Danby Silhouette DWC516BLS User manual

OWNER’S MANUAL
GUIDE DU PROPRIÉTAIRE
MANUAL DEL USUARIO
CAUTION:
Read and Follow All Safety Rules and
Operating Instructions Before First
Use of This Product.
SAVE THESE INSTRUCTIONS!
ATTENTION :
Avant de faire fonctionner cette
machine, lisez et suivez toutes les
consignes de sécurité de ce guide en
premier lieu.
SAUVEGARDEZ CES
INSTRUCTIONS!
ATENCIÓN:
Lea y Siga Todas las Indicaciones de
Seguridad y de Operación Antes de
Utilizar Este Producto.
¡CONSERVE ESTAS
INSTRUCCIONES!
Table of Contents . . . . . . . . . . . . . . . . . . . . 1
Table des matières . . . . . . . . . . . . . . . . . . . 13
Índice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
Danby Products Limited, Guelph, Ontario Canada N1H 6Z9
Danby Products Inc., Findlay,Ohio USA 45840
Version 1.09.06
DWC516BLS
R

Important Safety Information
Safety Precautions 3
Grounding Instructions 4
Operating Instructions
Features of Your Wine Cooler 5
The Controls of Your Wine Cooler 6
Setting the Temperature 6
Wine Storage 7
Shelf Instructions 7
Installation Instructions
Tools You Will Need 8
Preparing the Enclosure 8
Door Swing Reversal 9
Care and Cleaning
Helpful Hints 10
How to Clean the Inside 10
How to Clean the Outside 10
Trouble Shooting
Before You Call For Service 11
Warranty 12
3
5
10
11
1
TABLE OF CONTENTS
8

2
WELCOME
NEED HELP?
Welcome to the
Danby family. We’re
proud of our quality
products and we
believe in dependable
service.
You’ll see it in this
easy-to-use manual
and you’ll hear it in the
friendly voices of our
consumer service
department.
Tel:1-800-26-
Best of all, you’ll
experience these
values each time you
use your wine cooler.
That’s important,
because your new
appliance will be part
of your family for a
long time.
Before you call for service,
there are a few things you
can do to help us serve
you better...
Read this manual
It contains instructions to
help you use and maintain
your wine cooler properly.
If you received a
damaged appliance
Immediately contact the
dealer (or builder) that sold
you the wine cooler.
Save time and money
Check the Trouble Shooting
section before calling. This
section helps you solve
common problems that may
occur.
If you do need service, you
can relax knowing help is
only a phone call away.
Tel: 1-800-26-
Write down the model and serial
numbers here. They are on a label
located on the back of the wine
cooler.
Model number DWC516BLS
Serial number ______________
Date purchased ______________
Staple your receipt to the inside
back cover of this manual. You will
need it to obtain service under
warranty.
Start Here!…Before using your Wine Cooler

READ ALL SAFETY INFORMATION BEFORE USING
3
IMPORTANT SAFETY INFORMATION
WARNING
SAFETY
PRECAUTIONS
•This appliance is intended
for household use only. Do
not attempt to operate or
store this appliance out-
doors.
•This appliance must be
grounded. Connect only to a
properly grounded outlet.
See “Grounding Instructions”
section on page 4.
•Do not operate this appliance
if it has a damaged power cord
or plug, if it is not working
properly, or if the appliance has
been damaged or dropped.
•Do not splice the power cord
that is equipped with this appli-
ance.
•Keep power cord away from
heated surfaces.
•Do not immerse power cord,
plug or the appliance itself in
water.
•Do not use this product near
water-for example, in a wet
basement, near a swimming
pool or near a sink.
•Do not use corrosive
chemicals or vapors in this
appliance.
•Use this appliance only for
it’s intended use, asdescribed
in this manual.
•Do not store perishable food
items such as (but not limited
to) meats and dairy products
in your wine cooler.
•Store wine in sealed bottles
only.
•See door surface cleaning
instructions in the Care and
Cleaning section(s) of this
manual.
•Do not cover or block any
openings on the appliance.
•This appliance should be
serviced only by qualified serv-
ice personnel. Contact the
nearest authorized service
facility for examination, repair
or adjustment.
SAVE THESE INSTRUCTIONS!
DANGER, RISK OF CHILD ENTRAPMENT!
An empty wine cooler is a very dangerous attraction to children. Remove either the gasket,
latches, lids, lock and/or doors from unused or discarded appliances, or take some other action
to guarantee it harmless.
DON’T WAIT, DO IT NOW!
Toreduce the risk of fire, burns, electric shock, or injury to persons when using your appliance,
follow basic precautions, including the following sections;

4
This appliance must be
grounded. In the event of an
electrical short circuit, ground-
ing reduces the risk of electric
shock by providing an escape
wire for the electric current.
This appliance is equipped
with a power cord having a
grounding wire with a ground-
ing plug. The plug must be
plugged into an outlet that is
properly installed and ground-
ed.
Consult a qualified electrician
or service technician if the
grounding instructions are not
completely understood, or if
doubt exists as to whether the
appliance is properly ground-
ed.
If the outlet is a standard 2-
prong wall outlet, it is your per-
sonal responsibility and obliga-
tion to have it replaced with a
properly grounded 3-prong
wall outlet.
For best operation, plug this
appliance into its own electri-
cal outlet to prevent flickering
of lights, blowing of fuse or
tripping of circuit breaker.
Do not under any circum-
stances cut or remove the
third (ground) prong from the
power cord.
Do not use an adapter plug
with this appliance.
Do not use an extension
cord with this appliance. If the
power cord is too short, have
aqualified electrician or serv-
ice technician install an outlet
near the appliance.
GROUNDING
INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
WARNING
Improper use of the
grounding plug can result
in a risk of electric shock.

5
Operating Instructions
1
2
3
4
5
67
8
1. Tempered Glass Door: Tinted for UV
protection while still allowing for easy interior
viewing.
2. Electronic Controls: For regulating
the temperature of the wine cooler.
3. Magnetic Door Gasket: Tight fitting
seals retain all the cooling power and humid-
ity levels.
4.Shelves: Partially slide out for easy
access to your wine.
5. Child Proof Lock
6. Front Mounted Exhaust: Allows for
integrated (built-in) applications.
7. Interior Light Toggle Switch: To
manually illuminate/extinguish the interior
lights, while door remains closed.
8. Leveling Legs
9. Interior Lights (
not shown ):
Illuminates the compartment when the door
is opened.
Features of your
Wine Cooler

6
Operating Instructions
1
2345
Setting the
Temperature
•To switch the display
between the Fahrenheit (°F)
and Celsius (°C) scale,
depress the ‘Set Upper’ and
‘Set Lower’ control buttons
simultaneously for approximate-
ly five (5) seconds.
•The temperature range can
be set as low as 39°F(4°C) or
as high as 64°F(18°C) to suit
your specific wine storage
requirements. Each depres-
sion of the ‘Set Upper’ or ‘Set
Lower’ button will allow you to
adjust the temperature in 1°
degree increments within the
aforementioned range.
•You may view your ‘set’ tem-
perature at any time by briefly
depressing either the ‘Set
Upper’ or ‘Set Lower’ button.
The
set temperature will flash
in the display area for 5 sec-
onds before the display
resumes showing the
current
cabinet temperature.
Please note: In the event of a
power failure or interruption,
all modified settings are lost
and the default settings are
used once power resumes.
The Controls of
your Wine Cooler
1. Run: Indicator light illuminates to signify
the cooling mode is currently in opera-
tion.
2. Upper Chamber Display: Display
screen shows current cabinet tempera-
ture and set temperature of the upper
zone.
3. Lower Chamber Display: Display
screen shows current cabinet tempera-
ture and set temperature of the lower
zone.
4. C° / F°
Adjacent indicator light denotes which
scale of temperature is displayed.
5. ‘Set Upper’ Button - Used to set the
temperature in the upper zone (see
‘Setting the Temperature below).
‘Set Lower’ Button - Used to set the
temperature in the lower zone (see
‘Setting the Temperature below).
When you plug in your
wine cooler for the first
time, the temperature will
automatically be set to
45°F (7°C) and 54°F (12°C)
in the lower and upper
compartments respective-
ly,and will be displayed
in the Fahrenheit scale

Operating Instructions
Inorder to achieve the maxi-
mum storage capacity of fifty-
one (51) bottles, it will be
necessary to position the bot-
tles alternately on the upper
five (5) shelves, as shown in
Fig A.This will allow for the
storage of nine (9) 750 ml
bottles per shelf in each of
the top five shelves, and six
(6) bottles on the bottom shelf
(Fig B)for a total storage
capacity of fifty-one (51) wine
bottles.
If humidity conditions are low,
it will be necessary to use the
humidors. Fill the humidors
about 3/4 full with fresh water,
and place one humidor on the
bottom shelf of each section.
Check the water level occa-
sionally and refill as necessary.
NOTE: The use of the hum-
diors will reduce the storage
capacity of the shelves on
which they are placed on by
Wine
Storage
The * maximum capacity of
the DWC516 is 51 (750ml)
wine bottles.
*
When stocked as per
instructions and when the
humidors are not in use.
7
Fig A Fig B
Shelf Instructions
Lock
Screw Shelf
Stopper
To remove a shelf from it’s
locked position, remove the
shelf stoppers located on
either side of the shelf as
shown in Fig C, and pull out-
ward.
To re-install, ensure the shelf
is resting securely on the
support brackets and push
the shelf in completely, then
re-install the shelf stoppers.
Please Note: The bottom
shelf is not secured in place
(locked). Do not attempt to
pull on the shelf when it is
stocked.
IMPORTANT!
Do not cover shelves with
aluminum foil or any other
material that will prevent
adequate air circulation
within the cabinet.
Fig C

8
Installation Instructions - Integrated Application
Preparing the
Enclosure
FOR YOUR SAFETY:
While performing
installations described in
this section, gloves, safety
glasses or goggles should
be worn.
34-½" From
Underside of
Countertop to
Floor
2"
6"
Electrical Access
1-½" dia. hole
*If electrical
outlet is in
adjacent
cabinetry *
24"
Tools You Will
Need
Carpenter’s
Square
Measuring
Tape
Level
Drill & Hole Saw set
Gloves
Safety Glasses
Flashlight
Electrical Requirements:
The appliance must be
connected to an individual
properly grounded electrical
outlet, protected by a 15
ampere circuit breaker or
time delay fuse.
Important: It is recommended
that you install the wine cooler in
alocation that allows the door to
have a greater then 45° opening
swing. Alimited door swing will
prevent the shelves from sliding
out as intended, and may lead
to damaging the door gasket.
•The rough cabinet opening
must be on a level floor area
and at least 24” deep*by 12-1/2”
wide. The opening should also
have a height of at least 34-1/2”.
•The electrical outlet may be
positioned from within either
side of the adjacent cabinetry,or
the rear of the shaded area (as
shown in Fig C.).
Note: If the electrical outlet is
surface mounted (not flush) within
the enclosure, the depth
requirment for the installation
will be affected.
•If the electrical outlet is located
inside the adjacent cabinetry,cut
a1-1/2” diameter hole to admit
the power cord.
Fig C
*The listed depth requirment for the installation is assuming that the electrical outlet is located in the adja-
cent cabinetry or is flush mounted in the rear wall, not surface mounted in the enclosure.
Philips
Screwdriver

Installation Instructions - Door Swing Reversal
FIG 1A
9
1. Unplug the unit from electrical oulet (if connect-
ed) and lay it on it’s back.
2. Open the door until the screws securing the
lower door support bracket are exposed on the
bottom of the door (Fig 1B).
3. Remove the screw that is closest to the hinge assem-
bly and gently close the door to remove the remaining
screw from the support bracket.
4. Swing the door slightly towards the left side in
order to remove the support bracket from the door
and the lower hinge assembly.
5. Pull the door downward to remove it from the
cabinet of the wine cooler.
6. Remove the cap from the top left side of the
door (Fig 1D)and reinstall it on the top right side.
7. Remove the three (3) screws supporting the
top hinge (Fig 1A)and the three (3) screws sup-
porting the bottom
hinge.
8. Remove the plastic caps from the left side of
the frame (Fig 1C)and reinstall them on the right
side of the frame (the previous hinge location).
9. Install the new left hand hinge assembly (sup-
plied with unit) on the left side of the frame.
10. Insert the lower door support into the left side
bottom hinge.
11. Carefully reposition the door firstly into the left
side upper hinge assembly then onto the lower
door support bracket.
12. While the door remains closed install the first
screw into the lower support bracket.
13. Open the door and install the screw that is
closest to the hinge assembly.
14. Close the door and return the unit into it’s
upright position (wait 60 mins before reconnect-
ing power to the wine cooler), verify the door
alignment and proper seal against the cabinet.
FIG 1C Plastic Caps (3)
Upper Hinge
FIG 1D
Door Plug
Lower Hinge Assembly
and Door Support Bracket
FIG 1B