Rizikos kategorija <H>. Taip pat žiūrėkite ir
kitą puslapį.
kā norādīts <A> un atbilstoši <B> pozitīvajam vērtējumam saskaņā
arsertifikātu<C>.
kā noteikts tehniskajā dokumentācijā <D>, atbilstoši <E> pozitīvajam
lēmumam (piekritīgā sadaĮa: <F>). <G>. Riska kategorija <H>. Skat. arī
nākošo lappusi.
ako bolo uvedené v <A> a pozitívne zistené <B> vsúlade
sosvedčením<C>.
ako je to stanovené v Súbore technickej konštrukcie <D> a kladne
posúdené <E> (Aplikovaný modul <F>). <G>. Kategória nebezpečia <H>.
Viď tiež nasledovnú stranu.
<A>’da belirtildiği gibi ve <C>Sertifikasına göre <B> tarafından olumlu
olarak değerlendirildiği gibi.
<D> Teknik Yapı Dosyasında belirtildiği gibi ve <E> tarafından
olumluolarak (Uygulanan modül <F>) değerlendirilmiştir. <G>.
Riskkategorisi <H>. Ayrıca bir sonraki sayfaya bakın.
<A>
<B>
<C>
TÜV (NB1856)
12080901.T30
DAIKIN.TCF.030A30/04-2017
<D> Daikin.TCFP.001
<E> VINÇOTTE nv (NB0026)
<F> D1
<G> —
II
<H>
01***
02***
03***
04***
05***
06***
Daikin Europe N.V. is authorised to compile the Technical Construction File.
Daikin Europe N.V. hat die Berechtigung die Technische Konstruktionsakte zusammenzustellen.
Daikin Europe N.V. est autorisé à compiler le Dossier de Construction Technique.
Daikin Europe N.V. is bevoegd om het Technisch Constructiedossier samen te stellen.
Daikin Europe N.V. está autorizado a compilar el Archivo de Construcción Técnica.
Daikin Europe N.V. è autorizzata a redigere il File Tecnico di Costruzione.
07***
08***
09***
10***
11***
12***
Η Daikin Europe N.V. είναι εξουσιοδοτημένη να συντάξει τον Τεχνικό φάκελο κατασκευής.
A Daikin Europe N.V. está autorizada a compilar a documentação técnica de fabrico.
Компания Daikin Europe N.V. уполномочена составить Комплект технической документации.
Daikin Europe N.V. er autoriseret til at udarbejde de tekniske konstruktionsdata.
Daikin Europe N.V. är bemyndigade att sammanställa den tekniska konstruktionsfilen.
Daikin Europe N.V. har tillatelse til å kompilere den Tekniske konstruksjonsfilen.
13***
14***
15***
16***
17***
18***
Daikin Europe N.V. on valtuutettu laatimaan Teknisen asiakirjan.
Společnost Daikin Europe N.V. má oprávnění ke kompilaci souboru technické konstrukce.
Daikin Europe N.V. je ovlašten za izradu Datoteke o tehničkoj konstrukciji.
A Daikin Europe N.V. jogosult a műszaki konstrukciós dokumentáció összeállítására.
Daikin Europe N.V. ma upoważnienie do zbierania i opracowywania dokumentacji konstrukcyjnej.
Daikin Europe N.V. este autorizat să compileze Dosarul tehnic de construcţie.
19***
20***
21***
22***
23***
24***
25***
Daikin Europe N.V. je pooblaščen za sestavo datoteke s tehnično mapo.
Daikin Europe N.V. on volitatud koostama tehnilist dokumentatsiooni.
Daikin Europe N.V. е оторизирана да състави Акта за техническа конструкция.
Daikin Europe N.V. yra įgaliota sudaryti šį techninės konstrukcijos failą.
Daikin Europe N.V. ir autorizēts sastādīt tehnisko dokumentāciju.
Spoločnosť Daikin Europe N.V. je oprávnená vytvoriť súbor technickej konštrukcie.
Daikin Europe N.V. Teknik Yapı Dosyasını derlemeye yetkilidir.
2PW51591-6F
01
02
03
04
05
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maximum allowable pressure (PS): <K> (bar)
Minimum/maximum allowable temperature (TS*):
*TSmin: Minimum temperature at low pressure
side: <L> (°C)
*TSmax: Saturated temperature corresponding
with the maximum allowable pressure (PS): <M>
(°C)
Refrigerant: <N>
Setting of pressure safety device: <P> (bar)
Manufacturing number and manufacturing year:
refer to model nameplate
Maximal zulässiger Druck (PS): <K> (Bar)
Minimal/maximal zulässige Temperatur (TS*):
*TSmin: Mindesttemperatur auf der
Niederdruckseite: <L> (°C)
*TSmax: Sättigungstemperatur die dem maximal
zulässigen Druck (PS) entspricht: <M> (°C)
Kältemittel: <N>
Einstellung der Druck-Schutzvorrichtung: <P>
(Bar)
Herstellungsnummer und Herstellungsjahr: siehe
Typenschild desModells
Pression maximale admise (PS): <K> (bar)
Température minimum/maximum admise (TS*):
*TSmin: température minimum côté basse
pression: <L> (°C)
*TSmax: température saturée correspondant à la
pression maximale admise (PS): <M> (°C)
Réfrigérant: <N>
Réglage du dispositif de sécurité de pression:
<P> (bar)
Numéro de fabrication et année de fabrication: se
reporter à la plaquette signalétique du modèle
Maximaal toelaatbare druk (PS): <K> (bar)
Minimaal/maximaal toelaatbare temperatuur
(TS*):
*TSmin: Minimumtemperatuur aan lagedrukzijde:
<L> (°C)
*TSmax: Verzadigde temperatuur die
overeenstemt met de maximaal toelaatbare druk
(PS): <M> (°C)
Koelmiddel: <N>
Instelling van drukbeveiliging: <P> (bar)
Fabricagenummer en fabricagejaar: zie
naamplaat model
Presión máxima admisible (PS): <K> (bar)
Temperatura mínima/máxima admisible (TS*):
*TSmin: Temperatura mínima en el lado de baja
presión: <L> (°C)
*TSmax: Temperatura saturada correspondiente
a la presión máxima admisible (PS): <M> (°C)
Refrigerante: <N>
Ajuste del presostato de seguridad: <P> (bar)
Número de fabricación y año de fabricación:
consulte la placa deespecificaciones técnicas del
modelo
06
07
08
09
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Pressione massima consentita (PS): <K> (bar)
Temperatura minima/massima consentita (TS*):
*TSmin: temperatura minima nel lato di bassa
pressione: <L> (°C)
*TSmax: temperatura satura corrispondente alla
pressione massima consentita (PS): <M> (°C)
Refrigerante: <N>
Impostazione del dispositivo di controllo della
pressione: <P> (bar)
Numero di serie e anno di produzione: fare
riferimento alla targhetta del modello
Mέγιστη επιτρεπόμενη πίεση (PS): <K> (bar)
Ελάχιστη/μέγιστη επιτρεπόμενη θερμοκρασία
(TS*):
*TSmin: Ελάχιστη θερμοκρασία για την πλευρά
χαμηλής πίεσης: <L> (°C)
*TSmax: Κορεσμένη θερμοκρασία που
αντιστοιχεί με τη μέγιστη επιτρεπόμενη πίεση
(PS): <M> (°C)
Ψυκτικό: <N>
Ρύθμιση της διάταξης ασφάλειας πίεσης: <P>
(bar)
Αριθμός κατασκευής και έτος κατασκευής:
ανατρέξτε στην πινακίδα αναγνώρισης του
μοντέλου
Pressão máxima permitida (PS): <K> (bar)
Temperaturas mínima e máxima permitidas
(TS*):
*TSmin: Temperatura mínima em baixa pressão:
<L> (°C)
*TSmax: Temperatura de saturação
correspondente à pressão máxima permitida
(PS): <M> (°C)
Refrigerante: <N>
Regulação do dispositivo de segurança da
pressão: <P> (bar)
Número e ano de fabrico: consultar a placa de
especificações daunidade
Максимально допустимое давление (PS): <K>
(бар)
Минимально/Максимально допустимая
температура (TS*):
*TSmin: Минимальная температура на
стороне низкого давления: <L> (°C)
*TSmax: Температура кипения,
соответствующая максимально допустимому
давлению (PS): <M> (°C)
Хладагент: <N>
Настройка устройства защиты по давлению:
<P> (бар)
Заводской номер и год изготовления:
смотрите паспортную табличку модели
10
11
12
13
14
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maks. tilladt tryk (PS): <K> (bar)
Min./maks. tilladte temperatur (TS*):
*TSmin: Min. temperatur på lavtrykssiden: <L>
(°C)
*TSmax: Mættet temperatur svarende til maks.
tilladte tryk (PS): <M> (°C)
Kølemiddel: <N>
Indstilling af tryksikringsudstyr: <P> (bar)
Produktionsnummer og fremstillingsår: se
modellens fabriksskilt
Maximalt tillåtet tryck (PS): <K> (bar)
Min/max tillåten temperatur (TS*):
*TSmin: Minimumtemperatur på lågtryckssidan:
<L> (°C)
*TSmax: Mättnadstemperatur som motsvarar
maximalt tillåtet tryck (PS): <M> (°C)
Köldmedel: <N>
Inställning för trycksäkerhetsenhet: <P> (bar)
Tillverkningsnummer och tillverkningsår: se
modellens namnplåt
Maksimalt tillatt trykk (PS): <K> (bar)
Minimalt/maksimalt tillatt temperatur (TS*):
*TSmin: Minimumstemperatur på lavtrykkssiden:
<L> (°C)
*TSmax: Metningstemperatur i samsvar med
maksimalt tillatt trykk (PS): <M> (°C)
Kjølemedium: <N>
Innstilling av sikkerhetsanordning for trykk: <P>
(bar)
Produksjonsnummer og produksjonsår: se
modellens merkeplate
Suurin sallittu paine (PS): <K> (bar)
Pienin/suurin sallittu lämpötila (TS*):
*TSmin: Alhaisin matalapainepuolen lämpötila:
<L> (°C)
*TSmax: Suurinta sallittua painetta (PS)
vastaava kyllästyslämpötila: <M> (°C)
Kylmäaine: <N>
Varmuuspainelaitteen asetus: <P> (bar)
Valmistusnumero ja valmistusvuosi: katso mallin
nimikilpi
Maximální přípustný tlak (PS): <K> (bar)
Minimální/maximální přípustná teplota (TS*):
*TSmin: Minimální teplota na nízkotlaké straně:
<L> (°C)
*TSmax: Saturovaná teplota odpovídající
maximálnímu přípustnému tlaku (PS): <M> (°C)
Chladivo: <N>
Nastavení bezpečnostního tlakového zařízení:
<P> (bar)
Výrobní číslo a rok výroby: viz typový štítek
modelu
15
16
17
18
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Najveći dopušten tlak (PS): <K> (bar)
Najniža/najviša dopuštena temperatura (TS*):
*TSmin: Najniža temperatura u području niskog
tlaka: <L> (°C)
*TSmax: Standardna temperatura koja odgovara
najvećem dopuštenom tlaku (PS): <M> (°C)
Rashladno sredstvo: <N>
Postavke sigurnosne naprave za tlak: <P> (bar)
Proizvodni broj i godina proizvodnje: pogledajte
natpisnu pločicu modela
Legnagyobb megengedhető nyomás (PS): <K>
(bar)
Legkisebb/legnagyobb megengedhető
hőmérséklet (TS*):
*TSmin: Legkisebb megengedhető hőmérséklet
a kis nyomású oldalon: <L> (°C)
*TSmax: A legnagyobb megengedhető
nyomásnak (PS) megfelelő telítettségi
hőmérséklet: <M> (°C)
Hűtőközeg: <N>
A túlnyomás-kapcsoló beállítása: <P> (bar)
Gyártási szám és gyártási év: lásd a berendezés
adattábláján
Maksymalne dopuszczalne ciśnienie (PS): <K>
(bar)
Minimalna/maksymalna dopuszczalna
temperatura (TS*):
*TSmin: Minimalna temperatura po stronie
niskociśnieniowej: <L> (°C)
*TSmax: Temperatura nasycenia odpowiadająca
maksymalnemu dopuszczalnemu ciśnieniu (PS):
<M> (°C)
Czynnik chłodniczy: <N>
Nastawa ciśnieniowego urządzenia
bezpieczeństwa: <P> (bar)
Numer fabryczny oraz rok produkcji: patrz
tabliczka znamionowa modelu
Presiune maximă admisibilă (PS): <K> (bar)
Temperatură minimă/maximă admisibilă (TS*):
*TSmin: Temperatură minimă pe partea de
presiune joasă: <L> (°C)
*TSmax: Temperatură de saturaţie
corespunzând presiunii maxime admisibile (PS):
<M> (°C)
Agent frigorific: <N>
Reglarea dispozitivului de siguranţă pentru
presiune: <P> (bar)
Numărul de fabricaţie şi anul de fabricaţie:
consultaţi placa de identificare a modelului
19
20
21
22
23
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maksimalni dovoljeni tlak (PS): <K> (bar)
Minimalna/maksimalna dovoljena temperatura
(TS*):
*TSmin: Minimalna temperatura na nizkotlačni
strani: <L> (°C)
*TSmax: Nasičena temperatura, ki ustreza
maksimalnemu dovoljenemu tlaku (PS): <M> (°C)
Hladivo: <N>
Nastavljanje varnostne naprave za tlak: <P> (bar)
Tovarniška številka in leto proizvodnje: glejte
napisno ploščico
Maksimaalne lubatud surve (PS): <K> (bar)
Minimaalne/maksimaalne lubatud temperatuur
(TS*):
*TSmin: Minimaalne temperatuur madalsurve
küljel: <L> (°C)
*TSmax: Maksimaalsele lubatud survele (PS)
vastav küllastunud temperatuur: <M> (°C)
Jahutusaine: <N>
Surve turvaseadme seadistus: <P> (bar)
Tootmisnumber ja tootmisaasta: vaadake mudeli
andmeplaati
Максимално допустимо налягане (PS): <K>
(bar)
Минимално/максимално допустима
температура (TS*):
*TSmin: Минимална температура от страната
на ниското налягане: <L> (°C)
*TSmax: Температура на насищане,
съответстваща на максимално допустимото
налягане (PS): <M> (°C)
Охладител: <N>
Настройка на предпазното устройство за
налягане: <P> (bar)
Фабричен номер и година на производство:
вижте табелката намодела
Maksimalus leistinas slėgis (PS): <K> (bar)
Minimali/maksimali leistina temperatūra (TS*):
*TSmin: Minimali temperatūra žemo slėgio
pusėje: <L> (°C)
*TSmax: Prisotinta temperatūra, atitinkamti
maksimalų leistiną slėgį (PS): <M> (°C)
Šaldymo skystis: <N>
Apsauginio slėgio prietaiso nustatymas: <P>
(bar)
Gaminio numeris ir pagaminimo metai: žiūrėkite
modelio pavadinimo plokštelę
Maksimālais pieļaujamais spiediens (PS): <K>
(bar)
Minimālā/maksimālā pieļaujamā temperatūra
(TS*):
*TSmin: Minimālā temperatūra zemā spiediena
pusē: <L> (°C)
*TSmax: Piesātinātā temperatūra saskaņā ar
maksimālo pieļaujamo spiedienu (PS): <M> (°C)
Dzesinātājs: <N>
Spiediena drošības ierīces iestatīšana: <P> (bar)
Izgatavošanas numurs un izgatavošanas gads:
skat. modeļa izgatavotājuzņēmuma plāksnītie
24
25
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maximálny povolený tlak (PS): <K> (bar)
Minimálna/maximálna povolená teplota (TS*):
*TSmin: Minimálna teplota na nízkotlakovej
strane: <L> (°C)
*TSmax: Nasýtená teplota korešpondujúca s
maximálnym povoleným tlakom (PS): <M> (°C)
Chladivo: <N>
Nastavenie tlakového poistného zariadenia: <P>
(bar)
Výrobné číslo a rok výroby: nájdete na výrobnom
štítku modelu
İzin verilen maksimum basınç (PS): <K> (bar)
İzin verilen minimum/maksimum sıcaklık (TS*):
*TSmin: Düşük basınç tarafındaki minimum
sıcaklık: <L> (°C)
*TSmax: İzin verilen maksimum basınca (PS)
karşı gelen doyma sıcaklığı: <M> (°C)
Soğutucu: <N>
Basınç emniyet düzeninin ayarı: <P> (bar)
İmalat numarası ve imalat yılı: modelin ünite
plakasına bakın
01
02
03
04
05
Name and address of the Notified body that
judged positively oncompliance with the
Pressure Equipment Directive: <Q>
Name und Adresse der benannten Stelle, die
positiv unter Einhaltung der Druckanlagen-
Richtlinie urteilte: <Q>
Nom et adresse de l’organisme notifié qui a
évalué positivement la conformité à la directive
sur l’équipement de pression: <Q>
Naam en adres van de aangemelde instantie die
positief geoordeeld heeft over de conformiteit met
de Richtlijn Drukapparatuur: <Q>
Nombre y dirección del Organismo Notificado
que juzgó positivamente el cumplimiento con la
Directiva en materia de Equipos de Presión: <Q>
06
07
08
09
Nome e indirizzo dell’Ente riconosciuto che ha
riscontrato la conformità alla Direttiva sulle
apparecchiature a pressione: <Q>
Όνομα και διεύθυνση του Κοινοποιημένου
οργανισμού που απεφάνθη θετικά για τη
συμμόρφωση προς την Οδηγία Εξοπλισμών υπό
Πίεση: <Q>
Nome e morada do organismo notificado, que
avaliou favoravelmente a conformidade com a
directiva sobre equipamentos pressurizados: <Q>
Название и адрес органа технической
экспертизы, принявшего положительное
решение о соответствии Директиве об
оборудовании под давлением: <Q>
10
11
12
13
Navn og adresse på bemyndiget organ, der har
foretaget en positiv bedømmelse af, at udstyret
lever op til kravene i PED (Direktiv for
Trykbærende Udstyr): <Q>
Namn och adress för det anmälda organ som
godkänt uppfyllandet av
tryckutrustningsdirektivet: <Q>
Navn på og adresse til det autoriserte organet
som positivt bedømte samsvar med direktivet for
trykkutstyr (Pressure Equipment Directive): <Q>
Sen ilmoitetun elimen nimi ja osoite, joka teki
myönteisen päätöksen painelaitedirektiivin
noudattamisesta: <Q>
14
15
16
17
18
Název a adresa informovaného orgánu, který
vydal pozitivní posouzení shody se směrnicí o
tlakových zařízeních: <Q>
Naziv i adresa prijavljenog tijela koje je donijelo
pozitivnu prosudbu o usklađenosti sa Smjernicom
za tlačnu opremu: <Q>
A nyomástartó berendezésekre vonatkozó
irányelvnek való megfelelőséget igazoló
bejelentett szervezet neve és címe: <Q>
Nazwa i adres Jednostki notyfikowanej, która
wydała pozytywną opinię dotyczącą spełnienia
wymogów Dyrektywy dot. Urządzeń
Ciśnieniowych: <Q>
Denumirea şi adresa organismului notificat care a
apreciat pozitiv conformarea cu Directiva privind
echipamentele sub
presiune: <Q>
19
20
21
22
23
Ime in naslov organa za ugotavljanje skladnosti,
ki je pozitivno ocenil združljivost z Direktivo o
tlačni opremi: <Q>
Teavitatud organi, mis hindas Surveseadmete
Direktiiviga ühilduvust positiivselt, nimi ja
aadress: <Q>
Наименование и адрес на упълномощения
орган, който сеепроизнесъл положително
относно съвместимостта сДирективата за
оборудване под налягане: <Q>
Atsakingos institucijos, kuri davė teigiamą
sprendimą pagal slėginės įrangos direktyvą
pavadinimas ir adresas: <Q>
Sertifikācijas institūcijas, kura ir devusi pozitīvu
slēdzienu par atbilstību Spiediena lekārtu
Direktīvai, nosaukums un
adrese: <Q>
24
25
Názov a adresa certifikačného úradu, ktorý
kladne posúdil zhodu so smernicou pre tlakové
zariadenia: <Q>
Basınçlı Teçhizat Direktifine uygunluk hususunda
olumlu olarak değerlendirilen Onaylanmış
kuruluşun adı ve adresi: <Q>
01**
*
02**
*
03**
*
04**
*
05**
*
06**
*
Daikin Europe N.V. is authorised to compile the Technical Construction
File.
Daikin Europe N.V. hat die Berechtigung die Technische
Konstruktionsakte zusammenzustellen.
Daikin Europe N.V. est autorisé à compiler le Dossier de Construction
Technique.
Daikin Europe N.V. is bevoegd om het Technisch Constructiedossier
samen te stellen.
Daikin Europe N.V. está autorizado a compilar el Archivo de Construcción
Técnica.
Daikin Europe N.V. è autorizzata a redigere il File Tecnico di Costruzione.
07**
*
08**
*
09**
*
10**
*
11**
*
12**
*
Η Daikin Europe N.V. είναι εξουσιοδοτημένη να συντάξει τον Τεχνικό φάκελο
κατασκευής.
A Daikin Europe N.V. está autorizada a compilar a documentação técnica
de fabrico.
Компания Daikin Europe N.V. уполномочена составить Комплект
технической документации.
Daikin Europe N.V. er autoriseret til at udarbejde de tekniske
konstruktionsdata.
Daikin Europe N.V. är bemyndigade att sammanställa den tekniska
konstruktionsfilen.
Daikin Europe N.V. har tillatelse til å kompilere den Tekniske
konstruksjonsfilen.
13**
*
14**
*
15**
*
16**
*
17**
*
18**
*
Daikin Europe N.V. on valtuutettu laatimaan Teknisen asiakirjan.
Společnost Daikin Europe N.V. má oprávnění ke kompilaci souboru
technické konstrukce.
Daikin Europe N.V. je ovlašten za izradu Datoteke o tehničkoj konstrukciji.
A Daikin Europe N.V. jogosult a műszaki konstrukciós dokumentáció
összeállítására.
Daikin Europe N.V. ma upoważnienie do zbierania i opracowywania
dokumentacji konstrukcyjnej.
Daikin Europe N.V. este autorizat să compileze Dosarul tehnic de
construcţie.
19**
*
20**
*
21**
*
22**
*
23**
*
24**
*
25**
*
Daikin Europe N.V. je pooblaščen za sestavo datoteke s tehnično
mapo.
Daikin Europe N.V. on volitatud koostama tehnilist dokumentatsiooni.
Daikin Europe N.V. е оторизирана да състави Акта за техническа
конструкция.
Daikin Europe N.V. yra įgaliota sudaryti šį techninės konstrukcijos
failą.
Daikin Europe N.V. ir autorizēts sastādīt tehnisko dokumentāciju.
Spoločnosť Daikin Europe N.V. je oprávnená vytvoriť súbor
technickej konštrukcie.
Daikin Europe N.V. Teknik Yapı Dosyasını derlemeye yetkilidir.
CE - DECLARATION-OF-CONFORMITY CE - DECLARACION-DE-CONFORMIDAD CE - DECLARAÇÃO-DE-CONFORMIDADE CE - ERKLÆRING OM-SAMSVAR CE - IZJAVA-O-USKLAĐENOSTI CE - IZJAVA O SKLADNOSTI CE - ATITIKTIES-DEKLARACIJA
CE - KONFORMITÄTSERKLÄRUNG CE - DICHIARAZIONE-DI-CONFORMITA CE - ЗАЯВЛЕНИЕ-О-СООТВЕТСТВИИ CE - ILMOITUS-YHDENMUKAISUUDESTA CE - MEGFELELŐSÉGI-NYILATKOZAT CE - VASTAVUSDEKLARATSIOON CE - ATBILSTĪBAS-DEKLARĀCIJA
CE - DECLARATION-DE-CONFORMITE CE - ΔHΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ CE - OVERENSSTEMMELSESERKLÆRING CE - PROHLÁŠENÍ-O-SHODĚ CE - DEKLARACJA-ZGODNOŚCI CE - ДЕКЛАРАЦИЯ-ЗА-СЪОТВЕТСТВИЕ CE - VYHLÁSENIE-ZHODY
CE - CONFORMITEITSVERKLARING CE - FÖRSÄKRAN-OM-ÖVERENSTÄMMELSE CE - DECLARAŢIE-DE-CONFORMITATE CE - UYGUNLUK-BEYANI
01 continuation of previous page:
02 Fortsetzung der vorherigen Seite:
03 suite de la page précédente:
04 vervolg van vorige pagina:
05 continuación de la página anterior:
06 continua dalla pagina precedente:
07 συνέχεια από την προηγούμενη σελίδα:
08 continuação da página anterior:
09 продолжение предыдущей страницы:
10 fortsat fra forrige side:
11 fortsättning från föregående sida:
12 fortsettelse fra forrige side:
13 jatkoa edelliseltä sivulta:
14 pokračování z předchozí strany:
15 nastavak s prethodne stranice:
16 folytatás az előző oldalról:
17 ciąg dalszy z poprzedniej strony:
18 continuarea paginii anterioare:
19 nadaljevanje s prejšnje strani:
20 eelmise lehekülje järg:
21 продължение от предходната страница:
22 ankstesnio puslapio tęsinys:
23 iepriekšējās lappuses turpinājums:
24 pokračovanie z predchádzajúcej strany:
25 önceki sayfadan devam:
01
02
03
04
05
06
Design Specifications of the models to which this declaration relates:
Konstruktionsdaten der Modelle auf die sich diese Erklärung bezieht:
Spécifications de conception des modèles auxquels se rapporte cette déclaration:
Ontwerpspecificaties van de modellen waarop deze verklaring betrekking heeft:
Especificaciones de diseño de los modelos a los cuales hace referencia esta declaración:
Specifiche di progetto dei modelli cui fa riferimento la presente dichiarazione:
07
08
09
10
11
12
Προδιαγραφές Σχεδιασμού των μοντέλων με τα οποία σχετίζεται η δήλωση:
Especificações de projecto dos modelos a que se aplica esta declaração:
Проектные характеристики моделей, к которым относится настоящее заявление:
Typespecifikationer for de modeller, som denne erklæring vedrører:
Designspecifikationer för de modeller som denna deklaration gäller:
Konstruksjonsspesifikasjoner for de modeller som berøres av denne deklarasjonen:
13
14
15
16
17
18
19
Tätä ilmoitusta koskevien mallien rakennemäärittely:
Specifikace designu modelů, ke kterým se vztahuje toto prohlášení:
Specifikacije dizajna za modele na koje se ova izjava odnosi:
A jelen nyilatkozat tárgyát képező modellek tervezési jellemzői:
Specyfikacje konstrukcyjne modeli, których dotyczy deklaracja:
Specificaţiile de proiectare ale modelelor la care se referă această declaraţie:
Specifikacije tehničnega načrta za modele, na katere se nanaša ta deklaracija:
20
21
22
23
24
25
Deklaratsiooni alla kuuluvate mudelite disainispetsifikatsioonid:
Проектни спецификации на моделите, за които се отнася декларацията:
Konstrukcinės specifikacijos modelių, kurie susiję su šia deklaracija:
To modeļu dizaina specifikācijas, uz kurām attiecas šī deklarācija:
Konštrukčné špecifikácie modelu, ktorého sa týka toto vyhlásenie:
Bu bildirinin ilgili olduğu modellerin Tasarım Özellikleri:
01
02
03
04
05
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maximum allowable pressure (PS): <K> (bar)
Minimum/maximum allowable temperature (TS*):
*TSmin: Minimum temperature at low pressure side: <L> (°C)
*TSmax: Saturated temperature corresponding with the maximum
allowable pressure (PS): <M> (°C)
Refrigerant: <N>
Setting of pressure safety device: <P> (bar)
Manufacturing number and manufacturing year: refer to model nameplate
Maximal zulässiger Druck (PS): <K> (Bar)
Minimal/maximal zulässige Temperatur (TS*):
*TSmin: Mindesttemperatur auf der Niederdruckseite: <L> (°C)
*TSmax: Sättigungstemperatur die dem maximal zulässigen Druck (PS)
entspricht: <M> (°C)
Kältemittel: <N>
Einstellung der Druck-Schutzvorrichtung: <P> (Bar)
Herstellungsnummer und Herstellungsjahr: siehe Typenschild
desModells
Pression maximale admise (PS): <K> (bar)
Température minimum/maximum admise (TS*):
*TSmin: température minimum côté basse pression: <L> (°C)
*TSmax: température saturée correspondant à la pression maximale
admise (PS): <M> (°C)
Réfrigérant: <N>
Réglage du dispositif de sécurité de pression: <P> (bar)
Numéro de fabrication et année de fabrication: se reporter à la plaquette
signalétique du modèle
Maximaal toelaatbare druk (PS): <K> (bar)
Minimaal/maximaal toelaatbare temperatuur (TS*):
*TSmin: Minimumtemperatuur aan lagedrukzijde: <L> (°C)
*TSmax: Verzadigde temperatuur die overeenstemt met de maximaal
toelaatbare druk (PS): <M> (°C)
Koelmiddel: <N>
Instelling van drukbeveiliging: <P> (bar)
Fabricagenummer en fabricagejaar: zie naamplaat model
Presión máxima admisible (PS): <K> (bar)
Temperatura mínima/máxima admisible (TS*):
*TSmin: Temperatura mínima en el lado de baja presión: <L> (°C)
*TSmax: Temperatura saturada correspondiente a la presión máxima
admisible (PS): <M> (°C)
Refrigerante: <N>
Ajuste del presostato de seguridad: <P> (bar)
Número de fabricación y año de fabricación: consulte la placa
deespecificaciones técnicas del modelo
06
07
08
09
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Pressione massima consentita (PS): <K> (bar)
Temperatura minima/massima consentita (TS*):
*TSmin: temperatura minima nel lato di bassa pressione: <L> (°C)
*TSmax: temperatura satura corrispondente alla pressione massima
consentita (PS): <M> (°C)
Refrigerante: <N>
Impostazione del dispositivo di controllo della pressione: <P> (bar)
Numero di serie e anno di produzione: fare riferimento alla targhetta del
modello
Mέγιστη επιτρεπόμενη πίεση (PS): <K> (bar)
Ελάχιστη/μέγιστη επιτρεπόμενη θερμοκρασία (TS*):
*TSmin: Ελάχιστη θερμοκρασία για την πλευρά χαμηλής πίεσης: <L>
(°C)
*TSmax: Κορεσμένη θερμοκρασία που αντιστοιχεί με τη μέγιστη
επιτρεπόμενη πίεση (PS): <M> (°C)
Ψυκτικό: <N>
Ρύθμιση της διάταξης ασφάλειας πίεσης: <P> (bar)
Αριθμός κατασκευής και έτος κατασκευής: ανατρέξτε στην πινακίδα
αναγνώρισης του μοντέλου
Pressão máxima permitida (PS): <K> (bar)
Temperaturas mínima e máxima permitidas (TS*):
*TSmin: Temperatura mínima em baixa pressão: <L> (°C)
*TSmax: Temperatura de saturação correspondente à pressão máxima
permitida (PS): <M> (°C)
Refrigerante: <N>
Regulação do dispositivo de segurança da pressão: <P> (bar)
Número e ano de fabrico: consultar a placa de especificações
daunidade
Максимально допустимое давление (PS): <K> (бар)
Минимально/Максимально допустимая температура (TS*):
*TSmin: Минимальная температура на стороне низкого давления:
<L> (°C)
*TSmax: Температура кипения, соответствующая максимально
допустимому давлению (PS): <M> (°C)
Хладагент: <N>
Настройка устройства защиты по давлению: <P> (бар)
Заводской номер и год изготовления: смотрите паспортную табличку
модели
10
11
12
13
14
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maks. tilladt tryk (PS): <K> (bar)
Min./maks. tilladte temperatur (TS*):
*TSmin: Min. temperatur på lavtrykssiden: <L> (°C)
*TSmax: Mættet temperatur svarende til maks. tilladte tryk (PS): <M>
(°C)
Kølemiddel: <N>
Indstilling af tryksikringsudstyr: <P> (bar)
Produktionsnummer og fremstillingsår: se modellens fabriksskilt
Maximalt tillåtet tryck (PS): <K> (bar)
Min/max tillåten temperatur (TS*):
*TSmin: Minimumtemperatur på lågtryckssidan: <L> (°C)
*TSmax: Mättnadstemperatur som motsvarar maximalt tillåtet tryck (PS):
<M> (°C)
Köldmedel: <N>
Inställning för trycksäkerhetsenhet: <P> (bar)
Tillverkningsnummer och tillverkningsår: se modellens namnplåt
Maksimalt tillatt trykk (PS): <K> (bar)
Minimalt/maksimalt tillatt temperatur (TS*):
*TSmin: Minimumstemperatur på lavtrykkssiden: <L> (°C)
*TSmax: Metningstemperatur i samsvar med maksimalt tillatt trykk (PS):
<M> (°C)
Kjølemedium: <N>
Innstilling av sikkerhetsanordning for trykk: <P> (bar)
Produksjonsnummer og produksjonsår: se modellens merkeplate
Suurin sallittu paine (PS): <K> (bar)
Pienin/suurin sallittu lämpötila (TS*):
*TSmin: Alhaisin matalapainepuolen lämpötila: <L> (°C)
*TSmax: Suurinta sallittua painetta (PS) vastaava kyllästyslämpötila:
<M> (°C)
Kylmäaine: <N>
Varmuuspainelaitteen asetus: <P> (bar)
Valmistusnumero ja valmistusvuosi: katso mallin nimikilpi
Maximální přípustný tlak (PS): <K> (bar)
Minimální/maximální přípustná teplota (TS*):
*TSmin: Minimální teplota na nízkotlaké straně: <L> (°C)
*TSmax: Saturovaná teplota odpovídající maximálnímu přípustnému
tlaku (PS): <M> (°C)
Chladivo: <N>
Nastavení bezpečnostního tlakového zařízení: <P> (bar)
Výrobní číslo a rok výroby: viz typový štítek modelu
15
16
17
18
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Najveći dopušten tlak (PS): <K> (bar)
Najniža/najviša dopuštena temperatura (TS*):
*TSmin: Najniža temperatura u području niskog tlaka: <L> (°C)
*TSmax: Standardna temperatura koja odgovara najvećem dopuštenom
tlaku (PS): <M> (°C)
Rashladno sredstvo: <N>
Postavke sigurnosne naprave za tlak: <P> (bar)
Proizvodni broj i godina proizvodnje: pogledajte natpisnu pločicu modela
Legnagyobb megengedhető nyomás (PS): <K> (bar)
Legkisebb/legnagyobb megengedhető hőmérséklet (TS*):
*TSmin: Legkisebb megengedhető hőmérséklet a kis nyomású oldalon:
<L> (°C)
*TSmax: A legnagyobb megengedhető nyomásnak (PS) megfelelő
telítettségi hőmérséklet: <M> (°C)
Hűtőközeg: <N>
A túlnyomás-kapcsoló beállítása: <P> (bar)
Gyártási szám és gyártási év: lásd a berendezés adattábláján
Maksymalne dopuszczalne ciśnienie (PS): <K> (bar)
Minimalna/maksymalna dopuszczalna temperatura (TS*):
*TSmin: Minimalna temperatura po stronie niskociśnieniowej: <L> (°C)
*TSmax: Temperatura nasycenia odpowiadająca maksymalnemu
dopuszczalnemu ciśnieniu (PS): <M> (°C)
Czynnik chłodniczy: <N>
Nastawa ciśnieniowego urządzenia bezpieczeństwa: <P> (bar)
Numer fabryczny oraz rok produkcji: patrz tabliczka znamionowa modelu
Presiune maximă admisibilă (PS): <K> (bar)
Temperatură minimă/maximă admisibilă (TS*):
*TSmin: Temperatură minimă pe partea de presiune joasă: <L> (°C)
*TSmax: Temperatură de saturaţie corespunzând presiunii maxime
admisibile (PS): <M> (°C)
Agent frigorific: <N>
Reglarea dispozitivului de siguranţă pentru presiune: <P> (bar)
Numărul de fabricaţie şi anul de fabricaţie: consultaţi placa de identificare
a modelului
19
20
21
22
23
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maksimalni dovoljeni tlak (PS): <K> (bar)
Minimalna/maksimalna dovoljena temperatura (TS*):
*TSmin: Minimalna temperatura na nizkotlačni strani: <L> (°C)
*TSmax: Nasičena temperatura, ki ustreza maksimalnemu dovoljenemu
tlaku (PS): <M> (°C)
Hladivo: <N>
Nastavljanje varnostne naprave za tlak: <P> (bar)
Tovarniška številka in leto proizvodnje: glejte napisno ploščico
Maksimaalne lubatud surve (PS): <K> (bar)
Minimaalne/maksimaalne lubatud temperatuur (TS*):
*TSmin: Minimaalne temperatuur madalsurve küljel: <L> (°C)
*TSmax: Maksimaalsele lubatud survele (PS) vastav küllastunud
temperatuur: <M> (°C)
Jahutusaine: <N>
Surve turvaseadme seadistus: <P> (bar)
Tootmisnumber ja tootmisaasta: vaadake mudeli andmeplaati
Максимално допустимо налягане (PS): <K> (bar)
Минимално/максимално допустима температура (TS*):
*TSmin: Минимална температура от страната на ниското налягане:
<L> (°C)
*TSmax: Температура на насищане, съответстваща на максимално
допустимото налягане (PS): <M> (°C)
Охладител: <N>
Настройка на предпазното устройство за налягане: <P> (bar)
Фабричен номер и година на производство: вижте табелката
намодела
Maksimalus leistinas slėgis (PS): <K> (bar)
Minimali/maksimali leistina temperatūra (TS*):
*TSmin: Minimali temperatūra žemo slėgio pusėje: <L> (°C)
*TSmax: Prisotinta temperatūra, atitinkamti maksimalų leistiną slėgį
(PS): <M> (°C)
Šaldymo skystis: <N>
Apsauginio slėgio prietaiso nustatymas: <P> (bar)
Gaminio numeris ir pagaminimo metai: žiūrėkite modelio pavadinimo
plokštelę
Maksimālais pieļaujamais spiediens (PS): <K> (bar)
Minimālā/maksimālā pieļaujamā temperatūra (TS*):
*TSmin: Minimālā temperatūra zemā spiediena pusē: <L> (°C)
*TSmax: Piesātinātā temperatūra saskaņā ar maksimālo pieļaujamo
spiedienu (PS): <M> (°C)
Dzesinātājs: <N>
Spiediena drošības ierīces iestatīšana: <P> (bar)
Izgatavošanas numurs un izgatavošanas gads: skat. modeļa
izgatavotājuzņēmuma plāksnītie
24
25
∙
∙
∙
∙
∙
∙
∙
∙
∙
∙
Maximálny povolený tlak (PS): <K> (bar)
Minimálna/maximálna povolená teplota (TS*):
*TSmin: Minimálna teplota na nízkotlakovej strane: <L> (°C)
*TSmax: Nasýtená teplota korešpondujúca s maximálnym povoleným
tlakom (PS): <M> (°C)
Chladivo: <N>
Nastavenie tlakového poistného zariadenia: <P> (bar)
Výrobné číslo a rok výroby: nájdete na výrobnom štítku modelu
İzin verilen maksimum basınç (PS): <K> (bar)
İzin verilen minimum/maksimum sıcaklık (TS*):
*TSmin: Düşük basınç tarafındaki minimum sıcaklık: <L> (°C)
*TSmax: İzin verilen maksimum basınca (PS) karşı gelen doyma
sıcaklığı: <M> (°C)
Soğutucu: <N>
Basınç emniyet düzeninin ayarı: <P> (bar)
İmalat numarası ve imalat yılı: modelin ünite plakasına bakın
<K>
<L>
<M>
TSmin
TSmax
PS
<N>
<P>
40
–30
67
R410A
40 bar
°C
°C
bar
01
02
03
04
05
Name and address of the Notified body that judged positively
oncompliance with the Pressure Equipment Directive: <Q>
Name und Adresse der benannten Stelle, die positiv unter Einhaltung der
Druckanlagen-Richtlinie urteilte: <Q>
Nom et adresse de l’organisme notifié qui a évalué positivement la
conformité à la directive sur l’équipement de pression: <Q>
Naam en adres van de aangemelde instantie die positief geoordeeld
heeft over de conformiteit met de Richtlijn Drukapparatuur: <Q>
Nombre y dirección del Organismo Notificado que juzgó positivamente el
cumplimiento con la Directiva en materia de Equipos de Presión: <Q>
06
07
08
09
Nome e indirizzo dell’Ente riconosciuto che ha riscontrato la conformità
alla Direttiva sulle apparecchiature a pressione: <Q>
Όνομα και διεύθυνση του Κοινοποιημένου οργανισμού που απεφάνθη
θετικά για τη συμμόρφωση προς την Οδηγία Εξοπλισμών υπό Πίεση:
<Q>
Nome e morada do organismo notificado, que avaliou favoravelmente a
conformidade com a directiva sobre equipamentos pressurizados: <Q>
Название и адрес органа технической экспертизы, принявшего
положительное решение о соответствии Директиве об оборудовании
под давлением: <Q>
10
11
12
13
Navn og adresse på bemyndiget organ, der har foretaget en positiv
bedømmelse af, at udstyret lever op til kravene i PED (Direktiv for
Trykbærende Udstyr): <Q>
Namn och adress för det anmälda organ som godkänt uppfyllandet av
tryckutrustningsdirektivet: <Q>
Navn på og adresse til det autoriserte organet som positivt bedømte
samsvar med direktivet for trykkutstyr (Pressure Equipment Directive):
<Q>
Sen ilmoitetun elimen nimi ja osoite, joka teki myönteisen päätöksen
painelaitedirektiivin noudattamisesta: <Q>
14
15
16
17
18
Název a adresa informovaného orgánu, který vydal pozitivní posouzení
shody se směrnicí o tlakových zařízeních: <Q>
Naziv i adresa prijavljenog tijela koje je donijelo pozitivnu prosudbu o
usklađenosti sa Smjernicom za tlačnu opremu: <Q>
A nyomástartó berendezésekre vonatkozó irányelvnek való
megfelelőséget igazoló bejelentett szervezet neve és címe: <Q>
Nazwa i adres Jednostki notyfikowanej, która wydała pozytywną opinię
dotyczącą spełnienia wymogów Dyrektywy dot. Urządzeń Ciśnieniowych:
<Q>
Denumirea şi adresa organismului notificat care a apreciat pozitiv
conformarea cu Directiva privind echipamentele sub
presiune: <Q>
19
20
21
22
23
Ime in naslov organa za ugotavljanje skladnosti, ki je pozitivno ocenil
združljivost z Direktivo o tlačni opremi: <Q>
Teavitatud organi, mis hindas Surveseadmete Direktiiviga ühilduvust
positiivselt, nimi ja aadress: <Q>
Наименование и адрес на упълномощения орган, който
сеепроизнесъл положително относно съвместимостта
сДирективата за оборудване под налягане: <Q>
Atsakingos institucijos, kuri davė teigiamą sprendimą pagal slėginės
įrangos direktyvą pavadinimas ir adresas: <Q>
Sertifikācijas institūcijas, kura ir devusi pozitīvu slēdzienu par atbilstību
Spiediena lekārtu Direktīvai, nosaukums un
adrese: <Q>
24
25
Názov a adresa certifikačného úradu, ktorý kladne posúdil zhodu so
smernicou pre tlakové zariadenia: <Q>
Basınçlı Teçhizat Direktifine uygunluk hususunda olumlu olarak
değerlendirilen Onaylanmış kuruluşun adı ve adresi: <Q>
<Q> VINÇOTTE nv
Jan Olieslagerslaan 35
1800 Vilvoorde, Belgium
Shigeki Morita
Director
Ostend, 2nd of October 2017
Table of Contents
Installation and operation manual
5
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
Table of Contents
1 About the documentation 6
1.1 About this document.................................................................. 6
2 Specific installer safety instructions 6
For the user 7
3 User safety instructions 7
3.1 General...................................................................................... 7
3.2 Instructions for safe operation ................................................... 8
4 About the system 9
4.1 System layout............................................................................ 9
5 User interface 10
6 Operation 10
6.1 Operation range ........................................................................ 10
6.2 Operating the system ................................................................ 10
6.2.1 About operating the system ........................................ 10
6.2.2 About cooling, heating, fan only, and automatic
operation..................................................................... 10
6.2.3 About the heating operation........................................ 10
6.2.4 To operate the system (WITHOUT cool/heat
changeover remote control switch)............................. 10
6.2.5 To operate the system (WITH cool/heat changeover
remote control switch)................................................. 10
6.3 Using the dry program............................................................... 11
6.3.1 About the dry program ................................................ 11
6.3.2 To use the dry program (WITHOUT cool/heat
changeover remote control switch)............................. 11
6.3.3 To use the dry program (WITH cool/heat changeover
remote control switch)................................................. 11
6.4 Adjusting the air flow direction................................................... 11
6.4.1 About the air flow flap ................................................. 11
6.5 Setting the master user interface .............................................. 12
6.5.1 About setting the master user interface ...................... 12
7 Maintenance and service 12
7.1 About the refrigerant.................................................................. 12
7.2 After-sales service and warranty ............................................... 12
7.2.1 Warranty period .......................................................... 12
7.2.2 Recommended maintenance and inspection.............. 12
8 Troubleshooting 13
8.1 Error codes: Overview............................................................... 13
8.2 Symptoms that are NOT system malfunctions .......................... 14
8.2.1 Symptom: The system does not operate .................... 14
8.2.2 Symptom: Cool/Heat cannot be changed over ........... 14
8.2.3 Symptom: Fan operation is possible, but cooling and
heating do not work..................................................... 14
8.2.4 Symptom: The fan speed does not correspond to the
setting ......................................................................... 14
8.2.5 Symptom: The fan direction does not correspond to
the setting ................................................................... 14
8.2.6 Symptom: White mist comes out of a unit (Indoor
unit)............................................................................. 15
8.2.7 Symptom: White mist comes out of a unit (Indoor
unit, outdoor unit)........................................................ 15
8.2.8 Symptom: The user interface reads "U4" or "U5" and
stops, but then restarts after a few minutes................ 15
8.2.9 Symptom: Noise of air conditioners (Indoor unit)........ 15
8.2.10 Symptom: Noise of air conditioners (Indoor unit,
outdoor unit)................................................................ 15
8.2.11 Symptom: Noise of air conditioners (Outdoor unit)..... 15
8.2.12 Symptom: Dust comes out of the unit......................... 15
8.2.13 Symptom: The units can give off odours..................... 15
8.2.14 Symptom: The outdoor unit fan does not spin ............ 15
8.2.15 Symptom: The display shows "88"............................... 15
8.2.16 Symptom: The compressor in the outdoor unit does
not stop after a short heating operation ....................... 15
8.2.17 Symptom: The inside of an outdoor unit is warm
even when the unit has stopped .................................. 15
8.2.18 Symptom: Hot air can be felt when the indoor unit is
stopped ........................................................................ 15
9 Relocation 15
10 Disposal 15
For the installer 16
11 About the box 16
11.1 About ............................................................................ 16
11.2 Compressor unit ......................................................................... 16
11.2.1 To remove the accessories from the compressor unit. 16
11.2.2 To remove the transportation stay ............................... 16
11.2.3 To remove the transportation EPS............................... 16
12 About the units and options 16
12.1 About the compressor unit and heat exchanger unit.................. 16
12.2 System layout............................................................................. 17
12.3 Combining units and options...................................................... 17
12.3.1 Possible options for the compressor unit and heat
exchanger unit ............................................................. 17
13 Unit installation 18
13.1 Preparing the installation site ..................................................... 18
13.1.1 Installation site requirements of the compressor unit... 18
13.2 Opening the unit......................................................................... 18
13.2.1 To open the compressor unit ....................................... 18
13.3 Mounting the compressor unit.................................................... 18
13.3.1 Guidelines when installing the compressor unit........... 18
14 Piping installation 19
14.1 Preparing refrigerant piping........................................................ 19
14.1.1 Refrigerant piping requirements................................... 19
14.1.2 Refrigerant piping material........................................... 19
14.1.3 To select the piping size .............................................. 19
14.1.4 To select refrigerant branch kits................................... 20
14.1.5 Refrigerant piping length and height difference ........... 20
14.2 Connecting the refrigerant piping ............................................... 20
14.2.1 Using the stop valve and service port.......................... 20
14.2.2 To remove the pinched pipes....................................... 21
14.2.3 To connect the refrigerant piping to the compressor
unit ............................................................................... 22
14.3 Checking the refrigerant piping .................................................. 23
14.3.1 About checking the refrigerant piping .......................... 23
14.3.2 Checking refrigerant piping: General guidelines.......... 23
14.3.3 Checking refrigerant piping: Setup............................... 23
14.3.4 To perform a leak test.................................................. 24
14.3.5 To perform vacuum drying........................................... 24
14.3.6 To insulate the refrigerant piping ................................. 24
14.4 Charging refrigerant ................................................................... 25
14.4.1 Precautions when charging refrigerant ........................ 25
14.4.2 To determine the additional refrigerant amount........... 25
14.4.3 To charge refrigerant ................................................... 25
14.4.4 Error codes when charging refrigerant......................... 26
14.4.5 To fix the fluorinated greenhouse gases label ............. 26
15 Electrical installation 27
15.1 About electrical compliance........................................................ 27
15.2 Safety device requirements........................................................ 27
15.3 Field wiring: Overview ................................................................ 27
15.4 To connect the electrical wiring on the compressor unit ............ 28
15.5 To check the insulation resistance of the compressor ............... 29
16 Configuration 29
16.1 Making field settings................................................................... 29
1 About the documentation
Installation and operation manual
6
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
16.1.1 About making field settings......................................... 29
16.1.2 To access the field setting components...................... 29
16.1.3 Field setting components............................................ 29
16.1.4 To access mode 1 or 2 ............................................... 30
16.1.5 To use mode 1 (and default situation) ........................ 31
16.1.6 To use mode 2............................................................ 31
16.1.7 Mode 1 (and default situation): Monitoring settings .... 32
16.1.8 Mode 2: Field settings................................................. 33
16.1.9 To connect the PC configurator to the compressor
unit .............................................................................. 36
17 Commissioning 36
17.1 Precautions when commissioning............................................. 36
17.2 Checklist before commissioning................................................ 36
17.3 Checklist during commissioning................................................ 37
17.3.1 About the test run........................................................ 37
17.3.2 To perform a test run (7-LEDs display)....................... 37
17.3.3 To perform a test run (7-segment display).................. 37
17.3.4 Correcting after abnormal completion of the test run.. 38
17.3.5 Operating the unit ....................................................... 38
18 Hand-over to the user 38
19 Troubleshooting 38
19.1 Solving problems based on error codes.................................... 38
19.1.1 Error codes: Overview ................................................ 39
20 Technical data 42
20.1 Piping diagram: Compressor unit and heat exchanger unit ...... 42
20.2 Wiring diagram: Compressor unit.............................................. 43
21 Disposal 44
1 About the documentation
1.1 About this document
Target audience
Authorised installers + end users
INFORMATION
This appliance is intended to be used by expert or trained
users in shops, in light industry and on farms, or for
commercial use by lay persons.
Documentation set
This document is part of a documentation set. The complete set
consists of:
▪General safety precautions:
▪ Safety instructions that you must read before installing
▪ Format: Paper (in the accessory bag of the compressor unit)
▪Compressor unit installation and operation manual:
▪ Installation and operation instructions
▪ Format: Paper (in the accessory bag of the compressor unit)
▪Heat exchanger unit installation manual:
▪ Installation instructions
▪ Format: Paper (in the accessory bag of the heat exchanger
unit)
▪Installer and user reference guide:
▪ Preparation of the installation, reference data,…
▪ Detailed step-by-step instructions and background information
for basic and advanced usage
▪ Format: Digital files on http://www.daikineurope.com/support-
and-manuals/product-information/
Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.
The original documentation is written in English. All other languages
are translations.
Technical engineering data
▪ A subset of the latest technical data is available on the regional
Daikin website (publicly accessible).
▪ The full set of latest technical data is available on the Daikin
Business Portal (authentication required).
2 Specific installer safety
instructions
Always observe the following safety instructions and regulations.
WARNING
Tear apart and throw away plastic packaging bags so that
nobody, especially children, can play with them. Possible
risk: suffocation.
CAUTION
Appliance not accessible to the general public, install it in a
secured area, protected from easy access.
This unit, both indoor and outdoor, is suitable for
installation in a commercial and light industrial
environment.
CAUTION
Excessive refrigerant concentrations in a closed room can
lead to oxygen deficiency.
DANGER: RISK OF ELECTROCUTION
Do NOT leave the unit unattended when the service cover
is removed.
DANGER: RISK OF BURNING/SCALDING
DANGER: RISK OF ELECTROCUTION
WARNING
Take sufficient precautions in case of refrigerant leakage. If
refrigerant gas leaks, ventilate the area immediately.
Possible risks:
▪ Excessive refrigerant concentrations in a closed room
can lead to oxygen deficiency.
▪ Toxic gas might be produced if refrigerant gas comes
into contact with fire.
WARNING
ALWAYS recover the refrigerant. Do NOT release them
directly into the environment. Use a vacuum pump to
evacuate the installation.
WARNING
During tests, NEVER pressurize the product with a
pressure higher than the maximum allowable pressure (as
indicated on the nameplate of the unit).
CAUTION
Do not vent gases into the atmosphere.
3 User safety instructions
Installation and operation manual
7
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
WARNING
Any gas or oil remaining inside the stop valve may blow off
the spun piping.
If these instructions are NOT followed correctly it may
result in property damage or personal injury, which may be
serious depending on the circumstances.
WARNING
NEVER remove the spun piping by brazing.
Any gas or oil remaining inside the stop valve may blow off
the spun piping.
WARNING
▪ ONLY use R410A as refrigerant. Other substances
may cause explosions and accidents.
▪ R410A contains fluorinated greenhouse gases. Its
global warming potential (GWP) value is 2087.5. Do
NOT vent these gases into the atmosphere.
▪ When charging refrigerant, ALWAYS use protective
gloves and safety glasses.
CAUTION
Do NOT push or place redundant cable length in the unit.
WARNING
▪ If the power supply has a missing or wrong N-phase,
equipment might break down.
▪ Establish proper earthing. Do NOT earth the unit to a
utility pipe, surge absorber, or telephone earth.
Incomplete earthing may cause electrical shock.
▪ Install the required fuses or circuit breakers.
▪ Secure the electrical wiring with cable ties so that the
cables do NOT come in contact with sharp edges or
piping, particularly on the high-pressure side.
▪ Do NOT use taped wires, stranded conductor wires,
extension cords, or connections from a star system.
They can cause overheating, electrical shock or fire.
▪ Do NOT install a phase advancing capacitor, because
this unit is equipped with an inverter. A phase
advancing capacitor will reduce performance and may
cause accidents.
WARNING
▪ All wiring MUST be performed by an authorised
electrician and MUST comply with the applicable
legislation.
▪ Make electrical connections to the fixed wiring.
▪ All components procured on-site and all electrical
construction MUST comply with the applicable
legislation.
WARNING
ALWAYS use multicore cable for power supply cables.
CAUTION
▪ When connecting the power supply: connect the earth
cable first, before making the current-carrying
connections.
▪ When disconnecting the power supply: disconnect the
current-carrying cables first, before separating the earth
connection.
▪ The length of the conductors between the power supply
stress relief and the terminal block itself must be as
such that the current-carrying wires are tautened before
the earth wire is in case the power supply is pulled
loose from the stress relief.
CAUTION
Do NOT perform the test operation while working on
the indoor units.
When performing the test operation, NOT only the outdoor
unit, but the connected indoor unit will operate as well.
Working on an indoor unit while performing a test operation
is dangerous.
CAUTION
Do NOT insert fingers, rods or other objects into the air
inlet or outlet. Do NOT remove the fan guard. When the
fan is rotating at high speed, it will cause injury.
For the user
3 User safety instructions
Always observe the following safety instructions and regulations.
3.1 General
WARNING
If you are NOT sure how to operate the
unit, contact your installer.
WARNING
Children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge can only
use this appliance if they have been
3 User safety instructions
Installation and operation manual
8
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
given supervision or instruction
concerning the use of the appliance by
a person responsible for their safety.
Children MUST NOT play with the
appliance.
Cleaning and user maintenance MUST
NOT be carried out by children without
supervision.
WARNING
To prevent electrical shocks or fire:
▪ Do NOT rinse the unit.
▪ Do NOT operate the unit with wet
hands.
▪ Do NOT place any objects containing
water on the unit.
CAUTION
▪ Do NOT place any objects or
equipment on top of the unit.
▪ Do NOT sit, climb or stand on the
unit.
▪ Units are marked with the following symbol:
This means that electrical and electronic products may NOT be
mixed with unsorted household waste. Do NOT try to dismantle
the system yourself: the dismantling of the system, treatment of
the refrigerant, of oil and of other parts must be done by an
authorized installer and must comply with applicable legislation.
Units must be treated at a specialized treatment facility for reuse,
recycling and recovery. By ensuring this product is disposed of
correctly, you will help to prevent potential negative consequences
for the environment and human health. For more information,
contact your installer or local authority.
▪ Batteries are marked with the following symbol:
This means that the batteries may NOT be mixed with unsorted
household waste. If a chemical symbol is printed beneath the
symbol, this chemical symbol means that the battery contains a
heavy metal above a certain concentration.
Possible chemical symbols are: Pb: lead (>0.004%).
Waste batteries must be treated at a specialized treatment facility
for reuse. By ensuring waste batteries are disposed of correctly,
you will help to prevent potential negative consequences for the
environment and human health.
3.2 Instructions for safe operation
CAUTION
▪ NEVER touch the internal parts of the
controller.
▪ Do NOT remove the front panel.
Some parts inside are dangerous to
touch and appliance problems may
happen. For checking and adjusting
the internal parts, contact your
dealer.
CAUTION
Do NOT operate the system when
using a room fumigation-type
insecticide. Chemicals could collect in
the unit, and endanger the health of
people who are hypersensitive to
chemicals.
CAUTION
It is unhealthy to expose your body to
the air flow for a long time.
CAUTION
To avoid oxygen deficiency, ventilate
the room sufficiently if equipment with
burner is used together with the
system.
WARNING
This unit contains electrical and hot
parts.
WARNING
Before operating the unit, be sure the
installation has been carried out
correctly by an installer.
WARNING
Never touch the air outlet or the
horizontal blades while the swing flap
is in operation. Fingers may become
caught or the unit may break down.
CAUTION
Do NOT insert fingers, rods or other
objects into the air inlet or outlet. Do
NOT remove the fan guard. When the
fan is rotating at high speed, it will
cause injury.
4 About the system
Installation and operation manual
9
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
CAUTION: Pay attention to the fan!
It is dangerous to inspect the unit while
the fan is running.
Be sure to turn off the main switch
before executing any maintenance
task.
CAUTION
After a long use, check the unit stand
and fitting for damage. If damaged, the
unit may fall and result in injury.
WARNING
NEVER replace a fuse with a fuse of a
wrong ampere ratings or other wires
when a fuse blows out. Use of wire or
copper wire may cause the unit to
break down or cause a fire.
WARNING
▪ Do NOT modify, disassemble,
remove, reinstall or repair the unit
yourself as incorrect dismantling or
installation may cause an electric
shock or fire. Contact your dealer.
▪ In case of accidental refrigerant
leaks, make sure there are no naked
flames. The refrigerant itself is
entirely safe, non-toxic and non-
combustible, but it will generate toxic
gas when it accidentally leaks into a
room where combustible air from fan
heaters, gas cookers, etc. is present.
Always have qualified service
personnel confirm that the point of
leakage has been repaired or
corrected before resuming operation.
WARNING
Stop operation and shut off the
power if anything unusual occurs
(burning smells etc.).
Leaving the unit running under such
circumstances may cause breakage,
electric shock or fire. Contact your
dealer.
WARNING
The refrigerant in the system is safe
and normally does not leak. If the
refrigerant leaks in the room, contact
with a fire of a burner, a heater or a
cooker may result in a harmful gas.
Turn off any combustible heating
devices, ventilate the room and contact
the dealer where you purchased the
unit.
Do not use the system until a service
person confirms that the portion where
the refrigerant leaks is repaired.
CAUTION
NEVER expose little children, plants or
animals directly to the airflow.
4 About the system
The VRV IV heat pump for indoor installation can be used for
heating/cooling applications.
NOTICE
Do NOT use the system for other purposes. In order to
avoid any quality deterioration, do NOT use the unit for
cooling precision instruments, food, plants, animals, or
works of art.
NOTICE
For future modifications or expansions of your system:
A full overview of allowable combinations (for future
system extensions) is available in technical engineering
data and should be consulted. Contact your installer to
receive more information and professional advice.
4.1 System layout
d d
c c
a
b
VRV DX VRV DX VRV DX EKEXV
AHU
d d
1 2
1In case of VRVDX indoor units
2In case of VRVDX indoor units combined with an air
handling unit
aHeat exchanger unit
bCompressor unit
cRefrigerant piping
dUser interface (dedicated depending on indoor unit type)
VRVDX VRV direct expansion (DX) indoor unit
EKEXV Expansion valve kit
AHU Air handling unit
5 User interface
Installation and operation manual
10
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
5 User interface
CAUTION
▪ NEVER touch the internal parts of the controller.
▪ Do NOT remove the front panel. Some parts inside are
dangerous to touch and appliance problems may
happen. For checking and adjusting the internal parts,
contact your dealer.
This operation manual offers a non-exhaustive overview of the main
functions of the system.
Detailed information on required actions to achieve certain functions
can be found in the dedicated installation and operation manual of
the indoor unit.
Refer to the operation manual of the installed user interface.
6 Operation
6.1 Operation range
Use the system in the following temperature and humidity ranges for
safe and effective operation.
Specification 5HP 8HP
Maximum capacity Heating 16.0kW 25.0kW
Cooling 14.0kW 22.4kW
Outside ambient
design temperature
Heating –20~15.5°CWB
Cooling –5~46°CDB
Ambient design temperature of
compressor unit and heat exchanger
unit
5~35°CDB
Maximum relative
humidity around the
compressor unit and
heat exchanger unit
Heating 50%(a)
Cooling 80%(a)
Special operation ranges are valid in case of using AHU. They can
be found in the installation/operation manual of the dedicated unit.
Latest information can be found in the technical engineering data.
6.2 Operating the system
6.2.1 About operating the system
▪ Operation procedure varies according to the combination of
compressor unit, heat exchanger unit, and user interface.
▪ To protect the unit, turn on the main power switch 6 hours before
operation.
▪ If the main power supply is turned off during operation, operation
will restart automatically after the power turns back on again.
▪ When stopping the unit, the unit might still operate for a few
minutes. This is not a malfunction.
6.2.2 About cooling, heating, fan only, and
automatic operation
▪ Changeover cannot be made with a user interface whose display
shows "change-over under centralised control" (refer to
installation and operation manual of the user interface).
▪ When the display "change-over under centralised control"
flashes, refer to "About setting the master user interface"[412].
▪ The fan may keep on running for about 1 minute after the heating
operation stops.
▪ The air flow rate may adjust itself depending on the room
temperature or the fan may stop immediately. This is not a
malfunction.
6.2.3 About the heating operation
It may take longer to reach the set temperature for general heating
operation than for cooling operation.
The following operation is performed in order to prevent the heating
capacity from dropping or cold air from blowing.
Defrost operation
In heating operation, freezing of the heat exchanger unit's air cooled
coil increases over time, restricting the energy transfer to the heat
exchanger unit's coil. Heating capability decreases and the system
needs to go into defrost operation to be able to remove frost from the
heat exchanger unit's coil. During defrost operation the heating
capacity on the indoor unit side will temporarily drop until defrosting
is completed. After defrosting, the unit will regain its full heating
capacity.
The indoor unit will stop fan operation, the refrigerant cycle will
reverse and energy from inside the building will be used to defrost
the heat exchanger unit coil.
The indoor unit will indicate defrost operation on the display .
During defrost operation, ice melts and possibly evaporates.
Possible consequence: Mist might be visible during or directly after
defrost operation. This is not a malfunction.
Hot start
In order to prevent cold air from blowing out of an indoor unit at the
start of heating operation, the indoor fan is automatically stopped.
The display of the user interface shows . It may take some
time before the fan starts. This is not a malfunction.
6.2.4 To operate the system (WITHOUT cool/
heat changeover remote control switch)
1Press the operation mode selector button on the user interface
several times and select the operation mode of your choice.
Cooling operation
Heating operation
Fan only operation
2Press the ON/OFF button on the user interface.
Result: The operation lamp lights up and the system starts
operating.
6.2.5 To operate the system (WITH cool/heat
changeover remote control switch)
Overview of the changeover remote control switch
a
b
aFAN ONLY/AIR CONDITIONING
SELECTOR SWITCH
Set the switch to for fan only
operation or to for heating or
cooling operation.
bCOOL/HEAT CHANGEOVER SWITCH
Set the switch to for cooling or to
for heating
Note: In case a cool/heat changeover remote control switch is used,
the position of DIP switch 1 (DS1-1) on the main PCB needs to be
switched to the ON position.
6 Operation
Installation and operation manual
11
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
To start
1Select operation mode with the cool/heat changeover switch as
follows:
Cooling operation
1
1
Heating operation
1
1
Fan only operation
1
2Press the ON/OFF button on the user interface.
Result: The operation lamp lights up and the system starts
operating.
To stop
3Press the ON/OFF button on the user interface once again.
Result: The operation lamp goes out and the system stops
operating.
NOTICE
Do not turn off power immediately after the unit stops, but
wait for at least 5 minutes.
To adjust
For programming temperature, fan speed and air flow direction refer
to the operation manual of the user interface.
6.3 Using the dry program
6.3.1 About the dry program
▪ The function of this program is to decrease the humidity in your
room with minimal temperature decrease (minimal room cooling).
▪ The micro computer automatically determines temperature and
fan speed (cannot be set by the user interface).
▪ The system does not go into operation if the room temperature is
low (<20°C).
6.3.2 To use the dry program (WITHOUT cool/
heat changeover remote control switch)
To start
1Press the operation mode selector button on the user interface
several times and select (program dry operation).
2Press the ON/OFF button of the user interface.
Result: The operation lamp lights up and the system starts
operating.
3Press the air flow direction adjust button (only for double-flow,
multi-flow, corner, ceiling-suspended and wall-mounted). Refer
to "6.4Adjusting the air flow direction"[411] for details.
To stop
4Press the ON/OFF button on the user interface once again.
Result: The operation lamp goes out and the system stops
operating.
NOTICE
Do not turn off power immediately after the unit stops, but
wait for at least 5 minutes.
6.3.3 To use the dry program (WITH cool/heat
changeover remote control switch)
To start
1Select cooling operation mode with the cool/heat changeover
remote control switch.
1
1
2Press the operation mode selector button on the user interface
several times and select (program dry operation).
3Press the ON/OFF button of the user interface.
Result: The operation lamp lights up and the system starts
operating.
4Press the air flow direction adjust button (only for double-flow,
multi-flow, corner, ceiling-suspended and wall-mounted). Refer
to "6.4Adjusting the air flow direction"[411] for details.
To stop
5Press the ON/OFF button on the user interface once again.
Result: The operation lamp goes out and the system stops
operating.
NOTICE
Do not turn off power immediately after the unit stops, but
wait for at least 5 minutes.
6.4 Adjusting the air flow direction
Refer to the operation manual of the user interface.
6.4.1 About the air flow flap
Double flow+multi-flow units
Corner units
Ceiling suspended units
Wall-mounted units
For the following conditions, a micro computer controls the air flow
direction which may be different from the display.
Cooling Heating
▪ When the room temperature is
lower than the set
temperature.
▪ When starting operation.
▪ When the room temperature is
higher than the set
temperature.
▪ At defrost operation.
7 Maintenance and service
Installation and operation manual
12
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
Cooling Heating
▪ When operating continuously at horizontal air flow direction.
▪ When continuous operation with downward air flow is performed
at the time of cooling with a ceiling-suspended or a wall-mounted
unit, the micro computer may control the flow direction, and then
the user interface indication will also change.
The air flow direction can be adjusted in one of the following ways:
▪ The air flow flap itself adjusts its position.
▪ The air flow direction can be fixed by the user.
▪ Automatic and desired position .
WARNING
Never touch the air outlet or the horizontal blades while the
swing flap is in operation. Fingers may become caught or
the unit may break down.
NOTICE
▪ The movable limit of the flap is changeable. Contact
your dealer for details. (only for double-flow, multi-flow,
corner, ceiling-suspended and wall-mounted).
▪ Avoid operating in the horizontal direction . It may
cause dew or dust to settle on the ceiling or flap.
6.5 Setting the master user interface
6.5.1 About setting the master user interface
d d
c c
a
b
VRV DX VRV DX VRV DX EKEXV
AHU
d d
1 2
1In case of VRVDX indoor units
2In case of VRVDX indoor units combined with an air
handling unit
aHeat exchanger unit
bCompressor unit
cRefrigerant piping
dUser interface (dedicated depending on indoor unit type)
VRVDX VRV direct expansion (DX) indoor unit
EKEXV Expansion valve kit
AHU Air handling unit
When the system is installed as shown in the figure above, it is
necessary to designate one of the user interfaces as the master user
interface.
The displays of slave user interfaces show (change-over
under centralised control) and slave user interfaces automatically
follow the operation mode directed by the master user interface.
Only the master user interface can select heating or cooling mode.
7 Maintenance and service
NOTICE
NEVER inspect or service the unit by yourself. Ask a
qualified service person to perform this work.
WARNING
NEVER replace a fuse with a fuse of a wrong ampere
ratings or other wires when a fuse blows out. Use of wire
or copper wire may cause the unit to break down or cause
a fire.
CAUTION
Do NOT insert fingers, rods or other objects into the air
inlet or outlet. Do NOT remove the fan guard. When the
fan is rotating at high speed, it will cause injury.
CAUTION
After a long use, check the unit stand and fitting for
damage. If damaged, the unit may fall and result in injury.
NOTICE
Do NOT wipe the controller operation panel with benzine,
thinner, chemical dust cloth, etc. The panel may get
discoloured or the coating peeled off. If it is heavily dirty,
soak a cloth in water-diluted neutral detergent, squeeze it
well and wipe the panel clean. Wipe it with another dry
cloth.
7.1 About the refrigerant
This product contains fluorinated greenhouse gases. Do NOT vent
gases into the atmosphere.
Refrigerant type: R410A
Global warming potential (GWP) value: 2087.5
NOTICE
Applicable legislation on fluorinated greenhouse gases
requires that the refrigerant charge of the unit is indicated
both in weight and CO2 equivalent.
Formula to calculate the quantity in CO2 equivalent
tonnes: GWP value of the refrigerant × total refrigerant
charge [in kg] / 1000
Please contact your installer for more information.
WARNING
The refrigerant in the system is safe and normally does not
leak. If the refrigerant leaks in the room, contact with a fire
of a burner, a heater or a cooker may result in a harmful
gas.
Turn off any combustible heating devices, ventilate the
room and contact the dealer where you purchased the unit.
Do not use the system until a service person confirms that
the portion where the refrigerant leaks is repaired.
7.2 After-sales service and warranty
7.2.1 Warranty period
▪ This product includes a warranty card that was filled in by the
dealer at the time of installation. The completed card has to be
checked by the customer and stored carefully.
▪ If repairs to the product are necessary within the warranty period,
contact your dealer and keep the warranty card at hand.
7.2.2 Recommended maintenance and
inspection
Since dust collects when using the unit for several years,
performance of the unit will deteriorate to some extent. As taking
apart and cleaning interiors of units requires technical expertise and
in order to ensure the best possible maintenance of your units, we
recommend to enter into a maintenance and inspection contract on
top of normal maintenance activities. Our network of dealers has
access to a permanent stock of essential components in order to
keep your unit in operation as long as possible. Contact your dealer
for more information.
8 Troubleshooting
Installation and operation manual
13
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
When asking your dealer for an intervention, always state:
▪ The complete model name of the unit.
▪ The manufacturing number (stated on the nameplate of the unit).
▪ The installation date.
▪ The symptoms or malfunction, and details of the defect.
WARNING
▪ Do NOT modify, disassemble, remove, reinstall or
repair the unit yourself as incorrect dismantling or
installation may cause an electric shock or fire. Contact
your dealer.
▪ In case of accidental refrigerant leaks, make sure there
are no naked flames. The refrigerant itself is entirely
safe, non-toxic and non-combustible, but it will
generate toxic gas when it accidentally leaks into a
room where combustible air from fan heaters, gas
cookers, etc. is present. Always have qualified service
personnel confirm that the point of leakage has been
repaired or corrected before resuming operation.
8 Troubleshooting
If one of the following malfunctions occur, take the measures shown
below and contact your dealer.
WARNING
Stop operation and shut off the power if anything
unusual occurs (burning smells etc.).
Leaving the unit running under such circumstances may
cause breakage, electric shock or fire. Contact your dealer.
The system MUST be repaired by a qualified service person.
Malfunction Measure
If a safety device such as a fuse, a
breaker or an earth leakage breaker
frequently actuates or the ON/OFF
switch does NOT properly work.
Turn OFF the main power
switch.
If water leaks from the unit. Stop the operation.
The operation switch does NOT work
well.
Turn OFF the power
supply.
If the user interface display indicates the
unit number, the operation lamp flashes
and the malfunction code appears.
Notify your installer and
report the malfunction
code.
If the system does NOT operate properly except for the above
mentioned cases and none of the above mentioned malfunctions is
evident, investigate the system in accordance with the following
procedures.
Malfunction Measure
If the system does not
operate at all.
▪ Check if there is no power failure. Wait
until power is restored. If power failure
occurs during operation, the system
automatically restarts immediately after
power is restored.
▪ Check if no fuse has blown or breaker is
activated. Change the fuse or reset the
breaker if necessary.
Malfunction Measure
If the system goes into
fan only operation, but
as soon as it goes into
heating or cooling
operation, the system
stops.
▪ Check if air inlet or outlet of heat
exchanger unit or indoor unit is not
blocked by obstacles. Remove any
obstacles and make sure the air can flow
freely.
▪ Check if the user interface display shows
(time to clean the air filter). (Refer to
"7 Maintenance and service" [4 12] and
"Maintenance" in the indoor unit manual.)
The system operates
but cooling or heating
is insufficient.
▪ Check if air inlet or outlet of heat
exchanger unit or indoor unit is not
blocked by obstacles. Remove any
obstacle and make it well-ventilated.
▪ Check if the air filter is not clogged (refer
to "Maintenance" in the indoor unit
manual).
▪ Check the temperature setting.
▪ Check the fan speed setting on your user
interface.
▪ Check for open doors or windows. Close
doors and windows to prevent wind from
coming in.
▪ Check if there are too many occupants in
the room during cooling operation. Check
if the heat source of the room is
excessive.
▪ Check if direct sunlight enters the room.
Use curtains or blinds.
▪ Check if the air flow angle is proper.
If after checking all above items, it is impossible to fix the problem
yourself, contact your installer and state the symptoms, the complete
model name of the unit (with manufacturing number if possible) and
the installation date (possibly listed on the warranty card).
8.1 Error codes: Overview
In case a malfunction code appears on the indoor unit user interface
display, contact your installer and inform the malfunction code, the
unit type, and serial number (you can find this information on the
nameplate of the unit).
For your reference, a list with malfunction codes is provided. You
can, depending on the level of the malfunction code, reset the code
by pushing the ON/OFF button. If not, ask your installer for advice.
Main code Contents
External protection device was activated
EEPROM failure (indoor)
Drain system malfunction (indoor)
Fan motor malfunction (indoor)
Swing flap motor malfunction (indoor)
Expansion valve malfunction (indoor)
Drain malfunction (indoor unit)
Filter dust chamber malfunction (indoor)
Capacity setting malfunction (indoor)
Transmission malfunction between main PCB and sub
PCB (indoor)
Heat exchanger thermistor malfunction (indoor; liquid)
Heat exchanger thermistor malfunction (indoor; gas)
Suction air thermistor malfunction (indoor)
Discharge air thermistor malfunction (indoor)
8 Troubleshooting
Installation and operation manual
14
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
Main code Contents
Movement detector or floor temperature sensor
malfunction (indoor)
User interface thermistor malfunction (indoor)
Fan or drain pump malfunction (heat exchanger unit)
PCB malfunction (compressor unit)
Current leakage detector was activated (compressor
unit)
High pressure switch was activated
Low pressure malfunction (compressor unit)
Compressor lock detection (compressor unit)
Electronic expansion valve malfunction (compressor
unit or heat exchanger unit)
Discharge temperature malfunction (compressor unit)
Abnormal suction temperature (compressor unit)
Refrigerant overcharge detection
High pressure switch malfunction
Low pressure switch malfunction
Ambient temperature sensor malfunction (heat
exchanger unit)
Pressure sensor malfunction
Current sensor malfunction
Discharge temperature sensor malfunction
(compressor unit)
Heat exchanger gas temperature sensor malfunction
(heat exchanger unit)
Suction temperature sensor malfunction (compressor
unit)
De-icing temperature sensor malfunction (heat
exchanger unit)
Liquid temperature sensor (after subcool HE)
malfunction (compressor unit)
Gas temperature sensor (after subcool HE)
malfunction (compressor unit)
High pressure sensor malfunction (BIPH)
Low pressure sensor malfunction (BIPL)
INV PCB abnormal
Fin temperature abnormal
Inverter PCB faulty
Compressor over current detected
Compressor lock (startup)
Transmission compressor unit - inverter: INV
transmission trouble
INV unbalanced power supply voltage
Fin thermistor malfunction
Heat exchanger unit capacity setting malfunction.
Abnormal low pressure drop, faulty expansion valve
Reversed power supply phase malfunction
INV voltage power shortage
System test run not yet executed
Faulty wiring indoor/heat exchanger unit/compressor
unit
Abnormal user interface - indoor communication
Abnormal main-sub user interface communication
System mismatch. Wrong type of indoor units
combined. Indoor unit malfunction. Heat exchanger
unit malfunction.
Main code Contents
Connection malfunction over indoor units or type
mismatch (wrong type of indoor units or heat
exchanger unit)
Centralised address duplication
Malfunction in communication centralised control
device - indoor unit
Auto address malfunction (inconsistency)
Auto address malfunction (inconsistency)
8.2 Symptoms that are NOT system
malfunctions
The following symptoms are NOT system malfunctions:
8.2.1 Symptom: The system does not operate
▪ The air conditioner does not start immediately after the ON/OFF
button on the user interface is pressed. If the operation lamp
lights, the system is in normal condition. To prevent overloading of
the compressor motor, the air conditioner starts 5 minutes after it
is turned ON again in case it was turned OFF just before. The
same starting delay occurs after the operation mode selector
button was used.
▪ If "Under Centralized Control" is displayed on the user interface,
pressing the operation button causes the display to blink for a few
seconds. The blinking display indicates that the user interface
cannot be used.
▪ The system does not start immediately after the power supply is
turned on. Wait one minute until the micro computer is prepared
for operation.
8.2.2 Symptom: Cool/Heat cannot be changed
over
▪ When the display shows (change-over under centralized
control), it shows that this is a slave user interface.
▪ When the cool/heat changeover remote control switch is installed
and the display shows (change-over under centralized
control), this is because cool/heat changeover is controlled by the
cool/ heat changeover remote control switch. Ask your dealer
where the remote control switch is installed.
8.2.3 Symptom: Fan operation is possible, but
cooling and heating do not work
Immediately after the power is turned on. The micro computer is
getting ready to operate and is performing a communication check
with all indoor units. Please wait 12 minutes maximally until this
process is finished.
8.2.4 Symptom: The fan speed does not
correspond to the setting
The fan speed does not change even if the fan speed adjustment
button in pressed. During heating operation, when the room
temperature reaches the set temperature, the compressor unit goes
off and the indoor unit changes to whisper fan speed. This is to
prevent cold air blowing directly on occupants of the room. The fan
speed will not change even when another indoor unit is in heating
operation, if the button is pressed.
8.2.5 Symptom: The fan direction does not
correspond to the setting
The fan direction does not correspond with the user interface
display. The fan direction does not swing. This is because the unit is
being controlled by the micro computer.
9 Relocation
Installation and operation manual
15
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
8.2.6 Symptom: White mist comes out of a unit
(Indoor unit)
▪ When humidity is high during cooling operation. If the interior of an
indoor unit is extremely contaminated, the temperature distribution
inside a room becomes uneven. It is necessary to clean the
interior of the indoor unit. Ask your dealer for details on cleaning
the unit. This operation requires a qualified service person.
▪ Immediately after the cooling operation stops and if the room
temperature and humidity are low. This is because warm
refrigerant gas flows back into the indoor unit and generates
steam.
8.2.7 Symptom: White mist comes out of a unit
(Indoor unit, outdoor unit)
When the system is changed over to heating operation after defrost
operation. Moisture generated by defrost becomes steam and is
exhausted.
8.2.8 Symptom: The user interface reads "U4"
or "U5" and stops, but then restarts after a
few minutes
This is because the user interface is intercepting noise from electric
appliances other than the air conditioner. The noise prevents
communication between the units, causing them to stop. Operation
automatically restarts when the noise ceases.
8.2.9 Symptom: Noise of air conditioners
(Indoor unit)
▪ A "zeen" sound is heard immediately after the power supply is
turned on. The electronic expansion valve inside an indoor unit
starts working and makes the noise. Its volume will reduce in
about one minute.
▪ A "pishi-pishi" squeaking sound is heard when the system stops
after heating operation. Expansion and contraction of plastic parts
caused by temperature change make this noise.
8.2.10 Symptom: Noise of air conditioners
(Indoor unit, outdoor unit)
▪ A continuous low hissing sound is heard when the system is in
cooling or defrost operation. This is the sound of refrigerant gas
flowing through both indoor and outdoor units.
▪ A hissing sound which is heard at the start or immediately after
stopping operation or defrost operation. This is the noise of
refrigerant caused by flow stop or flow change.
8.2.11 Symptom: Noise of air conditioners
(Outdoor unit)
When the tone of operating noise changes. This noise is caused by
the change of frequency.
8.2.12 Symptom: Dust comes out of the unit
When the unit is used for the first time in a long time. This is
because dust has gotten into the unit.
8.2.13 Symptom: The units can give off odours
The unit can absorb the smell of rooms, furniture, cigarettes, etc.,
and then emit it again.
8.2.14 Symptom: The outdoor unit fan does not
spin
During operation. The speed of the fan is controlled in order to
optimise product operation.
8.2.15 Symptom: The display shows "88"
This is the case immediately after the main power supply switch is
turned on and means that the user interface is in normal condition.
This continues for 1minute.
8.2.16 Symptom: The compressor in the outdoor
unit does not stop after a short heating
operation
This is to prevent refrigerant from remaining in the compressor. The
unit will stop after 5 to 10 minutes.
8.2.17 Symptom: The inside of an outdoor unit is
warm even when the unit has stopped
This is because the crankcase heater is warming the compressor so
that the compressor can start smoothly.
8.2.18 Symptom: Hot air can be felt when the
indoor unit is stopped
Several different indoor units are being run on the same system.
When another unit is running, some refrigerant will still flow through
the unit.
9 Relocation
Contact your dealer for removing and reinstalling the total unit.
Moving units requires technical expertise.
10 Disposal
This unit uses hydrofluorocarbon. Contact your dealer when
discarding this unit.
NOTICE
Do NOT try to dismantle the system yourself: dismantling
of the system, treatment of the refrigerant, oil and other
parts MUST comply with applicable legislation. Units
MUST be treated at a specialised treatment facility for
reuse, recycling and recovery.
11 About the box
Installation and operation manual
16
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
For the installer
11 About the box
11.1 About
is part of Daikin's wider commitment to reduce our
environmental footprint. With we want to create a circular
economy for refrigerants. One of the actions to achieve this, is the
reuse of reclaimed refrigerant in VRV units produced and sold in
Europe. For more information about the countries that are in scope,
visit: http://www.daikin.eu/loop-by-daikin.
11.2 Compressor unit
11.2.1 To remove the accessories from the
compressor unit
1Remove the accessories (part 1).
a
1×
b
1×
c
1×
d
1×
e
1×
f
3×
aGeneral safety precautions
bCompressor unit installation and operation manual
cFluorinated greenhouse gases label
dMultilingual fluorinated greenhouse gases label
eScrew (only needed in case 5HP for shield of transmission
wiring) (see "15.4To connect the electrical wiring on the
compressor unit"[428])
fCable tie
2Remove the service cover. See "To open the compressor
unit"[418].
3Remove the accessories (part 2).
1×1× 1× 1×1×
8 HP a eb dc
1× 1×1×1×
d cba5 HP
a+b Piping accessories for circuit 1 (to the heat exchanger unit)
5HP 8HP
aGas Ø19.1mm Ø22.2mm
bLiquid Ø12.7mm Ø12.7mm
c+d Piping accessories for circuit 2 (to the indoor units)
5HP 8HP
cGas Ø15.9mm Ø19.1mm
dLiquid Ø9.5mm Ø9.5mm
ePiping adapter (Ø19.1→22.2mm) that you need when
connecting piping to the heat exchanger unit (only for
8HP)
11.2.2 To remove the transportation stay
Only for RKXYQ5.
NOTICE
If the unit is operated with the transportation stay attached,
abnormal vibration or noise may be generated.
·
3
1
(10.1 N·m)
2
a
b
11.2.3 To remove the transportation EPS
Only for RKXYQ8.
1Remove the EPS. The EPS protects the unit during transport.
12 About the units and options
12.1 About the compressor unit and
heat exchanger unit
The compressor unit and heat exchanger unit are intended for indoor
installation and aimed for air to air heat pump applications.
Specification 5HP 8HP
Maximum capacity Heating 16.0kW 25.0kW
Cooling 14.0kW 22.4kW
Outside ambient
design temperature
Heating –20~15.5°CWB
Cooling –5~46°CDB
Ambient design temperature of
compressor unit and heat exchanger
unit
5~35°CDB
12 About the units and options
Installation and operation manual
17
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
Specification 5HP 8HP
Maximum relative
humidity around the
compressor unit and
heat exchanger unit
Heating 50%(a)
Cooling 80%(a)
(a) To avoid condensation and water dripping out of the unit. If
the temperature or the humidity is beyond these conditions,
safety devices may be put in action and the air conditioner
may not operate.
12.2 System layout
NOTICE
Design of the system must not be done at temperatures
below –15°C.
d d
c c
a
b
VRV DX VRV DX VRV DX EKEXV
AHU
d d
1 2
1In case of VRVDX indoor units
2In case of VRVDX indoor units combined with an air
handling unit
aHeat exchanger unit
bCompressor unit
cRefrigerant piping
dUser interface (dedicated depending on indoor unit type)
VRVDX VRV direct expansion (DX) indoor unit
EKEXV Expansion valve kit
AHU Air handling unit
12.3 Combining units and options
INFORMATION
Certain options might not be available in your country.
12.3.1 Possible options for the compressor unit
and heat exchanger unit
For more possible options, see the installer and user reference
guide.
Cool/heat selector
In order to control the cooling or heating operation from a central
location, the following option can be connected:
Description 5HP 8HP
Cool/heat selector switch KRC19-26A
Cool/heat selector cable EKCHSC —
Cool/heat selector PCB — BRP2A81(a)
With optional fixing box for the
switch
KJB111A
(a) To install BRP2A81, proceed as follows:
1Check the components of BRP2A81. You do NOT need all of
them.
1×1× 1× 1×1× 1×
Xb ca
1×
X X X
aCable
bCable tie
cPCB
XNot needed
2Remove the mounting plate from the PCB.
1
1
2
3Mount the PCB.
X1M
X1A
A B C
A1P
DS1
X66A
4Connect the cable.
X1A
A1P
DS1
X66A
X1M
5Connect the cool/heat selector switch. Tightening torque X1M
(A/B/C): 0.53~0.63N•m
KRC19-26A
X1A
A B C
A B C
X1M
6Fix the cables with cable ties.
7Turn ON the DIP switch (DS1‑1).
1 2 3 4
OFF
X66A
ON
DS1
A1P
13 Unit installation
Installation and operation manual
18
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
8Perform a test run. See the "Commissioning" chapter.
13 Unit installation
13.1 Preparing the installation site
13.1.1 Installation site requirements of the
compressor unit
▪Service space. Mind the following requirements:
≥10
a
≥10
≥10≥500
≥10
(mm)
b
aTop view
bFront view
CAUTION
Appliance not accessible to the general public, install it in a
secured area, protected from easy access.
These units (compressor unit, heat exchanger unit and
indoor units) are suitable for installation in a commercial
and light industrial environment.
NOTICE
This is a class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
13.2 Opening the unit
13.2.1 To open the compressor unit
DANGER: RISK OF BURNING/SCALDING
DANGER: RISK OF ELECTROCUTION
1Remove the service cover of the compressor unit.
5×5×
5 HP 8 HP
2If you want to make field settings, remove the inspection
cover.
5 HP 8 HP
3If you want to connect electrical wiring, remove the switch box
cover.
4× SW8
4× SW8
5 HP 8 HP
13.3 Mounting the compressor unit
13.3.1 Guidelines when installing the
compressor unit
Check the strength and level of the installation ground so that the
unit will not cause any operating vibration or noise. If the vibration
might be transmitted to the building, use a vibration-proof rubber
(field supply).
You can install the compressor unit directly on the floor or on a
structure.
▪On the floor. You do NOT have to fix the unit with anchor bolts.
▪On a structure. Fix the unit securely with anchor bolts, nuts and
washers (field supply) to the structure. The foundation (steel beam
frame or concrete) must be larger than the grey marked area.
a
≤480
516
≥666
426 (5 HP)
600 (8 HP)
≥640 (5 HP)
≥800 (8 HP)
(mm)
Minimum foundation
aAnchor point (4×)
INFORMATION
The recommended height of the upper protruding part of
the bolts is 20mm.
20 mm
14 Piping installation
Installation and operation manual
19
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
14 Piping installation
14.1 Preparing refrigerant piping
14.1.1 Refrigerant piping requirements
NOTICE
Refrigerant R410A requires strict cautions for keeping the
system clean and dry. Foreign materials (including mineral
oils or moisture) should be prevented from getting mixed
into the system.
NOTICE
The piping and other pressure-containing parts shall be
suitable for refrigerant. Use phosphoric acid deoxidised
seamless copper for refrigerant.
▪ Foreign materials inside pipes (including oils for fabrication) must
be ≤30mg/10m.
14.1.2 Refrigerant piping material
▪Piping material: Phosphoric acid deoxidised seamless copper.
▪Piping temper grade and thickness:
Outer diameter
(Ø)
Temper grade Thickness (t)(a)
6.4mm (1/4")
9.5mm (3/8")
12.7mm (1/2")
Annealed (O) ≥0.80mm
t
Ø
15.9mm (5/8") Annealed (O) ≥0.99mm
19.1mm (3/4")
22.2mm (7/8")
Half hard (1/2H) ≥0.80mm
(a) Depending on the applicable legislation and the maximum
working pressure of the unit (see "PS High" on the unit name
plate), larger piping thickness might be required.
14.1.3 To select the piping size
Determine the proper size using the following tables and reference
figure (only for indication).
A
a
B
D
D
C
D
D
b
EKEXV
AHU
VRV DX
VRV DX
cc
aHeat exchanger unit
bCompressor unit
cRefrigerant branch kit
VRVDX VRVDX indoor unit
EKEXV Expansion valve kit
AHU Air handling unit
APiping between heat exchanger unit and compressor unit
BPiping between compressor unit and (first) refrigerant
branch kit (=main pipe)
CPiping between refrigerant branch kits
DPiping between refrigerant branch kit and indoor unit
In case the required pipe sizes (inch sizes) are not available, it is
also allowed to use other diameters (mm sizes), taken the following
into account:
▪ Select the pipe size nearest to the required size.
▪ Use the suitable adapters for the change-over from inch to mm
pipes (field supply).
▪ The additional refrigerant calculation has to be adjusted as
mentioned in To determine the additional refrigerant amount.
A: Piping between heat exchanger unit and
compressor unit
Use the following diameters:
Compressor unit
capacity type
Piping outer diameter size (mm)
Gas pipe Liquid pipe
5HP 19.1 12.7
8HP 22.2
B: Piping between compressor unit and first
refrigerant branch kit
Use the following diameters:
Compressor unit
capacity type
Piping outer diameter size (mm)
Gas pipe Liquid pipe
Standard Size-up Standard Size-up
5HP 15.9 19.1 9.5 —
8HP 19.1 22.2 9.5 12.7
Standard ↔ Size-up:
If Then
The equivalent pipe
length between the
heat exchanger
unit and the
furthest indoor unit
is 90m or more
5HP It is recommended to increase the
size (size-up) of the main gas pipe
(between compressor unit and first
refrigerant branch kit). If the
recommended gas pipe (size-up) is not
available, you must use the standard
size (which might result in a small
capacity decrease).
8HP ▪ You must increase the size (size-up)
of the main liquid pipe (between
compressor unit and first refrigerant
branch kit).
▪ It is recommended to increase the
size (size-up) of the main gas pipe
(between compressor unit and first
refrigerant branch kit). If the
recommended gas pipe (size-up) is
not available, you must use the
standard size (which might result in a
small capacity decrease).
C: Piping between refrigerant branch kits
Use the following diameters:
Indoor unit capacity
index
Piping outer diameter size (mm)
Gas pipe Liquid pipe
<150 15.9 9.5
150≤x<200 19.1
200≤x<260 22.2
D: Piping between refrigerant branch kit and
indoor unit
Use the same diameters as the connections (liquid, gas) on the
indoor units. The diameters of the indoor units are as follows:
Indoor unit capacity
index
Piping outer diameter size (mm)
Gas pipe Liquid pipe
15~50 12.7 6.4
14 Piping installation
Installation and operation manual
20
RKXYQ5T8 + RKXYQ8T7Y1B
VRV IV compressor unit for indoor installation
4P499900-1A – 2020.10
Indoor unit capacity
index
Piping outer diameter size (mm)
Gas pipe Liquid pipe
63~140 15.9 9.5
200 19.1
250 22.2
14.1.4 To select refrigerant branch kits
For piping example, refer to "To select the piping size"[419].
Refnet joint at first branch (counting from the compressor unit)
When using refnet joints at the first branch counted from the
compressor unit side, choose from the following table in accordance
with the capacity of the compressor unit. Example: Refnet joint c
(B→C/D).
Compressor unit capacity type Refrigerant branch kit
5HP KHRQ22M20T
8HP KHRQ22M29T9
Refnet joints at other branches
For refnet joints other than the first branch, select the proper branch
kit model based on the total capacity index of all indoor units
connected after the refrigerant branch. Example: Refnet joint c
(C→D/D).
Indoor unit capacity index Refrigerant branch kit
<200 KHRQ22M20T
200≤x<260 KHRQ22M29T9
Refnet headers
Concerning refnet headers, choose from the following table in
accordance with the total capacity of all the indoor units connected
below the refnet header.
Indoor unit capacity index Refrigerant branch kit
<260 KHRQ22M29H
INFORMATION
Maximum 8 branches can be connected to a header.
14.1.5 Refrigerant piping length and height
difference
The piping lengths and height differences must comply with the
following requirements.
H1
H2
H3
H5
L1
a
L2
L3
L4
L5
L6
L7
H4
b
EKEXV
AHU
VRV DX
VRV DX
cc
aHeat exchanger unit
bCompressor unit
cRefrigerant branch kit
VRVDX VRVDX indoor unit
EKEXV Expansion valve kit
AHU Air handling unit
H1~H5 Height differences
L1~L7 Piping lengths
Minimum and maximum piping lengths
1 Heat exchanger unit →
Compressor unit
L1≤30m
2 Actual piping length (equivalent
piping length)(a)
L2+L3+L4≤70m (90m)
L2+L5+L6≤70m (90m)
L2+L5+L7≤70m (90m)
3 Total piping length (x=L1+L2+L3+L4+L5+L6+L7)
Minimum 10m≤x
Maximum in case of
8HP
x≤300m
Maximum in case of
5HP
If Then
L1≤30m x≤115m
L1≤25m x≤120m
L1≤20m x≤125m
L1≤15m x≤130m
L1≤10m x≤135m
L1≤5m x≤140m
4 EKEXV → AHU L4≤5m
5 First branch kit → Indoor unit/
AHU
L3+L4≤40m
L5+L6≤40m
L5+L7≤40m
Maximum height differences(b)
1 Heat exchanger unit ↔
Compressor unit
H1≤10m
2 Compressor unit ↔ Indoor unit H2≤30m
H3≤30m
3 EKEXV ↔ AHU H4≤5m
4 Indoor unit ↔ Indoor unit H5≤15m
(a) Assume equivalent piping length of refnet joint=0.5m and
refnet header=1m (for calculation purposes of equivalent
piping length, not for refrigerant charge calculations).
(b) Either unit can be the highest unit.
14.2 Connecting the refrigerant piping
DANGER: RISK OF BURNING/SCALDING
14.2.1 Using the stop valve and service port
To handle the stop valve
Take the following guidelines into account:
▪ Make sure to keep all stop valves open during operation.
▪ The gas and liquid stop valves are factory closed.
▪ Do NOT apply excessive force to the stop valve. Doing so may
break the valve body.
To open the stop valve
1Remove the stop valve cover.
2Insert a hexagon wrench into the stop valve and turn the stop
valve counterclockwise.
Other manuals for VRV IV RKXYQ5T8Y1B Series
1
This manual suits for next models
3
Table of contents
Other Daikin Air Compressor manuals
