Dash DESM01 User manual

Electric
Salt & Pepper Mill
Adjustable Grinder |Battery Operated
#DESM01

Important Safeguards...................................................................... 4-7
Parts & Features................................................................................ 8-9
Assembling Your Electric Salt & Pepper Mill ............................10-12
Using Your Electric Salt & Pepper Mill ............................................14
Caring for Your Electric Salt & Pepper Mill ....................................15
Notes..................................................................................................16-17
Customer Support..............................................................................18
Warranty...............................................................................................19
Electric Salt & Pepper Mill
t
h
e
d
a
s
h
t
e
a
m
!
∙ 2 ∙ ∙ 3 ∙

Important SafeguardsImportant Safeguards
IMPORTANT SAFEGUARDS: PLEASE
READ AND SAVE THIS INSTRUCTION
AND CARE MANUAL.
IMPORTANT SAFEGUARDS: PLEASE
READ AND SAVE THIS INSTRUCTION
AND CARE MANUAL.
• Read all instructions.
• Remove all packaging and labels
from appliance prior to use.
• Make sure appliance is cleaned
thoroughly before using.
• This appliance must only be used
by or under the supervision of
aresponsible adult.
• Be sure to insert the battery with
correct positive (+) and negative
(—) polarity.
• Do not use appliance for other
than its intended use.
• Do not use the appliance if it is
damaged or has malfunctioned.
• DO NOT drop or hit the mill
against a hard object. This can
cause the mill to malfunction or
stop working completely.
• Do not immerse in any liquid;
instead use a soft wet cloth
toclean.
• Store appliance in a dry place
away from direct sunlight.
• DO NOT mix old and new
batteries. Replace all batteries
atthe same time.
• DO NOT mix Alkaline, standard
(carbon-zinc), or rechargeable
(Ni-Cad, Ni-MH, etc.) batteries.
When using electrical appliances, basic safety precautions should be
followed including:
• When the mill is not used for
more than a month, remove
the batteries from the mill to
prevent it from leaking. If it leaks,
carefully wipe away the liquid
inside the battery compartment
and replace the batteries with
anew one.
• Do not heat or disassemble
batteries and never dispose of
old batteries by throwing them
into a re.
• Do not dispose batteries into
standard garbage disposal
sites. Dispose of at available
Battery Recycle Sites after fully
discharging battery. Not doing
so may violate local disposal laws
and regulations. Please refer
to local regulations for proper
battery disposal.
• Do not place appliance on
or near a hot gas burner, hot
electric burner, or in a heated
oven.
• StoreBound shall not accept
liability for damages caused by
improper use of the appliance.
• For maintenance other than
cleaning, please contact
StoreBound directly at
1-800-898-6970 from 7AM–7PM
PT Monday–Friday or by email at
[e-mail].
∙ 4 ∙ ∙ 5 ∙

MESURES DE SÉCURITÉ IMPORTANTES MESURES DE SÉCURITÉ IMPORTANTES
Lors de l’utilisation d’appareils électriques, des précautions élémentaires
de sécurité doivent être respectées, notamment:
MESURES DE SÉCURITÉ IMPORTANTES:
VEUILLEZ LIRE ET CONSERVER CE
MANUEL D’UTILISATION
MESURES DE SÉCURITÉ IMPORTANTES:
VEUILLEZ LIRE ET CONSERVER CE
MANUEL D’UTILISATION
• Retirez tous les emballages et
étiquettes de l’appareil avant
utilisation.
• Assurez-vous que l’appareil est
nettoyé soigneusement avant
utilisation.
• Cet appareil ne doit être utilisé
que par ou sous la supervision
d’une adulte responsable.
• Veillez à insérer la batterie avec
correct positif (+) et négatif (-)
polarité.
• N’utilisez pas l’appareil pour
d’autres que son utilisation
prévue.
• N’utilisez pas l’appareil s’il
est endommagé ou a mal
fonctionné.
• NE PAS laisser tomber ou
frapper le moulin contre un
objet dur. Ceci peut provoquer
le dysfonctionnement de
l’usine ou arrêtez de travailler
complètement.
• Ne pas plonger dans un liquide;
utilisez plutôt un chiffon doux et
humide nettoyer.
• Rangez l’appareil dans un
endroit sec loin de la lumière
directe du soleil.
• NE PAS mélanger l’ancien et le
nouveau batteries. Remplacez
toutes les piles en même temps.
• NE PAS mélanger alcalin,
standard (carbone-zinc) ou
rechargeable (Ni-Cad, Ni-MH,
etc.) batteries.
• Lorsque le moulin n’est pas
utilisé pour plus d’un mois,
enlever les batteries du moulin
à l’empêche de fuir. Si ça
fuit, essuyer soigneusement
le liquide à l’intérieur du
compartiment à piles et
remplacer les piles avec un
nouveau.
• Ne pas chauffer ou démonter
piles et ne jamais jeter vieilles
piles en les jetant dans un feu.
• Ne jetez pas de piles dans
l’élimination des déchets
standard des sites. Jeter de
disponible Sites de Recyclage
de la Batterie après décharger
la batterie. Ne pas faire peut
donc violer les lois locales
d’élimination et règlements.
Se il vous plaît se référer aux
réglementations locales pour le
bon élimination de la batterie.
• Ne placez pas l’appareil sur ou
près d’un brûleur à gaz chaud,
chaud brûleur électrique, ou
dans un chauffage four.
• StoreBound n’acceptera
pas responsabilité pour les
dommages causés par mauvaise
utilisation de l’appareil.
• Pour la maintenance autre que
nettoyage, veuillez contacter
StoreBound directement à
1-800-898-6970 de 7h à 19h PT
du lundi au vendredi ou par email
à [e-mail].
∙ 6 ∙ ∙ 7 ∙

Parts & FeaturesParts & Features
Top
Milling Button
Base
Reservoir (Inside Unit)
(Bottom View)
Motor
(Inside Unit)
Coarseness Adjuster
∙ 8 ∙ ∙ 9 ∙

Assembling Your Electric Salt & Pepper Mill Assembling Your Electric Salt & Pepper Mill
1 2 3 Install six AAA batteries,
aligning the positive(+) side of
each battery with the positive
indicator on battery well,
and the negative(–) side with
thenegative indicator and
springs.
Remove the Motor.
Remove the Top by turning it
slightly counterclockwise and
lifting it from the Base.
4Fill the Reservoir with
peppercorns, coarse dry salt, or
your spice mix. Make sure to only
ll the Reservoir halfway to allow
for the Motor to be reinstalled.
∙ 10 ∙ ∙ 11 ∙ ∙ 10 ∙ ∙ 11 ∙
Assembling Your Electric Salt & Pepper Mill

6
5To reinstall the Top back
onto the Base, rotate the Top
clockwise until it slides back
into place. Your Electric Salt &
Pepper Mill is now ready to use.
Reinstall the Motor, with
batteries, back into theBase.
!
WARNING: If the Top will not lock securely into place, the Reservoir might be
overlled. If this is the case remove some of your spices and try again.
∙ 12 ∙ ∙ 13 ∙
Assembling Your Electric Salt & Pepper Mill

using your electric salt & pepper mill
12
You can adjust the grind level to
make it more ne by rotating the
Coarseness Adjuster clockwise
You can adjust the grind level to
make it more Coarse by rotating
the Coarseness Adjuster
counterclockwise.
Hold over your food and press the
Milling Button to start grinding.
∙ 14 ∙ ∙ 15 ∙
Caring for Your Electric Salt & Pepper Mill
1. Do not expose your Electric Salt & Pepper Mill to heat.
2. To clean your Electric Salt & Pepper Mill, wipe the exterior with
adampcloth.
3. Store your Electric Salt & Pepper Mill in a dry place.
4. The Electric Salt & Pepper Mill is not dishwasher safe. Do not put the
Electric Salt & Pepper Mill or any of its components into a dishwasher.
∙ 14 ∙ ∙ 15 ∙

notes notes
∙ 16 ∙ ∙ 17 ∙

WarrantyCustomer Support
STOREBOUND LLC – 1 YEAR LIMITED WARRANTY
Your Storebound product is warranted to be free from defects in material and workmanship for a
period of one (1) year from the date of the original purchase when utilized for normal and intended
household use. Should any defect covered by the terms of the limited warranty be discovered within
one (1) year, StoreBound LLC will repair or replace the defective part. To process a warranty claim,
contact customer care at 1(800) 898-6970 for further assistance and instruction. A customer Support
agent will conduct troubleshooting in an attempt to x any minor problems. If troubleshooting fails
to x the problem, a return authorization will be issued. Proof of purchase indicating date and place
of purchase is required and should accompany the return. You must also include your full name,
shipping address, and telephone number. We are unable to ship returns to a PO Box. StoreBound
will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to
provide any or all of the necessary information. Freight costs must be prepaid by the purchaser.
Send all inquiries to: [e-mail]
There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CUSTOMER. STOREBOUND SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts. Therefore, the above exclusions or limitations
may not apply to you. This warranty gives you specic legal rights and you may also have other
rights, which vary from state to state.
∙ 18 ∙ ∙ 19 ∙
7am –
7pm
Our US-based customer support team is at your service
Monday - Friday during the times below.
Reach us at 1 [phone] or suppor[email protected]
Dash values quality and workmanship and stands behind this
product with our Feel Good Guarantee™. To learn more about
our commitment to quality, visit bydash.com/feelgood.
8am –
8pm 9am –
9pm
10am –
10pm
Hey Hawaii! You can reach our customer service team from 5AM to 5PM.
And also, Alaska, feel free to reach out from 6AM - 6PM.
feel good
guarantee™
Stock #: DESM01_20180810_V5