Daikin EKWCTRDI1V3 User manual

1
1x
EKWCTRDI1V3
DIGITAL THERMOSTAT 230 V
The EKWCTRDI1V3 with display is intended for regulating the room
temperature by setting the desired target temperature for the activation of
actuators in heating/cooling operation. Every other use is considered not
intended; the manufacturer cannot be held liable for unintended use.
¾The electrical installation must be performed according to the
current national VDE regulations as well as according to the
regulations of your local electric power utility company, by an
authorised and trained electrician, and in a de-energised state.
¾Only an authorised electrician may open the device. It may only
be opened in de-energized state.
¾Only use the device if it is in perfect state.
¾Ensure that children do not play with this device. Children must
be monitored if necessary.
±150 cm
± 30 cm
4b
1
5
2 3
6
4a
7
3,5 mm
a
1 2 1 2
bc
1 2
N/L2
CO
N‘/L2‘
=>
L/L1
N/L2
L/L1
N/L2
L/L1
>
>
5
60 mm
Protective cover
Cleaning
Only use a dry and solvent-free soft
cloth for cleaning.
Dismantling
1. Switch o󰀨 the voltage supply.
2. Remove the wiring.
3. Take o󰀨 the thermostat and dispose
of it properly.
1
2
1. Display with function indicators
2. Dial
• Rotate: Set target temperature/
operate menu
• Press: Activate menu level/
functions
Press the dial to activate menus or features. Rotate the dial to switch
between menus and features and press again to open. Adjust settings and
press to conrm. If no further operation is performed, the display will return
to its original state after max. 30 seconds.

2
Lifestyle functions Minimum temperature
Settings Maximum temperature
Heating Conrm settings
Operating lock Temperature correction
Switching o󰀨 Back
Automatic operation Service
Day operation Cooling
Night operation Display illumination
Target/actual temperature Loading factory settings
Operating voltage: 230 V ±10 %, 50 Hz
Fuse 230 V: T1AH
Switch. element 230 V: Relay
Switching power: 1 A resistive load
Rated current w/o valve drives: 230 V: ≤2 mA
Max. current draw allowed with
connect. valve drives 230V: 1 A
Temperature setting range: 5 - 30 °C
Connection terminals: 0.22 mm² to 1.5 mm²
Reduction difference: adjustable
Temperature measurement: 0 - 40 °C
Ambient temperature: 0 - 50 °C
Storage temperature range: -20 to +70 °C
Admissible ambient humidity: 80%, not condensing
Temp. for ball pressure test: Terminals: 100 °C
Plastic enclosure: 75 °C
CE conformity according to: EN 60730
Protection class 230 V: II
Protection degree: IP 20
Pollution degree: 2
Rated impulse voltage: 1500 V
Type action: Type 1 / Type 1.C
Weight: 105 g
Dimensions (W x H x D): 86 x 86 x 31 mm
Valve protection function: Once every 14 days for 10 minutes
after the last triggering.
Antifreeze function: From +5 °C in heating mode. Inactive
in cooling mode.
Technical data
This symbol means that electrical and electronic products may
NOT be mixed with unsorted household waste. Units must be
treated at a specialized treatment facility for reuse, recycling
and recovery.
By ensuring this product is disposed of correctly, you will help to
prevent potential negative consequences for the environment and
human health.
For more information, contact your installer or local authority.
4P560990-1 2019.01
Copyright 2019 Daikin
https://qr.daikin.eu?N=EKWCTRDI1V3