Dali S240 User manual

Thermal Imaging Monocular S240
Quick Start Guide
Outline buttons and interfaces
Buttons & Functions
Power Button
Long press 3S to switch ON/OFF the camera. Green color indicator will be
turned on after the camera is powered on.
Short click to make NUC (non-uniformity correction) to the camera if needed.
Electrical Zoom
Short click to switch between X2, X3, X4 image digital zoom, the goal can
be amplified in real time
Long press 3 seconds to open the WIFI image transfer function, the wifi
logo will be displayed in the upper right corner of the image display.
In the Android or apple app store search IR-
TRACKER ,install the app. Switch on (long press " "
button for 3S)the WiFi function, use the mobile phone to find hot
spot "CHD-BE:XX", enter the password to connect "12345678"
Zoom/WIFI
Brightness/ Laser
Palette/Hot spot
tracking
Power / NUC
Power indicator

after a successful connection, run the app” IR-TRACKER”in the
cell phone, click "connect" then press confirm on the pop-up
menu. The default password is “chird” and it can not be
changed . then the live images can be seen. through mobile
app, customers can have taking picture, video recording,
playback, storage functions.
Brightness
Short press to adjust the brightness level of the eyepiece (Level 5), adjust
the brightness according to the site environment.
Long press 3 seconds to open the laser pointer function.
Polarity (Palette)
Short press switch display built-in color palettes black hot, white hot and
red hot, there are three kinds of color palettes embeded
long press 3 seconds to open the image focus tracking function
Hot spot tracking
Long press " " button 3S, open the hot spot tracking
function, the maximum temperature of the screen can be
displayed on the cursor tracking.

Visual Adjustment Knob
Adjust the knob according to the degree of personal myopia.
USB Charge
When charging, through the instrument at the bottom of the USB cover,
insert the USB charging cable to charge (voltage DC5V).
When charging, the red indicator light is bright, and the charge is finished
as the green indicator light.
Video Output
Open the rubber cover at the bottom of the camera can find the video
interface , insert the video cable configuration, access display with displayer
or other long-distance transmission.
Laser Pointer
Long press " " button 3S, open the laser pointer function,
can be used to image center area target location
Important Notes
For uncooled infrared telescope using a very sensitive
thermal reactor, so in any case (boot or shutdown) shall not
be the lens directly aligned with strong radiation source
(such as the sun, laser beam shines or reflex), otherwise it
Visual
Adjustment
Knob
USBport for
charging
Lens
Eyepiece
Video Output
Hole for tripod
Laser pointer

will bring permanent damage to the uncooled infrared
telescope!
Please do not point the laser pointer to the human eye after
it is switched on, so as to avoid damage!
The camera will be switched into the standby mode
automaticly if there is no operation done to the camera within
5 minutes and can be waked up by clicking on any button.
For the first time, please check the battery. For USB charging please put
the instrument in the environment below 40℃ .
Please do not open the enclosure or do any modify to the
camera , the maintenance and repair of the camera can only
be done by the authorized person by our company.