Danfoss M46 User manual

MAKING MODERN LIVING POSSIBLE
Electrical Installation
M46 Pumps
HC EDC
powersolutions.danfoss.com

Revision history Table of revisions
Date Changed Rev
September 2015 Minor layout revision AB
June 2014 First edition AA
Electrical Installation M46 Pumps HC EDC
2L1427804 • Rev AB • September 2015

Literature references Literature references.......................................................................................................................................................................4
Latest version of technical literature.........................................................................................................................................4
Product overview Image....................................................................................................................................................................................................5
Control options model code........................................................................................................................................................ 5
M46 Pumps.........................................................................................................................................................................................5
System Circuit Diagram..................................................................................................................................................................6
Schematic diagram..........................................................................................................................................................................6
Electrical specifications.................................................................................................................................................................. 7
Electrical installation Pinout....................................................................................................................................................................................................8
Pin compatibility...............................................................................................................................................................................8
Input/output matrix........................................................................................................................................................................ 8
Mating connector.............................................................................................................................................................................9
Electrical Installation M46 Pumps HC EDC
Contents
L1427804 • Rev AB • September 2015 3

Literature references
References
Literature ID number Title Description
L1001029 Series 40 M46 Pumps Technical Information Complete product electrical and
mechanical specifications
Latest version of technical literature
Danfoss product literature is online at: http://powersolutions.danfoss.com/literature/
Electrical Installation M46 Pumps HC EDC
Literature references
4L1427804 • Rev AB • September 2015

Image
M46 Pump
Control options model code
M46 model code
P200148
C D E F G J RNH K L SP
M ZT
M P V C
046
N—control options
Code Description
HA EDC, high current, 12 volt, Deutsch®connector, 2-pin
HB EDC, high current, 24 volt, Deutsch®connector, 2-pin
M46 Pumps
M46 pumps are designed for medium power applications with maximum loads of 345 bar [5000 psi].
These pumps can be combined with other products in a system to transfer and control hydraulic power.
M46 pumps provide an infinitely variable speed range between zero and maximum in both forward and
reverse modes of operation.
M46 pumps are compact, high power density units. All models use the parallel axial piston / slipper
concept in conjunction with a tiltable swashplate to vary the pump’s displacement. Reversing the angle
of the swashplate reverses the flow of fluid from the pump, reversing the direction of rotation of the
motor output.
M46 pumps may include an integral charge pump to provide system replenishing and cooling fluid flow,
as well as servo control fluid flow. M46 pumps feature a range of auxiliary mounting pads to accept
auxiliary hydraulic pumps for use in complementary hydraulic systems.
M46 pumps offer proportional controls with either manual, hydraulic, or electronic actuation. An electric
three-position control is also available.
Electrical Installation M46 Pumps HC EDC
Product overview
L1427804 • Rev AB • September 2015 5

System Circuit Diagram
Input
shaft
Suction flow
Servo pressure
High pressure
Case flow
Charge pressure
Output
shaft
Cylinder
block
assembly
Filter
Charge
pump
Reservoir
Fixed displacement
motor
Cylinder
block
assembly
Heat
exchanger
Check valves
w/ high pressure
relief valve
Variable
displacement
pump
Heat exchanger
bypass
Charge relief
valve
Displacement
control
valve
Control
handle
Bypass
valve
Loop flushing
module
P100586
Schematic diagram
P109759
C2 C1
M4
M5
L2
L1 S M2
B
A
M1
D
E
flow out B
Electrical Installation M46 Pumps HC EDC
Product overview
6L1427804 • Rev AB • September 2015

Electrical specifications
Pump displacement vs. control current
P003479E
"0"
-b -a
ba
100 %
100 %
Displacement
Current mA
Solenoid electrical specifications
Voltage 12V 24V
Maximum current 1800 mA 920 mA
Coil resistance @ 20 °C [70 °F] 3.66 Ω 14.20 Ω
Coil resistance @ 80 °C [176 °F] 4.52 Ω 17.52 Ω
PWM Range 70-200 Hz
PWM Frequency (preferred)**100 Hz
Inductance 33 mH 140 mH
*PWM signal required for optimum control performance.
Electrical Installation M46 Pumps HC EDC
Product overview
L1427804 • Rev AB • September 2015 7

Pinout
Pin location
1 2
P003480
Pinout
Pin Description
1 PWM signal/voltage input
2 Ground
Pin compatibility
PLUS+1®module pin type
Pin Function
1, 2 PWMOUT/DOUT/PVG Power supply
1, 2 PWMOUT/DOUT/PVGOUT
1, 2 Power ground -
Input/output matrix
EDC/C1 and C2 location
P003 191
Electrical Installation M46 Pumps HC EDC
Electrical installation
8L1427804 • Rev AB • September 2015

Pump output flow direction versus control signal
Shaft rotation CW CCW
Coil energized*C2 C1 C2 C1
Port A in out out in
Port B out in in out
Servo port pressurized M5 M4 M5 M4
*For coil location see installation drawings in the Series 40 M46 Pumps Technical Information, L1001029..
Mating connector
Parts list
Description Quantity Ordering number
Mating connector 1 Deutsch®DT06-2S
Wedge lock 1 Deutsch®W2S
Socket contact (16 and 18 AWG) 2 Deutsch®0462-201-16141
Danfoss mating connector kit 1 K29657
Electrical Installation M46 Pumps HC EDC
Electrical installation
L1427804 • Rev AB • September 2015 9

Electrical Installation M46 Pumps HC EDC
10 L1427804 • Rev AB • September 2015