Daktronics BA-1518 User manual

Table of Contents
i
Generation IV
Multi-Section
Outdoor LED Scoreboards
Display Manual
ED-16960 Rev 2 – 19 November 2008
Models
BA-1518 FB-1424 FB-1830L MS-2118 SO-2014
BA-1524 FB-1430 FB-2001 MS-2918 SO-2030
BA-2006 FB-1524 FB-2002
BA-2007 FB-1530 FB-2003 SO-1424
BA-2012 FB-1624 FB-2004 SO-1624
BA-2013 FB-1630 FB-2007 SO-1830
BA-2020 FB-1630L SO-1830L
BA-3718 FB-1730 MS-2009 SO-1930
BA-3724 FB-1830 MS-2020 SO-2011

ED-16960
Product 1192
Rev 1 – 04 April 2008
Please fill in the information below for your display; use it for reference when
calling Daktronics for assistance.
Display Serial No. _____________________________________________
Display Model No.______________________________________________
Date Installed _________________________________________________
DAKTRONICS, INC.
Copyright ©2008
All rights reserved. While every precaution has been taken in the preparation of this manual,
the publisher assumes no responsibility for errors or omissions. No part of this book covered
by the copyrights hereon may be reproduced or copied in any form or by any means – graphic,
electronic, or mechanical, including photocopying, taping, or information storage and retrieval
systems – without written permission of the publisher.
All Sport®and PanaView®are trademarks of Daktronics, Inc. Other trademarks used in this manual are the
property of their respective owners.

Table of Contents
i
Table of Contents
Section 1: Introduction....................................................................................1-1
1.1 How to use this manual .............................................................................1-1
1.2 Daktronics Nomenclature..........................................................................1-2
1.3 Product Overview......................................................................................1-3
1.4 Model Names............................................................................................. 1-4
1.5 Product Safety Approval ...........................................................................1-4
Section 2: Model Identification.......................................................................2-3
Section 3: Specifications................................................................................3-1
Section 4: Component Locations...................................................................4-1
Section 5: Schematics.....................................................................................5-1
Section 6: Mechanical Installation.................................................................6-1
6.1 Scoreboard Protective Devices.................................................................. 6-1
6.2 Footings and Beams................................................................................... 6-1
6.3 Lifting the Scoreboard............................................................................... 6-4
6.4 Scoreboard Mounting ................................................................................ 6-5
Scoreboard Mounting Using Spacers................................................. 6-6
6.5 Ad Panel Mounting....................................................................................6-7
Section 7: Electrical Installation.....................................................................7-1
7.1 Power......................................................................................................... 7-1
Grounding...........................................................................................7-2
Power Installation...............................................................................7-2
7.2 Power and Signal Connection.................................................................... 7-3
Fiber Optic..........................................................................................7-4
Interconnect Harness Connections ..................................................... 7-5
Multiple Driver Connections.............................................................. 7-6
Section 8: Scoreboard Maintenance and Troubleshooting.........................8-1
8.1 Cabinet Specifications............................................................................... 8-1
8.2 Component Location and Access ..............................................................8-1
Replacing a Digit................................................................................8-2
Replacing a Digit Segment.................................................................8-3
Replacing a Driver..............................................................................8-4
8.3 Schematic ..................................................................................................8-4
8.4 LED Drivers .............................................................................................. 8-5
8.5 Segmentation and Digit Designation......................................................... 8-5
8.6 Lightning Protection..................................................................................8-6
8.7 Troubleshooting......................................................................................... 8-7
8.8 Replacement Parts ..................................................................................... 8-8
8.9 Daktronics Exchange and Repair and Return Programs......................... 8-10

ii Table of Contents
Exchange Program............................................................................8-10
Repair and Return Program..............................................................8-11
How to reach us................................................................................8-11
Section 9: Team Name Message Center Maintenance................................ 9-1
9.1 Team Name Message Center System Overview........................................9-1
9.2 Maintenance and Troubleshooting Overview............................................9-2
9.3 Signal Summary.........................................................................................9-2
9.4 Power Summary.........................................................................................9-2
9.5 Service and Diagnostics.............................................................................9-3
TNMC Controller...............................................................................9-3
Diagnostic LEDs.................................................................................9-4
Removing/Changing the Controller....................................................9-5
Modules and Drivers ..........................................................................9-7
Power Supplies...................................................................................9-8
Weatherstripping ................................................................................9-9
TNMC Display Maintenance..............................................................9-9
Troubleshooting..................................................................................9-9
Initialization Information at Startup .................................................9-10
Replacement Parts List.....................................................................9-10
Section 10: Scoreboard Options ................................................................... 10-1
10.1 Changeable Team Name Captions...........................................................10-1
10.2 Trumpet Horn ..........................................................................................10-2
Trumpet Horn Part Numbers............................................................10-2
10.3 Radio Control ..........................................................................................10-2
10.4 Portable Power Pack................................................................................10-3
Appendix A: Reference Drawings .........................................................................1
Appendix B: Eyebolts.............................................................................................1

Section 1: Introduction
This manual explains the installation of Daktronics Multi-Section Outdoor LED
Scoreboards and provides details for display maintenance. For other questions regarding the
safety, installation, operation or service of these systems, contact Daktronics Customer
Service at 1-877-605-1115. Customer Service information is listed in Section 8.9 of this
manual.
1.1 How to use this manual
Important Safeguards:
•Read and understand these instructions before installing the display.
•Do not drop the control console or allow it to get wet.
•Properly ground the scoreboard with a grounding electrode at the
scoreboard location.
•Disconnect power when the scoreboard is not in use.
•Disconnect power when servicing the scoreboard.
•Do not modify the scoreboard structure or attach any panels or
coverings to the scoreboard without the express written consent of
Daktronics, Inc.
Figure 1 illustrates the Daktronics drawing numbering system. Daktronics identifies
individual engineering drawings by their drawing number (7087-P08A-69945 in the
example), which is located in the lower right corner of the drawing. This manual
refers to drawings by their last set of numbers and the letter preceding them. The
example would be Drawing A-69945.
Figure 1: Daktronics Drawing Label
Reference drawings are grouped and inserted in alphanumeric order in Appendix A
and Appendix B.
Listed below are a number of drawing types commonly used by Daktronics, along
with the information that each is likely to provide.
System riser diagrams: overall system layout from control room to
display, power and phase requirements.
Introduction 1-1

Shop drawings: fan locations, transformer locations, mounting
information, power and signal entrance points and access method (front or
rear).
Schematics: power wiring, signal wiring, panelboard or power termination
panel assignments, signal termination panel assignments and transformer
assignments.
Final assembly: component locations, part numbers, display dimensions
and assembly/disassembly instructions.
All references to drawing numbers, appendices, figures, or other manuals are
presented in bold typeface, as in this example: “Refer to Drawing A-69945 for the
location of the driver enclosure.” Additionally, any drawings referenced within a
particular subsection are listed at the beginning of that subsection in the following
manner:
Reference Drawing:
Segmentation, 7 Seg Bar Digits.............................. Drawing A-69945
Daktronics identifies manuals by their engineering document (ED) number, which is
located on the cover page of the manual. For example, this manual would be referred
to as ED-16960.
The serial and model numbers of a Daktronics scoreboard can be found on the ID
label on the display. The label will be similar to the one shown in Figure 2. When
calling Daktronics Customer Service, please have this information available to
ensure that your request is serviced as quickly as possible. For future reference, note
your scoreboard model number, serial number and installation date on the second
page of this manual.
Figure 2: Scoreboard ID Label
Daktronics displays are built for long life and require little maintenance. However,
from time to time, certain display components will have to be replaced. The
Replacement Parts List in Section 8.8 provides the names and part numbers of
components that may require replacement during the life of this display.
Following the Replacement Parts List is an explanation of Daktronics exchange and
replacement programs. Refer to these instructions if repaired or replacement parts are
needed.
1.2 Daktronics Nomenclature
To fully understand some Daktronics drawings, such as schematics, it is necessary to
know how various components are labeled in those drawings. This information is
useful when trying to communicate maintenance or troubleshooting efforts.
The label “A” on a drawing item typically denotes an assembly. An assembly can be
1-2 Introduction

Introduction 1-3
a single circuit board or a collection of components that function together, usually
mounted on a single plate or in a single enclosure.
In addition, the following labeling formats might be found on various Daktronics
drawings:
“TB _ _” denotes a termination block for power or signal cable.
“F _ _” denotes a fuse.
“E _ _” denotes a grounding point.
“J _ _” denotes a power or signal jack.
“P _ _” denotes a power or signal plug for the opposite jack.
Finally, Daktronics part numbers are commonly found on drawings. Those part
numbers can be used when requesting replacement parts from Daktronics Customer
Service. Take note of the following part number formats. (Not all possible formats
are listed here.)
“0P- _ _ _ _- _ _ _ _” denotes an individual circuit board, such as a driver
board.
“0A-_ _ _ _ - _ _ _ _” denotes an assembly, such as a circuit board and the
plate or bracket to which it is mounted. A collection of circuit boards
working as a single unit may also carry an assembly label.
“W- _ _ _ _ ” denotes a wire or cable. Cables may also carry the assembly
numbering format in certain circumstances. This is especially true for
ribbon cables.
“F- _ _ _ _ ” denotes a fuse.
“T- _ _ _ _ ” denotes a transformer.
“PR- _ _ _ _ _ - _” denotes a specially ordered part.
“M- _ _ _ ” denotes a metal part, and “0S-_ _ _ _ _ _” typically denotes a
fabricated metal assembly.
1.3 Product Overview
The Daktronics outdoor LED scoreboards are part of a family of scoring and timing
displays designed to offer easy installation, readability, and reliability.
Microprocessor control assures consistent operation and accuracy.
Featuring large, highly visible PanaView®digits 15, 18, 24, and 30" tall, the
scoreboards use light emitting diodes, or LEDs, to illuminate the display. LEDs are
tiny, solid-state components that use a semiconductor chip to transform electrical
current into light; they are high-intensity, low-energy lighting units. Scoreboards in
this series typically use red or amber LEDs for optimum outdoor readability.
Because of their LED technology, the scoreboards consume little power – barely
more than a single household lamp. Power usage for displays in this series ranges
from 300 W to a maximum of 1500 W.
Each of the sections in this manual contains model-specific information, including
physical dimensions, digit configuration, and power requirements. The scoreboard
engineering drawings, located in Appendix A, also list dimensions, weight and
mounting instructions for each display. Additionally, scoreboard model numbers and
electrical requirements can be found on a label on the scoreboard entrance panel.

1-4 Introduction
The outdoor LED displays are modular in construction, typically with a top and a
bottom section, but some are comprised of as many as four different sections. The
units are shipped separately and joined at installation. Unpowered sections,
connected to the internal power and signal enclosure with cabling, are referred to as
“slave” sections, while those housing the electronic control components are
“masters.”
Cabinets for the displays, available in more than 150 colors, are constructed of
heavy-gauge aluminum. Digit and indicator faceplates are black, and they are set
directly into the scoreboard surface. Permanent captions and optional striping are
white vinyl.
Note: Some drawings and text in this manual refer to team name message centers or
TNMCs.
Team name message centers are scoreboard-mounted, matrix LED units, which
electronically display home and guest team names. TNMCs are available as a
standard new scoreboard option with several of the models in this series, and the
message centers are also available for retrofit on existing scoreboards. Section 9 of
this manual offers step-by-step information on TNMC maintenance and
troubleshooting.
The outdoor LED scoreboards are designed for use with an All Sport®5000 Series
control console. The console uses All Sport keyboard overlays
(sport inserts) for game control, and the boards operate without modification on All
Sport 5000 signal protocol. Refer to the following controller manual for operating
instructions:
ED-11976: All Sport 5000 Series Control Console Operation Manual
1.4 Model Names
Daktronics scoreboards are differentiated by their model numbers: BA-1518, for
example, designates a specific baseball scoreboard. The two-letter prefixes for
scoreboards in this manual include the following: BA – baseball; CR – cricket; FB –
football; MS – multisport; and SO – soccer.
Most Daktronics scoreboards carry a two-number suffix that refers to indoor-outdoor
status and digit color: -11 are outdoor scoreboards, 120 V and they feature red digits;
-21 are outdoor scoreboards, 120 V and feature amber digits.
1.5 Product Safety Approval
Daktronics outdoor scoreboards are ETL listed and tested to CSA standards for
outdoor use. Contact Daktronics for information regarding testing procedures.

Model Identification 2-1
Section 2: Model Identification
Use the following drawings to determine the model number of your scoreboard. The drawings
listed here are located in Appendix A: Reference Drawings; where they are inserted in
alphanumeric order by drawing number. Individual scoreboard drawings may also be found in
the Appendix.
Reference Drawings:
Multiple Section Football SCBD Models...............................Drawing A-42148
Multiple Section Football SCBD Models, w/TNMC ..............Drawing A-84233
Multiple Section Soccer SCBD Models................................Drawing A-98161
Multiple Section Baseball Scoreboard Models...................Drawing A-126086
Multiple Section Baseball SCBD Models, w/TNMC ...........Drawing A-126362
Multiple Section Soccer SCBD Models, w/TNMC..............Drawing A-128172
Note: Not all models are listed in these drawings.

Specifications
3-1
Section 3: Specifications
The table on the following pages shows all of the mechanical specifications, circuit specifications and maximum power requirements for each
model in this manual. Models are listed in alphanumeric order.
Notes: Driver address settings can be configured using the J19 address plug or by using the new S1 dip switch found on all GEN IV
drivers. See Section 8.4 for more details.
Signal wires must be a minimum of 22 AWG with shield. Daktronics recommends using W-1614.
Models with an –11 or –12 suffix feature red digits and indicators; suffixes –21 and –22 indicate amber digits.
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
BA-1518 2 Total
Top
Bottom
H8’-0”, W16’-0”, D6”
(2438 mm, 4877
mm, 152 mm)
H3’-0”, W16’-0”, D6”
(914 mm, 4877 mm,
152 mm)
H5’-0”, W16’-0”, D6”
(1524 mm, 4877
mm, 152 mm)
400 lb
(182 kg)
845 lb
(383 kg)
Indicators 2”
(51 mm)
All Others
18” (457
mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 63
BA-1518
w/TNMC 2 Total
Top
Bottom
H8’-0”, W16’-0”, D6”
(2438 mm, 4877
mm, 152 mm)
H3’-0”, W16’-0”, D6”
(914 mm, 4877 mm,
152 mm)
H5’-0”, W16’-0”, D6”
(1524 mm, 4877
mm, 152 mm
480 lb
(218 kg)
912 lb
(414 kg)
Indicators 2”
(51 mm)
All Others
18” (457
mm)
-11: red
-21: amber
600 W
(w/red
TNMC)
600 W
(w/amber
TNMC)
120 V AC 5.0 A
5.0
A1 63

3-2 Specifications
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
BA-1524 2 Total
Top
Bottom
H9’-0”, W16’-0”, D6”
(2743 mm, 4877
mm, 152 mm)
H4’-0”, W16’-0”, D6”
(1219 mm, 4877
mm, 152 mm)
H5’-0”, W16’-0”, D6”
(1524 mm, 4877
mm, 152 mm)
480 lb
(218 kg)
912 lb
(414 kg)
Indicators 2”
(51 mm)
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 63
BA-1524
w/TNMC 2 Total
Top
Bottom
H9’-0”, W16’-0”, D6”
(2743 mm, 4877
mm, 152 mm)
H4’-0”, W16’-0”, D6”
(1219 mm, 4877
mm, 152 mm)
H5’-0”, W16’-0”, D6”
(1524 mm, 4877
mm, 152 mm)
600 lb
(273 kg)
1140 lb
(517 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
600 W
(w/red
TNMC)
600 W
(w/amber
TNMC)
120 V AC 5.0 A
5.0 A
A1 64
A2 65
A3 66

Specifications 3-3
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
BA-2006 2 Total
Top
Bottom
H7’-0”, W28’-0”, D6”
(2134 mm, 8534
mm, 152 mm)
H3’-0”, W14’-0”, D6”
(914 mm, 4267 mm,
152 mm)
H4’-0”, W14’-0”, D6”
(1219 mm, 4267
mm, 152 mm
640 lb
(290 kg)
2 Crates
825 lb
(374 kg)
525 lb
(238 kg)
Innings,
Runs, Hits
and Errors
15” (9381
mm)
All Others
18” (457
mm)
-11: red
-21: amber
1200 W 120 V AC 10 A A1 64
A2 65
A3 66
BA-2006
w/TNMC 4 Total
2 Top
2 Bottom
H7’-0”, W28’-0”, D6”
(2134 mm, 8534
mm, 152 mm)
H3’-0”, W14’-0”, D6”
(914 mm, 4267 mm,
152 mm)
H4’-0”, W14’-0”, D6”
(1219 mm, 4267
mm, 152 mm)
720 lb
(327 kg)
2 crates
700 lb
(318 kg)
1125 lb
(510 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
1500 W
(w/red
TNMC)
1500 W
(w/amber
TNMC)
120 V AC 12.5 A
12.5 A
A1 64
A2 65
A3 66

3-4 Specifications
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
BA-2007 2 Total
Top
Bottom
H9’-4”, W36’-0”, D8”
(2845 mm, 10973
mm, 203 mm)
H4’-0”, W18’-0”, D8”
(1219 mm, 5486
mm, 203 mm)
H5’-4”, W18’-0”, D8”
(1626 mm, 5486
mm, 203 mm)
840 lb
(381 kg)
2 crates
700 lb
(318 kg)
1125 lb
(510 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
1200 W 120 V AC 10.0 A A1 64
A2 65
A3 66
A4 11
BA-2007
w/TNMC 4 Total
2 Top
2 Bottom
H9’-4”, W36’-0”, D8”
(2845 mm, 10973
mm, 203 mm)
H4’-0”, W18’-0”, D8”
(1219 mm, 5486
mm, 203 mm)
H5’-4”, W18’-0”, D8”
(1626 mm, 5486
mm, 203 mm)
960 lb
(435 kg)
2 crates
700 lb
(318 kg)
1125 lb
(510 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
1500 W
(w/red
TNMC)
1500 W
(w/amber
TNMC)
120 V AC 12.5 A
12.5 A
A1 64
A2 65
A3 66
A4 11
BA-2012 2 Total
Top and
Bottom
H8’0”, W16’-0”, D6”
(2438 mm, 4877
mm, 152 mm)
H4’0”, W16’-0”, D6”
(1219 mm, 4877
mm, 152 mm)
350 lb
(159 kg)
820 lb
(372 kg)
All Digits 24”
(610 mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 61

Specifications 3-5
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
BA-2013 2 Total
Top
Bottom
H9’4”, W36’-0”, D6”
(2845 mm, 10973
mm, 152 mm)
H3’0”, W18’-0”, D6”
(914 mm, 5486 mm,
152 mm)
H5’4”, W18’-0”, D6”
(1626 mm, 5486
mm, 152 mm)
840 lb
(382 kg)
2 Crates
825 lb
(374 kg)
1125 lb
(510 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
1500 W 120 V AC 12.5 A A1 64
A2 65
A3 66
A4 4
A5 11
BA-2013
w/TNMC 4 Total
2 Top
2 Bottom
H9’4”, W36’-0”, D6”
(2845 mm, 10973
mm, 152 mm)
H3’0”, W18’-0”, D6”
(914 mm, 5486 mm,
152 mm)
H5’4”, W18’-0”, D6”
(1626 mm, 5486
mm, 152 mm)
960 lb
(434 kg)
2 Crates
985 lb
(447 kg)
1125 lb
(510 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
1800 W
(w/red
TNMC)
1800 W
(w/amber
TNMC)
120 V AC 15.0 A
15.0 A
A1 64
A2 65
A3 66
A4 4
A5 11
BA-2020 2 Total
Top and
Bottom
H8’0”, W16’-0”, D6”
(2438 mm, 4877
mm, 152 mm)
H4’0”, W16’-0”, D6”
(1219 mm, 4877
mm, 152 mm)
350 lb
(159 kg)
820 lb
(372 kg)
All Digits 24”
(610 mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 12

3-6 Specifications
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
BA-3718 4 Total
2 Top
2 Bottom
H7’-0”, W28’-0”, D6”
(2134 mm, 8534
mm, 152 mm)
H3’-0”, W14’-0”, D6”
(2134 mm, 4267
mm, 152 mm)
H4’-0”, W14’-0”, D6”
(1219 mm, 4267
mm, 152 mm)
640 lb
(290 kg)
2 Crates
825 lb
(374 kg)
525 lb
(238 kg)
Innings,
Runs, Hits
and Errors
15” (9381
mm)
All Others
18” (457
mm)
-11: red
-21: amber
900 W 120 V AC 7.5 A A1 64
A2 65
A3 66
BA-3718
w/TNMC 4 Total
2 Top
2 Bottom
H7’-0”, W28’-0”, D6”
(2134 mm, 8534
mm, 152 mm)
H3’-0”, W14’-0”, D6”
(914 mm, 4267 mm,
152 mm)
H4’-0”, W14’-0”, D6”
(1219 mm, 4267
mm, 152 mm)
720 lb
(327 kg)
2 Crates
746 lb
(338 kg)
468 lb
(212 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
1200 W
(w/red
TNMC)
1200 W
(w/amber
TNMC)
120 V AC 10.0 A
10.0 A
A1 64
A2 65
A3 66

Specifications 3-7
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
BA-3724 4 Total
2 Top
2 Bottom
H9’-4”, W36’-0”, D6”
(2845 mm, 10973
mm, 152 mm)
H4’-0”, W18’-0”, D6”
(1219 mm, 5486
mm, 152 mm)
H5’-4”, W18’-0”, D6”
(1626 mm, 5486
mm, 152 mm)
840 lb
(381 kg)
2 Crates
700 lb
(318 kg)
1125 lb
(510 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
900 W 120 V AC 7.5 A A1 64
A2 65
A3 66
BA-3724
w/TNMC 4 Total
2 Top
2 Bottom
H9’-4”, W36’-0”, D6”
(2845 mm, 10973
mm, 152 mm)
H4’-0”, W18’-0”, D6”
(1219 mm, 5486
mm, 152 mm)
H5’-4”, W18’-0”, D6”
(1626 mm, 5486
mm, 152 mm)
960 lb
(435 kg)
2 Crates
856 lb
(388 kg)
1112 lb
(504 kg)
Innings,
Runs, Hits
and Errors
18” (457
mm)
All Others
24” (610
mm)
-11: red
-21: amber
1200 W
(w/red
TNMC)
1200 W
(w/amber
TNMC)
120 V AC 10.0 A
10.0 A
A1 64
A2 65
A3 66
FB-1424 2 Total
Top and
Bottom
H8’-0”, W18’-0”, D6”
(2438 mm, 5486
mm, 152 mm)
H4’-0”, W18’-0”, D6”
(1219 mm, 5486
mm, 152 mm)
400 lb
(182 kg)
805 lb
(365 kg)
Indicators 8”
(203 mm)
All Others
24” (610
mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 12

3-8 Specifications
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
FB-1424
w/TNMC 2 Total
Top and
Bottom
H8’-0”, W18’-0”, D6”
(2438 mm, 5486
mm, 152 mm)
H4’-0”, W18’-0”, D6”
(2438 mm, 5486
mm, 152 mm)
520 lb
(236 kg)
988 lb
(448 kg)
Indicators 8”
(203 mm)
All Others
24” (610
mm)
-11: red
-21: amber
600 W
(w/red
TNMC)
600 W
(w/amber
TNMC)
120 V AC 5.0 A
50. A
A1 12
FB-1430 2 Total
Top and
Bottom
H8’-0”, W25’-0”, D6”
(2438 mm, 7620
mm, 152 mm)
H4’-0”, W25’-0”, D6”
(1219 mm, 7620
mm, 152 mm)
560 lb
(254 kg)
1064 lb
(483 kg)
Clock 30”
(762 mm)
All Others
24” (610
mm)
Indicators 8”
(203 mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 12
FB-1430
w/TNMC 2 Total
Top and
Bottom
H8’-0”, W25’-0”, D6”
(2438 mm, 7620
mm, 152 mm)
H4’-0”, W25’-0”, D6”
(1219 mm, 7620
mm, 152 mm)
680
(308 kg)
1292 lb
(586 kg)
Clock 30”
(762 mm)
All Others
24” (610
mm)
Indicators 8”
(203 mm)
-11: red
-21: amber
600 W
(w/red
TNMC)
600 W
(w/amber
TNMC)
120 V AC 5.0 A
5.0 A
A1 12

Specifications 3-9
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
FB-1524 2 Total
Top and
Bottom
H8’-0”, W18’-0”, D6”
(2438 mm, 5486
mm, 152 mm)
H8’-0”, W18’-0”, D6”
(2438 mm, 5486
mm, 152 mm)
400 lb
(181 kg)
805 lb
(365 kg)
Indicators 8”
(203 mm)
All Others 24”
(610 mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 12
FB-1524
w/TNMC 2 Total
Top and
Bottom
H8’-0”, W18’-0”, D6”
(2438 mm, 5486
mm, 152 mm)
H4’-0”, W18’-0”, D6”
(1219 mm, 5486
mm, 152 mm)
520 lb
(236 kg)
988 lb
(448 kg)
Indicators 8”
(203 mm)
All Others 24”
(610 mm)
-11: red
-21: amber
600 W
(w/red
TNMC)
600 W
(w/amber
TNMC)
120 V AC 5.0 A
5.0 A
A1 12
FB-1530 2 Total
Top and
Bottom
H8’-0”, W25’-0”, D6”
(2438 mm, 7620
mm, 152 mm)
H4’-0”, W25’-0”, D6”
(1219 mm, 7620
mm, 152 mm)
580 lb
(263 kg)
1102 lb
(500 kg)
Clock 30”
(762 mm)
All Others
24” (610
mm)
Indicators 8”
(203 mm)
-11: red
-21: amber
300 W 120 V AC 2.5 A A1 12

3-10 Specifications
Model Number of
Sections Dimensions (Height, Width,
Depth)
Weight
Uncrated
(Crated)
Digit Size
Digit Color
Maximum
Wattage Power Amps per Line
(Single
Phase)
Driver
Number
and
Address
FB-1530
w/TMNC 2 Total
Top and
Bottom
H8’-0”, W25’-0”, D6”
(2438 mm, 7620
mm, 152 mm)
H4’-0”, W25’-0”, D6”
(1219 mm, 7620
mm, 152 mm)
700 lb
(318 kg)
1330 lb
(603 kg)
Clock 30”
(457 mm)
All Others
24” (610
mm)
Indicators 8”
(203 mm)
-11: red
-21: amber
600 W
(w/red
TNMC)
600 W
(w/amber
TNMC)
120 V AC 5.0 A
5.0 A
A1 12
FB-1624 2 Total
Top and
Bottom
H8’-0”, W18’-0”, D6”
(2438 mm, 5486
mm, 152 mm)
H4’-0”, W18’-0”, D6”
(1219 mm, 5486
mm, 152 mm)
440 lb
(200 kg)
836 lb
(379 kg)
Indicators 8”
(203 mm)
All others
24” (610
mm)
-11: red
-21: amber
600 W 120 V AC 5.0 A A1 15
A2 16
FB-1630 2 Total
Top and
Bottom
H8’-0”, W25’-0”, D6”
(2438 mm, 7620
mm, 152 mm)
H4’-0”, W25’-0”, D6”
(1219 mm, 7620
mm, 152 mm)
600 lb
(272 kg)
1140 lb
(517 kg)
Clock 30”
(762 mm)
TOL 18”
(457 mm)
Indicators 8”
(203 mm)
All Others
24” (610
mm)
-11: red
-21: amber
600 W 120 V AC 5.0 A A1 15
A2 16