DAM HINGE User manual

hingehinge
assembly
range / easy now
code / sr056 (4) . sr073 (3) . sr064 (1)
year / 2013

description
The utilitarian Hinge unit is available in
various colours and congurations: 1 door,
3 door or 4 door.
assembly
Depending on how your product was delivered
and packaged some steps in this manual can
be skipped as you might receive a fully or
partially-assembled product.
care and maintenance
Go to www.dokterandmisses.com/care
for specic instructions on how to care
for your product.
contents
1 x hinge unit (Part A)
4 x timber legs (Parts B)
1 x allen key
12 x plastic spring washers
12 x cap screws
to assemble, you will need
1 x soft blanket or bubble-wrap
1 x Pozidriv (SupaDriv) PZ screwdriver
2 x people
x 12
x 12
x 1
x 4
b
a
a
a

step 1
Lay the steel body of the Hinge unit
(Part A) upside down on a blanket or
bubble-wrap as shown above.
note
Make sure that the doors of the unit are
held / taped closed while ipping the unit.
how to assemble this product
step 2
Unscrew the screws with black washers
from the wooden legs (Part B), match
the coloured stickers and align the
corresponding holes with those on the steel
frame.
a
b
bb
b

step 3
Insert screws, together with washers and
tighten using the allen key provided. Use
a screw driver to hold the screws in the
wooden legs in place while tightening.
step 4
Turn the unit over (2 people required) and
tighten screws.
note: Tighten screws from time to time.

thank you for recycling
Please support responsible environmental management by recycling product packaging.
we really do care
We make each product with great care and attention to detail.
If you experience any problems with this product, please let us know.
We are always working to improve on our products.
Your feedback is valuable to us.