Datafox IPC Vario 10 User manual

Manual
Datafox IPC Vario 10
Flexible data collection with method

Manual Datafox IPC Vario 10 Page II date: 07.02.2013 Version: 01.00.03
Changes
Changes in this document
Date Chapter Description
06.02.2013 all New version in English
Please also follow the instructions given in the chapters of the manual. The updates are available in
the download area of our homepage www.datafox.de.
Note:
Useful information which helps you avoiding possible mistakes during the installation,
configuration and commissioning is given here.
© 2013 Datafox GmbH
This document has been created by Datafox GmbH and is copyrighted against third parties. Datafox
GmbH considers all contained information, knowledge and depictions as its sole property. All rights,
including also translation, reprint or copy of the whole document or parts of it, require written con-
sent of Datafox GmbH. The assertion of all rights in this respect is reserved to Datafox GmbH, es-
pecially in case of the grant of a patent. The handover of this documentation does not establish a
claim to the license or the use of the soft- and hardware. Copies of the floppy disks and CDs may
only be made for the purpose of data backup. Every unauthorized copy of this documentation or the
Datafox software will be prosecuted.

Content
1. For Your Safety 1
1. Introduction 2
1.1. Structure of the Documentation......................................................................................2
1.2. Guarantee Restriction.....................................................................................................2
1.3. Typography of the Documentation..................................................................................3
1.4. Important General Notes ................................................................................................3
2. Intended Use and Environmental Protection 4
2.1. Regulations and Notices.................................................................................................4
2.2. Power Supply..................................................................................................................4
2.3. Environmental Influences ...............................................................................................4
2.4. Handling of the Touch Screen Display ...........................................................................4
2.5. Maintenance / Repair......................................................................................................4
2.6. Further Notices...............................................................................................................4
2.7. Disposal..........................................................................................................................4
3. Product Description 6
3.1. Purpose ..........................................................................................................................6
3.2. Controls at the Front Side...............................................................................................6
3.3. Pin Assignment on the Back Side...................................................................................7
3.4. Pin Assignment...............................................................................................................7
3.5. Description of Interfaces.................................................................................................9
4. Installation Instructions 10
4.1. Scope of Delivery..........................................................................................................10
4.2. Environmental Conditions.............................................................................................10
4.3. Minimum Energy Consumption Mode...........................................................................10
4.4. Types of Installations....................................................................................................11
4.4.1. Installation in the Control Cabinet.................................................................................11
4.4.2. Installation on the Wall Bracket ....................................................................................11
4.4.3. Installation on a Support Arm .......................................................................................11
4.5. Program ISMM for Temperature Control ......................................................................12
5. Commissioning Instructions 13
5.1. Turning the IPC On and Off..........................................................................................13
5.2. Operation......................................................................................................................13
5.3. Description of Function/Control Keys ...........................................................................13
5.3.1. Keyboard Configuration................................................................................................14
5.3.1.1. Power Switch................................................................................................................14
5.3.1.2. Registration...................................................................................................................15
5.3.1.3. Function Keys...............................................................................................................16
5.4. Initial Setup...................................................................................................................17
5.5. Transponder Reader Integration...................................................................................18
5.5.1. HID / Key-Emulator.......................................................................................................18
5.5.2. SDK Interface ...............................................................................................................18
6. Help in case of Malfunctions 19
6.1. Troubleshooting............................................................................................................19
6.2. Restore Delivery State..................................................................................................19
6.3. Calibrate Touch Screen................................................................................................20
7. Technical Appendix 21
7.1. Appendix A – Technical Data .......................................................................................21
7.2. Appendix B – I/O Card (2 x Digital Input, 2 x Relay Output).........................................22
8. Index 24
Manual Datafox IPC Vario 10 Page III date 07.02.2013 Version: 01.00.03

1. For Your Safety
Safety Information for Datafox Products
The device must only be operated according to the instructions
given in the manual.
Do no insert any foreign objects into the openings and ports.
The device must not be opened. All maintenance work must only
be performed by authorized specialists.
Some devices contain a lithium ion battery or a lithium battery.
Do not throw into fire!
Caution! Supply voltage: 12 V DC via DC connector
12 V / 24 V flat plug for vehicle connection
See respective type label / technical data.
The device must only be operated with a power-limited power supply
according to EN 60950-1. If you do not observe these instructions,
the device may be damaged.
The following temperature ranges must be observed:
Environmental temperature range 0 °C (32 °F) to 40 °C (104 °F)
See also chapter „ambient conditions“.
In areas with cellphone ban, GSM, WLAN and other cellular modems
must be turned off.
Persons with heart pacemakers:
When using the device, maintain a distance of at least 20 cm between the
heart pacemaker and the device in order to avoid possible interferences.
Turn the device off immediately if interferences are assumed.
Protection class: Observe the technical data of the respective device.
Manual Datafox IPC Vario 10 Page 1 date: 07.02.2013 Version: 01.00.03

1. Introduction
1.1. Structure of the Documentation
The manual contains a change history as well as a general part with safety information, the intro-
duction and information concerning system requirements and system structure.
The general part is followed by the main part of the manual. It contains the chapter Product Descrip-
tion. In this chapter, device-specific components are described as well as the device's functions.
The final part of the manual provides technical data about the device and a glossary whose purpose
it is to ensure a consistent understanding between user and manufacturer.
1.2. Guarantee Restriction
All installers are responsible for the use of the device and its accessories in accordance with its in-
tended purpose and in compliance with the applicable laws, standards and directives.
All data in this manual has been checked carefully. Nevertheless, errors cannot be excluded. There-
fore, we offer no guarantee nor accept any liability for consequences that derive from errors of this
manual. Of course we are grateful if you point out errors to us. We reserve the right to make modifi-
cations in respect of technical progress. Our general terms and conditions of business apply.
Manual Datafox IPC Vario 10 Page 2 date: 07.02.2013 Version: 01.00.03