Daum electronic Premium 8 User manual

User Manual

Table of Contents
Miscelleaneous
2
This ergometer bike is specially designed for health and endurance training.
High quality manufacturing, an easy to read dashboard, and ease of use and
of maintenance contribute to make this appliance an ideal training device for
sport and fitness training. We would also stress that the complete equipment
list and the convincing performance range appeal to athletes and fitness conscious
persons of every age group.
Introduction
Designed and manufactured in conformity with the DIN EN 957 1/-5 Class SA/HA
standard, the ergo_bike is suited for a therapeutic utilisation (It does not meet
the requirements for medical diagnosis usage in medical clinics). An important
aspect, and therefore an identifying feature, of an ergometer is the fact that the
required pedalling resistance in watt can be prescribed. This pedalling resistance
will be maintained irrespective of the pedalling speed (as shown on the diagram
of page 33).
This means that the user can work out under a steady load at various speeds,
and unconstrained by the speed. The advantage being that the user cannot
unknowingly be subjected to a wrong load.
At the heart of the ergo_bike is the full electronically controlled, maintenance
free, eddy current brake, which adjusts the braking load to fit the users personal
requirements based on the computed data, and which allows load setting
continuously from 20 to 600 Watt.
The ergo_bike premium8i is thus more than just a Home Trainer, since it can
be used for sportive and therapeutic objectives.
Miscellaneous
- Introduction ........................................................................... 2
- Keywords Glossary / Info Texts .................................................. 2
- Data Interface .............................................................................................. 2
Safety Notes
- Using the Device in Compliance with the Recommendations ..................... 3
- The user ..................................................................................... 3
- User Safety ............................................................................. 3
- Notes From the Manufacturer to the User ............................... 3
- Accessories ............................................................................ 3
- Software ..................................................................................... 3
- Documentation ........................................................................... 3
- Other Notes .............................................................................. 3
- Information About Personal Safety .......................................... 3
Setting Up
- Control Elements and Connections ........................................... 4
- Switching On / Off .................................................................... 5
- Saddle adjustment ...................................................................... 5
- Handlebars adjustment ............................................................. 5
- Notes about Pulse Rate Measure ............................................ 6
The Dashboard
- Top panel - Overview of the control elements ................................. 7
- Underside - Overview of the connectors ................................... 7
Dashboard User Guide
- Switching On ............................................................................ 8
- Starting Training Without Selecting a Program ......................... 8
- Setting Personal Data ................................................................. 8
- Starting Training by Selecting a Program .................................. 9
- Training Programs .................................................................... 9 - 10
- Setting Limit Values ................................................................ 10 - 11
- Reviewing Stored Training Data ............................................. 11 - 12
- Fitness Test and Fitness Mark ............................................... 12
- Relax Function .............................................................. 12 - 13
- Premium programs ........................................................ 13 - 14
- Premium Coaching ......................................................... 15 - 20
- System Software Update Using the Card .................................. 21
- Keywords Glossary .................................................................... 21
- MP3 Player ................................................................................. 22
- TeamAward ..................................................................................... 23
Keywords Glossary / Info Texts
Please refer to the information concerning each operation`s status stored in the
dashboard. Use the Info-key to display this information.
The keywords glossary provides additional information and explanations.
The keywords glossary and the info-texts are an essential part of this user
manual.
General Notes
- Important Notes ....................................................................... 24
- Training Hints ...................................................................................... 24
- Environmental Conditions .................................................................... 24
- Used Symbols .................................................................................. 24
- Compliance to Standards ..................................................................... 24
Maintenance
- Troubleshooting ................................................................................. 25
EC Declaration of Conformity .................................................................... 26
Specifications ................................................................................ 27
Assembly and Installation Guide
- Assembly Notes ..................................................................... 27
- Package content ....................................................................... 28
- Tools and Small Parts ................................................................. 28
- Installation steps 1 - 7 ..................................................... 29 - 31
Service
- Liability ......................................................................................... 32
- Replacement of the Dashboard Battery ............................................ 32
- Replacing the V-belt .......................................................................... 32
Tables and Diagrams
- Table of Target Heart Rate / Aerobic Zone ......................................... 33
- Overview Diagram of the Target Heart Rate ..................................... 33
- Speed Power Diagram .................................................................... 34
Accessories
- ergo_memo-card2 .............................................................................. 35
- Ear Clip .............................................................................................. 35
- Relax Sensor ..................................................................................... 35
- Cardio Sensor Chest Strap ................................................................... 35
- Triathlon Handlebars add on....................................................................................35
Warranty Conditions ............................................................. 36
GNU General Public License ..................................................... 37 - 39
Data-Interface
You can use a personal computer (PC) to control the ergo_bike premium8i.
A special data cable is needed to this effect, which you can order from daum
electronics gmbh.

!
Safety Notes
3
Using the Device in Compliance with the Recommendations
The ergometers of the ergo_bike premium8i series may be used exclusively for
ergomettry, cardiovascular rehabilitation and for kinesitherapy.
Their use is only allowed in compliance with the instructions of the user manual.
The manufacturer will not be held liable if the ergometer is not used in compliance
with the provided instructions and consequently causes injury to persons or
other severe consequences, as well as material damages.
The CE label covers only the accessories included in the package.
Every user of this device, who is concerned with assembling, maintaining, testing
or troubleshooting it, must read and understand the contents of this user manual
before starting to work on the device.
The quality assurance system used at daum electronic gmbh complies with the
DIN EN ISO 13485:2003 standard.
daum electronic gmbh considers itself to be liable for the safety, reliability and
functionality of the device only if:
- the device is used in compliance with the instructions of the user manual.
The user
Please read the user manual carefully before starting to use the training device.
The user manual should be kept in the direct vicinity of the ergo_bike premium8i.
It is an integral component of the device.
User Safety
When coupling many devices to a test site care must be taken to avoid any
danger arising from the summation of the leakage currents and to ensure the
potential equalisation is effected through a common current (power) supply (e.g.
a wall socket-outlet). If you have any questions please ask your dealer or the
service department of daum electronic gmbh.
If a socket with multiple outlets is installed after the initial start-up, no other
device may be connected to this socket. (use covers on the multiple sockets)
An electrical shock hazard exists when touching devices that are not separately
grounded.
Defective or faulty devices and accessories may not be used.
The personal computer and all other connected devices (e.g. monitor, printer,
etc) must be installed at least 1.5m away from the training place, because
leakage currents could be generated on the housing (or use separate grounding,
housing leakage current).
Notes From the Manufacturer to the User
The device is not protected against the infiltration of liquids.
Direct contact with humidity or liquids must absolutely be avoided.
Care must be taken to wipe out sweat drops after training (sweat attacks paint
and plastic parts)
Damages caused by sweat are not covered by the warranty
Accessories
The device may only be used with the accessories prescribed and distributed
by daum electronic gmbh.
Every accessory item and every device connected must be manufactured in
conformity with the corresponding standard, e.g. DIN EN 60950 for computer
devices, DIN EN 60601-1 for electromedical devices.
Software
The supplied software may only be copied and archived for safety and functional
reasons. In special cases a request must be addressed in writing to daum
electronic gmbh. Releasing it to non-authorised persons is not allowed. The
ergo-bike premium8i may only be used with the internal and external softwares
supplied and authorised by daum electronic gmbh.
Documentation
The documentation supplied is an integral part of the ergo_bike premium8i and
may only be copied or distributed with the authorisation of daum electronic gmbh.
Other Notes
All the diagrams and evaluations are to be considered as a suggestion from the
device. When providing a diagnosis the results must always be controlled and
evaluated by a qualified physician.
The electronic installations of the rooms where the device will be used must
absolutely comply with the requirements of directive VDE 0107.
The device is not suited for operation in rooms and / or areas with explosion
risks.
Cellular telephones may not be used in the direct vicinity of the device, otherwise
they may interfere with its functionality.
Wireless telephones may be used.
Electromagnetic interference are primarily characterised by the oscillation of the
displayed load value. If the displayed value varies uncontrollably frequently,
even when the speed is higher than 30 /min, this can be an effect of electromagnetic
compatibility (EMC).
Only cables certified by daum electronic gmbh may be used to connect the
device with other devices.
Information About Personal Safety
The ergo_bike ergometer is intended for adults. Children
should only be allowed to train with the ergometer under adult
supervision.
Persons suffering from any of the following diseases should consult their family
physician or a specialist before starting training with the ergo_bike.
- Heart disorders like angina pectoris, coronary thrombosis (infarct),
stenosis, and high blood pressure
- Diabetes
- Respiratory disorders like asthma, chronic bronchitis, etc.
- Rheumatism
- Gout
- Or any other disease or illness
You should never train when you feel ill or weak.
Persons who are not used to exercise must start with an easy training program,
and then increase the load intensity very gradually. Persons with declared health
problems must evaluate their personal risks with the help of their family physician.
You should never use the ergo_bike to find out your maximum degree of
physical endurance. This can have serious consequences on your health!
Training Conditions
You should pay attention to providing good training conditions; this includes
choosing the training room and installation place. Makeshift installation places
do not incite to training!
Note!
You will find more information about training for sport and health in the pocket
book Training with the bike ergometer Improvement of health and fitness as
training target with the ergo_bike (in German).
Order from: daum electronic gmbh
Flugplatzstr. 100
D-90768 Fürth
Fax ++49(0)911/753714
GB

4
Setting Up
Contol Elements and Connections
1Dashboard
2 Clamp screw for the handlebars
3 Articulation (hinge) of the handlebars column
4 Interfaces and connectors
5 Handlebars continuously adjustable over 360°
6 Height adjustment of the handlebars
7 Stand-foot with roller casters
8 Name plate
9 Stand-foot with ground level adjustment
10 On/Off switch
11 Height adjustment of the saddle
12 Saddle column
13 Horizontal adjustment of the saddle
14 Saddle
4
5
1
7
11
12
2
6
3
9
8
10
13
14
35
150
KG
daum electronic GmbH
D-90768 Fürth
ergo-bike premium
230V
~
50Hz 50W
123456789101112
200
SN
P
Made in Germany
z
1011

5
Setting Up
2
1
13cm
A
-/+ 45° continuous
B
(or M8x40 screw)
ergo_memo-card2
Protection
slider
18 levels
Vertical adjustment
Loosen the spring loaded tommy head button 2by one to two turns, and then
pull it out. Move the saddle column up or down to the required height. Release
the tommy head button and move the saddle column a little bit up or down until
the protruding red safety button on the tommy head button locks in. Then tighten
the tommy head button.
For safety reasons height adjustment is only possible up to level 18!
safety button
Handlebars adjustment
Loosen slightly the articulation (hinge) of the handlebars column (with allen
wrench no 10). You can now swivel the complete handlebars and dashboard
unit into the required position. Then tighten the hinge again.
Loosen the handlebars with star knob B as appropriate for its set position, turn
it to the required position and tighten it back.
(Please use the supplied M8x40 screw in place of the star knob B if the handlebars
is subjected to a heavy load, e.g. in the case where you pedal standing on the
pedals and laying your weight on the handlebars.)
You can adjust position of the dashboard in the same way by means of the
tommy screw A.
Switching ON / Off
Please read the safety notes before switching the ergo_bike premium8i on, and
follow the installation and assembly instructions.
Insert the ergo_memo-card2 in the dashboard before switching the device on.
Use the On/Off switch " I " on the lower rear section of the device to switch it
on and off.
3
On / Off power switch
Saddle adjustment
Horizontal adjustment
Loosen the lever 1 slide the saddle to the required position and then tighten
the lever again.
The lever should point to the rear after tightening. Pull and turn the lever to point
to the rear.
- risk of injury.
When switched on, the system takes about 1 minute to load the software. The
colour screen displays during this time a software load progress bar.
Wait for the beep signal before using the dashboard.
If the memory card is inserted after the device is switched on then you must
wait for the beep signal. This can take about 5 seconds.
In principle the memory card should be pulled out while you are not pedalling
or only after the beep signal!
The protection slider on the ergo_memo-card2 must point to the bottom when
the card is inserted into the dashboard. This will make it possible to write to the
card.
If the slider points upward the card is locked/write protected.
If the card is empty it will be initialised. Only then can you use a computer to
save e.g. mp3 files (in the \mp3 folder) or update files (in the \update folder) on
the card.
GB