Data Video TLM-404 Manual

General: Datavideo TLM-404 is 4x4” TFT LCD
monitors, 2U height designed for a standard EIA
19" rack. NTSC/PAL video format auto
recognition with video loop through, 75-ohm
self-terminated video output connector. The
"AUX" input provides options for external format
converters such as SDI and DV input converter.
The hinges let you pivot tilt the screen +/- 30
degrees. Contrast, brightness, color and tint
controls for optimum display quality. (Tint NTSC
only )
Specifications:
LCD Display 4" TFT LCD active matrix, resolution 480 x 234
Aspect Ratio 4:3
Brightness (luminance) 250 NITs
Video Input 1.0 Vp-p, 75 Ohm
Video Output Loop-through with 75 Ohm- self terminated
Video System NTSC/PAL auto recognition
Tally Indication Three-color Tally LED indicators
Power Consumption DC12Volt. 35 W plus (15W Aux Adapter)
Dimension 3.5” x 2.8” x 19” (H x D x W), 2U Rack space
TLM-404 INSTRUCTION GUIDE

TALLY INPUT: D Sub 15 pin connector on the rear panel
works by closing contacts between a ground pin and the
corresponding LED pin as shown on following pin out
table. Do not give power to the pins.
AUX INPUT: D Sub 9 pin connector on the rear panel. Provides
an external video input with input select interface and power
supply. It is reserved for external converters such as SDI or DV
input adaptors.