Installation and Washing Instructions
Place MD frame central o er the toilet
Place the user on the toilet and set the MD frame to a
position comfortable for the client. Ensuring the mesh is
touching the back of the user
Mark out on the #oor the holes where the MD frame will be
%xed to the #oor
Remo e the client from the toilet
Fix the MD frame to the #oor using the guide holes pre iously
marked so that the MD Frame will be %xed in a position
comfortable for the user. MD Frame should be %xed to
the #oor using the appropriate %xings
For maintenance of the toilet the top section on the MD
frame can be easily remo ed, meaning there is no need
to unbolt from the #oor
The mesh can be easily remo ed for washing. The mesh is
similar to a pillow case, simply slide o* and on. Mesh
held into position using Velcro straps
Washing instructions for this mesh can be found on the back
of the mesh.
#$ 5$$$!$5$!
"6$ 7$!.$"
5 !5$"%&5$
"
#$ 5$$$!$5$!
"6$ 8"!""
5 !5$"%&5$
"
MD Frame Information
The MD Frame comes with a 12 month guarantee
All products designed and manufactured by Daily Care Ltd
ha e been CE Tested
Daily Care Ltd is certi%ed to ISO 9001 and ISO 2008.
4 "$!,% $
$$$!9
:"
All the sections of the mesh on the MD Frame are coated in
Polygiene to ensure there are no health and hygiene risks.
Polygiene lasts the lifetime of the fabric by being permanent
odour control, inhibiting the growth of odour-causing
bacteria.
The patented technology helps to protect the mesh against
microbes by building one of nature’s own antimicrobial
agents into arious types of materials & products.
Harmful microbes deposited onto these surfaces become
incapable of replicating themsel es through a process known
as:
“The Polygiene Eect”
Polygiene technology is based on the natural ability of sil er
salt to inhibit the growth of a wide range of harmful
microbes. In products made with Polygiene, sil er ions
continuously migrate to the surface where the sil er ions
e*ecti ely suppress microbial growth. This acti ity pro ides
protection 24 hours a day, 7 days a week throughout the
normal lifespan of the product.
